Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

51314-3848-Correlating Flow Dynamics and Fluid Characteristics with Internal Corrosion Management in Pipelines

Picture for Correlating Flow Dynamics and Fluid Characteristics with Internal Corrosion Management in Pipelines
Available for download
Product Number: 51314-3848-SG
ISBN: 3848 2014 CP
Author: Mohsen Achour
Publication Date: 2014
$0.00
$0.00
$0.00
For a given production system the corrosion mitigation philosophy is usually established based on the fluid properties and the operating parameters pre-identified within the Basis of Design (BOD). Information in the BOD comes from reservoir simulation process/flow modeling and thermodynamic/ compositional fluid analyses. These data have limited accuracy and a wide variability throughout the field life. Very often and due to capital expenditure (CapEx) constraints most of production facilities primarily utilize carbon steel lines with corrosion mitigation provided by injection of chemical inhibitors.When using carbon steel and inhibition a successful operation requires active corrosion monitoring to keep tabs on effectiveness of the chemical inhibition program. The monitoring program is a key to proactively identify new corrosion mechanisms surfacing during the field operation. Due to the wide variety of operating conditions it is not practical to run laboratory corrosion tests simulating every production scenario. Most of the corrosion predictions rely heavily on the laboratory test results; however the tests have limitations and may not precisely cover all of the corrosion mechanisms in predicting field performance. Depending on new mechanisms identified by the corrosion monitoring program corrective actions are usually taken. These actions may include additional chemical treatments and mechanical systems such as pigging to bring the corrosion under control.This paper discusses some of the interesting corrosion mechanisms that have emerged in production systems due to changes in operating conditions during field operations. Corrosion monitoring data with fluid analyses flow modeling and additional laboratory testing have been effectively used to understand the corrosion mechanism and develop solutions for control. This work focuses on internal corrosion control of carbon steel in production and transportation lines with single or multiphase flow.
For a given production system the corrosion mitigation philosophy is usually established based on the fluid properties and the operating parameters pre-identified within the Basis of Design (BOD). Information in the BOD comes from reservoir simulation process/flow modeling and thermodynamic/ compositional fluid analyses. These data have limited accuracy and a wide variability throughout the field life. Very often and due to capital expenditure (CapEx) constraints most of production facilities primarily utilize carbon steel lines with corrosion mitigation provided by injection of chemical inhibitors.When using carbon steel and inhibition a successful operation requires active corrosion monitoring to keep tabs on effectiveness of the chemical inhibition program. The monitoring program is a key to proactively identify new corrosion mechanisms surfacing during the field operation. Due to the wide variety of operating conditions it is not practical to run laboratory corrosion tests simulating every production scenario. Most of the corrosion predictions rely heavily on the laboratory test results; however the tests have limitations and may not precisely cover all of the corrosion mechanisms in predicting field performance. Depending on new mechanisms identified by the corrosion monitoring program corrective actions are usually taken. These actions may include additional chemical treatments and mechanical systems such as pigging to bring the corrosion under control.This paper discusses some of the interesting corrosion mechanisms that have emerged in production systems due to changes in operating conditions during field operations. Corrosion monitoring data with fluid analyses flow modeling and additional laboratory testing have been effectively used to understand the corrosion mechanism and develop solutions for control. This work focuses on internal corrosion control of carbon steel in production and transportation lines with single or multiphase flow.
Product tags
Also Purchased
Picture for Pipeline Integrity Management Through Internal Corrosion Monitoring
Available for download

51314-3834-Pipeline Integrity Management Through Internal Corrosion Monitoring

Product Number: 51314-3834-SG
ISBN: 3834 2014 CP
Author: Abdul Razzaq Al-Shamari
Publication Date: 2014
$0.00
Picture for Pipeline Corrosion Management; a Compendium
Available for download

51314-3723-Pipeline Corrosion Management; a Compendium

Product Number: 51314-3723-SG
ISBN: 3723 2014 CP
Author: Bijan Kermani
Publication Date: 2014
$0.00

This paper summarizes major elements of a recent recommended practice (RP) on Pipeline Corrosion Management (PCM) published by the European Federation of Corrosion (EFC). The RP goes into details on a methodical approach to carrying out PCM.
Picture for Effects of crude oil on corrosion behavior of pipeline steel under co2 condition
Available for download

51314-3846-Effects of crude oil on corrosion behavior of pipeline steel under co2 condition

Product Number: 51314-3846-SG
ISBN: 3846 2014 CP
Author: Liang Wei
Publication Date: 2014
$0.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support