Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

Corrosion Issues In Sweet And Sour Oil & Gas Wells

Corrosion Issues in Sweet and Sour Oil & Gas Wells
Available for download

The unstable oil market demand in the petroleum industry, the oil financial crisis and the Covid-19 pandemic have pushed the Oil and Gas operators to look for optimized, cost effective and more reliable strategies of design and operation. Large part of CAPEX is invested in the well materials. Hence, materials of Oil and Gas wells should be selected to withstand both internal and external threats to ensure integrity and availability while maintaining on focus on affordability over the lifecycle.1 

Product Number: 51322-18150-SG
Author: Janardhan Rao Saithala, Amjad Kharusi, Boris Thomas, Al Toqi Hamood, Mohammed Ghafri, Muatasam Aulaqi, Manal Al Badwawi, Talal Nabhani, Nasser Behlani
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings
$0.00
$20.00
$20.00

Material selection of oil and gas wells must be reliable, cost-effective, and meet corrosion resistance criteria during a well-operating lifecycle. During a well lifecycle, significant changes can occur in the fluids produced or the way wells are operated. Some anticipated and unanticipated changes can occur during design life, and material selection shall be adequate for primary and secondary exposures from design to final abandonment. Various well components such as Christmas tree, wellhead, production tubing, tubing hanger, downhole jewelry, elastomers, and surface casing are exposed to excursions during production/interventions. Any level of corrosion of these critical components is not acceptable, and the compromise of the integrity of these components could result in functional failure and incur production deferment and HSE consequences. Materials of these components are continuously exposed to corrosion risks due to reservoir souring, sand production, water breakthrough, acid stimulation, poor cementing, lack of cathodic protection etc., and directly impact the performance of well integrity barriers. This paper aims to share field experience of unexpected corrosion failures of various materials exposed to excursions during production, well interventions, acid stimulations, annulus fluid changes etc. A review of contributing factors in corrosion of materials in Oil and Gas wells were discussed. 

Material selection of oil and gas wells must be reliable, cost-effective, and meet corrosion resistance criteria during a well-operating lifecycle. During a well lifecycle, significant changes can occur in the fluids produced or the way wells are operated. Some anticipated and unanticipated changes can occur during design life, and material selection shall be adequate for primary and secondary exposures from design to final abandonment. Various well components such as Christmas tree, wellhead, production tubing, tubing hanger, downhole jewelry, elastomers, and surface casing are exposed to excursions during production/interventions. Any level of corrosion of these critical components is not acceptable, and the compromise of the integrity of these components could result in functional failure and incur production deferment and HSE consequences. Materials of these components are continuously exposed to corrosion risks due to reservoir souring, sand production, water breakthrough, acid stimulation, poor cementing, lack of cathodic protection etc., and directly impact the performance of well integrity barriers. This paper aims to share field experience of unexpected corrosion failures of various materials exposed to excursions during production, well interventions, acid stimulations, annulus fluid changes etc. A review of contributing factors in corrosion of materials in Oil and Gas wells were discussed. 

Product tags
Also Purchased
Corrosion Investigation Of Five Stainless Steels In Oil-Gas-Water Multiphase Flow Containing H2S, CO2 And Chloride
Available for download

Corrosion Investigation Of Five Stainless Steels In Oil-Gas-Water Multiphase Flow Containing H2S, CO2 And Chloride

Product Number: 51322-18121-SG
Author: Peike Zhu, Honglan Zou, Qinghua Wang, Junzheng Yang, Yanzhao Yu
Publication Date: 2022
$20.00

M. B. Kermani pointed out that 25% of equipment failures in the oil and gas industry are caused by corrosion, and more than half of corrosion events are related to produced fluids containing CO2 and H2S. In recent years, the exploitation of sour oil and gas fields (containing H2S or H2S/CO2 mixture) has become more and more common, and prominent problems such as tubing ruptures caused by pitting and uniform corrosion have appeared. In oil fields containing CO2 and H2S, local corrosion is a key factor restricting the selection of tubing and casing materials. In an oilfield containing CO2 and H2S in the Middle East, the authors corroded coupons on site, and carried out indoor simulation experiments for the problems found in the field test. The authors systematically studied 13Cr, S13Cr, 22Cr, 25Cr and 2550 in the presence of H2S, CO2 and high mineralization. 
Picture for Corrosion Inhibitors Use: Case Study For Guinea Gulf Assets Application
Available for download

Corrosion Inhibitors Use: Case Study For Guinea Gulf Assets Application

Product Number: 51322-17663-SG
Author: Alvaro Mpaka Sousa, Laurent Dehays, Francisco Mateus Garcia, Mioara Stroe, Raquel Eduarda Araujo
Publication Date: 2022
$20.00

Carbon steel (CS) material is widely used for the equipment in oil and gas production industry due to its mechanical properties associated with a relatively low cost, compared to other materials. Depending on the corrosiveness of the fluid that is vehiculated, the use of carbon steel is generally associated with the injection of a corrosion inhibitor (CI) in order to mitigate internal corrosion. Corrosion inhibitors are generally used in continuous injection at an injection rate that is depending on the corrosiveness of the fluid. Based on the operational feedback, the internal standards are recommending for multiphase pipelines CI injection rates in the range of 50 - 70 ppm for temperature below 80°C of and of 150 to 200ppm for temperatures above 100°C. These injection dosages are typical values that are considered in the laboratory tests for the qualification of the CI and they are adjusted on-site based on the monitoring results.
Picture for Corrosion Of Gathering Pipelines In Oil And Gas Field And Its Mitigation Measures In China
Available for download

Corrosion Of Gathering Pipelines In Oil And Gas Field And Its Mitigation Measures In China

Product Number: 51322-17741-SG
Author: Anqing Fu, Juntao Yuan, Zihan Chen, Xuanpeng Li, Naixin Lv, Wensheng Li, Lei Fan, Houbu Li
Publication Date: 2022
$20.00

The exploration and development of oil and gas resources towards the direction of ultra-deep, low permeability, and unconventional in China. In addition, some oil and gas fields have developed into the middle or late stage, the application of various EOR technologies, such as acid fracturing, CO2 flooding, air foam flooding and polymer flooding, resulting in the service environment of oil and gas gathering pipelines becoming more and more complex and harsh, such as high temperature, high pressure, high H2S/CO2, Cl- and bacteria, corrosion failures became one of the biggest challenges of oil and gas gathering pipelines.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support