Menu
Search
Filters
Close
Menu

Adsorption of Model Inhibitor Compound Characterized Using Quartz Crystal Microbalance with Dissipation Monitoring

Picture for Adsorption of Model Inhibitor Compound Characterized Using Quartz Crystal Microbalance with Dissipation Monitoring
Available for download

Oil and gas transportation pipelines are often prone to internal corrosion in service environments. Two main strategies used to combat the problem of internal corrosion in pipelines involve the use of corrosion inhibitors (CIs) and more corrosion resistant alloys. Corrosion mitigation using inhibitors is a favorable choice because of better economic feasibility.

Product Number: 51323-19145-SG
Author: Kushal Singla, Hubert Perrot, Bruce Brown, Srdjan Nesic
Publication Date: 2023
$0.00
$20.00
$20.00

Although inhibitor adsorption and inhibition mechanisms have been studied extensively using various electrochemical techniques, these electrochemical techniques only provide an indirect estimate of inhibitor adsorption. In the present study, a QCM with dissipation monitoring (QCM-D) was used to investigate the adsorption on gold coated quartz crystal resonator (QCR) of a model corrosion inhibitor (CI) compound at different bulk inhibitor concentrations. In a first step, the classical Sauerbrey’s equation was used to analyze the normalized frequency change data for estimation of adsorbed mass. Normalized frequency change was also analyzed in conjunction with dissipation change using small load approximation (SLA) model to establish the nature of adsorbed layer and to qualify the validity of Sauerbrey’s equation. In context of the bulk inhibitor concentrations tested (50 ppm(w) and 100 ppm(w) of CI in 1wt.% NaCl solution) in this study, the adsorbed layer behaves as a rigid mass. A conscious effort is made to state and validate the assumptions for the analysis of experimental results.

Although inhibitor adsorption and inhibition mechanisms have been studied extensively using various electrochemical techniques, these electrochemical techniques only provide an indirect estimate of inhibitor adsorption. In the present study, a QCM with dissipation monitoring (QCM-D) was used to investigate the adsorption on gold coated quartz crystal resonator (QCR) of a model corrosion inhibitor (CI) compound at different bulk inhibitor concentrations. In a first step, the classical Sauerbrey’s equation was used to analyze the normalized frequency change data for estimation of adsorbed mass. Normalized frequency change was also analyzed in conjunction with dissipation change using small load approximation (SLA) model to establish the nature of adsorbed layer and to qualify the validity of Sauerbrey’s equation. In context of the bulk inhibitor concentrations tested (50 ppm(w) and 100 ppm(w) of CI in 1wt.% NaCl solution) in this study, the adsorbed layer behaves as a rigid mass. A conscious effort is made to state and validate the assumptions for the analysis of experimental results.

Product tags
Also Purchased
Picture for Qualification of Low Temperature Cure, Thin-Film Linings for Aboveground Storage Tanks
Available for download

Qualification of Low Temperature Cure, Thin-Film Linings for Aboveground Storage Tanks

Product Number: 51323-18767-SG
Author: Haralampos Tsaprailis, Shan Rao, Jiajun Liang
Publication Date: 2023
$20.00

This paper presents the laboratory qualification program utilized to compare four lining systems for application down to -10°C (14°F). The lining systems were applied and cured at -10 °C (14 °F). Cure of the lining systems was monitored using differential scanning calorimetry and adhesion testing, while the performance of the linings was evaluated using electrochemical impedance spectroscopy, and autoclave and standard atlas cell testing. One of the four lining systems, Product C, a 71% volume solids epoxy that contained zinc phosphate, exhibited the most potential for low temperature field implementation.
Picture for Synthesis of Silane-Modified Nanoparticles-Based Corrosion Inhibitor for Acidic Corrosion
Available for download

Synthesis of Silane-Modified Nanoparticles-Based Corrosion Inhibitor for Acidic Corrosion

Product Number: 51323-18882-SG
Author: Norah Aljeaban, Bader Alharbi, Ahmed Busaleh, Tawfik A. Saleh
Publication Date: 2023
$20.00

Acidizing process is generally performed on wells to maximize their initial productivity and on aging wells to restore productivity and maximize the recovery of the energy resources. The process involves pumping acid into a wellbore or geologic formation that is capable of producing oil and/or gas. Well acidizing is accomplished by pumping acid into the well to dissolve limestone, dolomite and calcite cement between the sediment grains of the reservoir rocks.
Picture for Bio Fuel Feedstock and Finish products – Linings Case Study
Available for download

Bio Fuel Feedstock and Finish products – Linings Case Study

Product Number: 51323-18898-SG
Author: Ravi Nagarajan, Steve Liebhart, Pedro Escudero, Shahab Soltaninia
Publication Date: 2023
$20.00

There is a sizable push for making more sustainable, renewable, and environmentally friendly fuels. One such example is the recent emphasis on manufacturing biofuels in the form of biodiesel or bio-oil. While ethanol is also considered a biofuel and likely the most widely used it will not be a focus of this discussion.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support