Search
Filters
Close

96129 PITTING GROWTH RATE IN CARBON STEEL EXPOSED TO SIMULATED RADIOACTIVE WASTE

Product Number: 51300-96129-SG
ISBN: 96129 1996 CP
Author: Philip E. Zapp
$0.00
$20.00
$20.00
Dilute high-level radioactive waste slurries can induce pitting corrosion in carbon steel tanks in which such waste is stored and processed. The waste is normally maintained with closely monitored nitrite and hydroxide concentrations known to prevent the initiation of pitting. Coupon immersion are being conducted in laboratory simulants of waste to determine the probability and growth rate of pitting in steel in the event of below-limits nitrite concentrations. Sets of about 36 carbon steel coupons have been immersed in known corrosive conditions (nitrite <5% of the established limit) at a temperature of 50°C. Three sets have been removed from testing after 64, 150, and 350 days of immersion. The long immersion times introduced variability in the exposure conditions due to the evaporation and replenishment of solution. The deepest corrosive attack was measured on each coupon by optical microscopy. The deepest pits were ranked and analyzed as a type 1 extreme value distribution to extrapolate from the coupon population to the maximum pit depths in a waste tank structure. The data were compared to a power law for pit growth, although the deepest pits did not increase monotonically with time in the limited data set. Kevwords: Localized corrosion, extreme value statistics, coupon immersion, nitrite, inhibitor
Dilute high-level radioactive waste slurries can induce pitting corrosion in carbon steel tanks in which such waste is stored and processed. The waste is normally maintained with closely monitored nitrite and hydroxide concentrations known to prevent the initiation of pitting. Coupon immersion are being conducted in laboratory simulants of waste to determine the probability and growth rate of pitting in steel in the event of below-limits nitrite concentrations. Sets of about 36 carbon steel coupons have been immersed in known corrosive conditions (nitrite <5% of the established limit) at a temperature of 50°C. Three sets have been removed from testing after 64, 150, and 350 days of immersion. The long immersion times introduced variability in the exposure conditions due to the evaporation and replenishment of solution. The deepest corrosive attack was measured on each coupon by optical microscopy. The deepest pits were ranked and analyzed as a type 1 extreme value distribution to extrapolate from the coupon population to the maximum pit depths in a waste tank structure. The data were compared to a power law for pit growth, although the deepest pits did not increase monotonically with time in the limited data set. Kevwords: Localized corrosion, extreme value statistics, coupon immersion, nitrite, inhibitor
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 00382 IMPROVEMENT ON THE SULFIDE STRESS CORROSION
Available for download

00382 IMPROVEMENT ON THE SULFIDE STRESS CORROSION CRACKING PROPERTIES OF HOT ROLLED LINE-PIPE STEELS

Product Number: 51300-00382-SG
ISBN: 00382 2000 CP
Author: Kwang-Seop Ro
$20.00
Picture for 98172 EFFECT OF NITRITE CONCENTRATION ON
Available for download

98172 EFFECT OF NITRITE CONCENTRATION ON PIT DEPTH IN CARBON STEEL EXPOSED TO SIMULATED RADIOACTIVE WASTE

Product Number: 51300-98172-SG
ISBN: 98172 1998 CP
Author: Philip E. Zapp
$20.00
Picture for 99471 ELECTROCHEMICAL STUDIES OF NITRATE-
Available for download

99471 ELECTROCHEMICAL STUDIES OF NITRATE-INDUCED PITTING IN CARBON STEEL

Product Number: 51300-99471-SG
ISBN: 99471 1999 CP
Author: Philip E. Zapp, John W. Van Zee
$20.00