Search
Filters
Close

Corrosion And Chemical Characterization Of Bio-Oils From Biomass With Varying Ash And Moisture Contents

Product Number: 51321-16726-SG
Author: James R Keiser; Gavin L Warrington; Samuel A Lewis; Sr, Raynella M Connatser; Jiheon Jun; Jun Qu; Kyungjun Lee; Michael P Brady
Publication Date: 2021
$0.00
$20.00
$20.00

As part of the Feedstock Conversion Interface Consortium four samples of pine chips (all combinations of low and high moisture and ash content) were collected and processed for fast pyrolysis. The prepared biomass samples were liquefied at the National Renewable Energy Laboratory (NREL) using the fast pyrolysis process. Following some characterization of the biooils at NREL, the bio-oils were shipped to Oak Ridge National Laboratory (ORNL) for corrosion testing and further characterization.
The content and composition of ash in each bio-oil was determined. Corrosion testing consisted of exposing selected metallic and elastomer samples for 1000 hr at 50°C and for longer times at room temperature as well as electrochemical impedance spectroscopy measurements to assess relative corrosivity of the bio-oils. Chemical characterization was conducted to identify the corrosive component of the bio-oils as well as to define the chemical differences among the oils. It was hypothesized that there could be a catalytic effect from the higher ash content in two of the biomass sources. Results of these characterization and corrosion studies will be
reported.

As part of the Feedstock Conversion Interface Consortium four samples of pine chips (all combinations of low and high moisture and ash content) were collected and processed for fast pyrolysis. The prepared biomass samples were liquefied at the National Renewable Energy Laboratory (NREL) using the fast pyrolysis process. Following some characterization of the biooils at NREL, the bio-oils were shipped to Oak Ridge National Laboratory (ORNL) for corrosion testing and further characterization.
The content and composition of ash in each bio-oil was determined. Corrosion testing consisted of exposing selected metallic and elastomer samples for 1000 hr at 50°C and for longer times at room temperature as well as electrochemical impedance spectroscopy measurements to assess relative corrosivity of the bio-oils. Chemical characterization was conducted to identify the corrosive component of the bio-oils as well as to define the chemical differences among the oils. It was hypothesized that there could be a catalytic effect from the higher ash content in two of the biomass sources. Results of these characterization and corrosion studies will be
reported.

Also Purchased
Picture for Bio-Oil Properties and Effects on Containment Materials
Available for download

51314-4423-Bio-Oil Properties and Effects on Containment Materials

Product Number: 51314-4423-SG
ISBN: 4423 2014 CP
Author: James Keiser
Publication Date: 2014
$20.00
Picture for Corrosion Susceptibility of Different Alloys in Pyrolysis Oils
Available for download

51314-3772-Corrosion Susceptibility of Different Alloys in Pyrolysis Oils

Product Number: 51314-3772-SG
ISBN: 3772 2014 CP
Author: Preet Singh
Publication Date: 2014
$0.00