AMPP Store - Coatings and Linings

Available for download

NACE SP0291-2023, Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

Product Number: NACE SP0291-2023

Publication Date: 2023

$109.00

This standard practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incom- patible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbond- ment) reduces coating effectiveness and results in premature coating failure.

Available for download

NACE SP0295-2008, Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

Product Number: 21070-SG

Publication Date: 2008

$179.00

HISTORICAL DOCUMENT. Surface preparation, coatings, application, inspection, and quality tests for coating a tank car. Corrosion and product contamination must be considered in the design of tank cars transporting liquids.

Available for download

NACE SP0295-2022, Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

Product Number: NACE SP0295-2022

Publication Date: 2022

$109.00

This standard practice has been prepared for the rail tank car industry to address the need for high-quality application of coatings to the interior surfaces of rail tank cars carrying a variety of chemicals at various temperatures. Qualified inspection of the completed coating system and testing with the use of adequate, readily available instruments also are covered.

Coating manufacturers, coating applicators, and those who have contracting authority for rail tank car internal coating instllation should be able to use this standard to ascertain the procedures, facilities, equipment, and personnel needed to satisfy the requirements for coating systems for rail tank cars in chemical service.

Available for download

NACE SP0298-2023, Sheet Rubber Linings for Abrasion and Corrosion Service

Product Number: NACE SP0298-2023

Publication Date: 2023

$109.00

STABILIZATION NOTICE: This document has been declared “Stabilized” by AMPP Standards Committee (SC) 04 and will no longer be subjected to periodic reviews for currency.

The purpose of this standard practice is to outline procedures for providing sheet rubber lining protection to new and used equipment, such as piping and vessels. Included are recommendations for surface preparation and the dimensions of piping that can be rubber lined. An explanation of types of rubber lining materials available and their methods of cure are also given.

Available for download

NACE SP0315-2015/IEEE Std 1835-SG, "Standard for Atmospheric (Above Grade) Corrosion Control of Existing Electric Transmission, Distribution, and Substation Structures by Coating Systems"

Product Number: 21188-SG

ISBN: 1-5790-309-1

Publication Date: 2015

$109.00

Procedures to (1) assess corrosion (2) determine risk of corrosion and degradation (3) make decisions whether coating repair is needed (4) apply repair coatings.

Available for download

NACE SP0386-2007 (formerly RP0386), Application of a Coating System to Interior Surfaces of Covered Steel Hopper Railcars in Plastic, Food, and Chemical Service

Product Number: 21033-SG

Publication Date: 2007

$179.00

HISTORICAL DOCUMENT. Requirements for expert application of coatings to the interiors of steel hopper rail cars. Inspection of coatings and testing by instruments. Facilities, equipment, personnel. Plastic, food, and chemical industries.

Available for download

NACE SP0386-2022, Application of a Coating System to Interior Surfaces of Covered Steel Hopper Rail Cars in Plastic, Food, and Chemical Service

Product Number: NACE SP0386-2022

$109.00

This standard practice encompasses the requirements for expert application of a quality coating system to the interior surfaces of covered steel hopper rail cars that have been prepared to a specified, recognized standard. Qualified inspection of the completed coating system and testing by the use of adequate, readily available instruments are also covered in this standard.

Available for download

NACE SP0395-2022, Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars

Product Number: NACE SP0395-2022

Publication Date: 2022

$109.00

This standard defines the requirements for fusion-bonded epoxy (FBE) powder coatings applied by electrostatic spray or other suitable method to deformed and plain steel reinforcing bars that are suitable for fabrication after coating. This standard includes requirements and guidelines for ordering, cleaning, coating, inspecting, handling, transporting, and installing the coated steel reinforcing bars.

Available for download

NACE SP0398-2023, Recommendations for Training and Qualifying Personnel as Rail Car Coating and Lining Inspectors

Product Number: NACE SP0398-2023

Publication Date: 2023

$109.00

This standard provides guidelines to assist employers in identifying the basic requirements for the in-house training, testing, and qualification of personnel who perform coating or lining inspections for a specific application or project. The qualification procedures outlined in this standard are not, and should not be interpreted to be, a substitute for or alternative to the AMPP Coating Inspector Program (CIP). An employer may elect to incorporate the CIP into its coating inspector qualification program or to use CIP as a partial or complete substitute for an in-house program.

Available for download

NACE SP0495-2023, Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industry

Product Number: NACE SP0495-2023

Publication Date: 2023

$109.00

This AMPP standard practice provides guidelines for qualifying personnel as abrasive blasters and coating and lining applicators in the rail industry. The intent of this standard is to foster personal growth of the individuals and technical continuity in the areas of surface preparation and coating and lining of railcar equipment. This standard outlines a formal system of training and qualification that recognizes the knowledge, skill, and technical competency of the individuals engaged in this work.

This standard is intended for use by employers, managers, and others in the rail industry who have a need for such guidelines in their efforts to provide suitable training and qualification of their abrasive blasters and coating and lining applicators to comply with regulations, meet customer requirements, and enhance the effectiveness of their operations.

Available for download

NACE SP0516-2022, Guidelines for Data Collection and Analysis of Railroad Tank Car Interior Coating/Lining Condition

Product Number: NACE SP0516-2022

Publication Date: 2022

$109.00

This AMPP standard is specifically targeted for use by tank car owners, operators, and repairers who are seeking guidanceincomplyingwithfederalregulationsregardinginteriorcoating/liningconditiondatacollectionandanalysis.It should be noted that issues similar to those discussed here may arise with other bulk liquid transportation containers, and this document may find applicability in those areas as well.

Available for download

NACE SP0592-2006, Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service

Product Number: 21057-SG

Publication Date: 2006

$179.00

HISTORICAL DOCUMENT. Coatings application to the interiors of rail tank cars handling concentrated sulfuric acid at ambient temperatures. Inspection of completed coating. Testing. Surface prep. Materials Inspection.

Coatings and Linings

Association for Materials Protection and Performance