Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

96058 CORROSION RESISTANCE OF WELDABLE SUPER 13CR STAINLESS STEEL IN H2S CONTAINING CO2 ENVIRONMENTS

Picture for 96058 CORROSION RESISTANCE OF WELDABLE SUPER
Available for download
Product Number: 51300-96058-SG
ISBN: 96058 1996 CP
Author: M. Ueda, H. Amaya, K. Kondo, K. Ogawa, T. Mori
$0.00
$20.00
$20.00
The weldable super 13Cr stainless steel was investigated because of the application for flow line in CO2 environments with a little amount of H2S. TIG welding in the condition of no post weld heat treatment(PWHT) was used as the welding technique. The lowering of C content less than 0.01 mass% in the weldable steel was decreased a maximum hardness in the heat-affected zone(HAZ) and mitigated the sulfide stress cracking(SSC) susceptibility. The increasing of Mo content from 2.0mass% of the super 13Cr stainless steel OCTG(0.02C-12Cr-5.5Ni-2Mo) to 2.5mass% was improved SSC resistance in the HAZ. Based on these results, the weldable super 13Cr stainless steel which consisted of 0.007C- 12Cr-6Ni-2.5Mo-Ti has been developed. The welded-joint with the yield strength of 550 MPa(80ksi) and enough corrosion resistance was completed by using the welding material of super duplex stainless steel w-hlch had 25 Cr-9Ni-3Mo-2W-0.3N. The corrosion resistance to SSC at room temperatures and localized-corrosion at elevated temperatures of the welded-joint was the same as that the super 13Cr stainless steel OCTG. The improvement effect of the corrosion resistance by means of Mo addition was discussed based on the stability of Cr oxide passive film, the analysis results of the surface film formed in the CO2 environment containing H2S, and calculated-volubility of oxides, FeCO3 and sulfides in that environment. It was clarified that Mo assisted the formation of the Cr oxide passive film in the inner layer of the surface film and the formation of MO sulfide in the outer layer. Keywords: Martensitic stainless steel, Carbon dioxide(CO2), Hydrogen sulfide((H2S), Flow line, Waldable material
The weldable super 13Cr stainless steel was investigated because of the application for flow line in CO2 environments with a little amount of H2S. TIG welding in the condition of no post weld heat treatment(PWHT) was used as the welding technique. The lowering of C content less than 0.01 mass% in the weldable steel was decreased a maximum hardness in the heat-affected zone(HAZ) and mitigated the sulfide stress cracking(SSC) susceptibility. The increasing of Mo content from 2.0mass% of the super 13Cr stainless steel OCTG(0.02C-12Cr-5.5Ni-2Mo) to 2.5mass% was improved SSC resistance in the HAZ. Based on these results, the weldable super 13Cr stainless steel which consisted of 0.007C- 12Cr-6Ni-2.5Mo-Ti has been developed. The welded-joint with the yield strength of 550 MPa(80ksi) and enough corrosion resistance was completed by using the welding material of super duplex stainless steel w-hlch had 25 Cr-9Ni-3Mo-2W-0.3N. The corrosion resistance to SSC at room temperatures and localized-corrosion at elevated temperatures of the welded-joint was the same as that the super 13Cr stainless steel OCTG. The improvement effect of the corrosion resistance by means of Mo addition was discussed based on the stability of Cr oxide passive film, the analysis results of the surface film formed in the CO2 environment containing H2S, and calculated-volubility of oxides, FeCO3 and sulfides in that environment. It was clarified that Mo assisted the formation of the Cr oxide passive film in the inner layer of the surface film and the formation of MO sulfide in the outer layer. Keywords: Martensitic stainless steel, Carbon dioxide(CO2), Hydrogen sulfide((H2S), Flow line, Waldable material
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 98113 EFFECT OF CHROMIUM AND MOLYBDENUM ON
Available for download

98113 EFFECT OF CHROMIUM AND MOLYBDENUM ON CORROSION RESISTANCE OF SUPER 13CR MARTENSITIC STAINLESS STEEL IN CO2 ENVIRONMENT

Product Number: 51300-98113-SG
ISBN: 98113 1998 CP
Author: Hisashi Amaya, Kunio Kondo, Hiroyuki Hirata, Masakatsu Ueda, Tomoki Mori
$20.00
Picture for 03097 CORROSION BEHAVIOR OF SUPER
Available for download

03097 CORROSION BEHAVIOR OF SUPER 13Cr MARTENSITIC STAINLESS STEELS IN COMPLETION FLUIDS

Product Number: 51300-03097-SG
ISBN: 03097 2003 CP
Author: Mohd Zaki Ibrahim, Neil Hudson, Kasim Selamat , Pao S. Chen , Keiichi Nakamura, Masakatsu Ueda
$20.00
Picture for 09083 Application Limits for 110ksi Strength Grade Super 13Cr Steel in CO2 Environments Containing S
Available for download

09083 Application Limits for 110ksi Strength Grade Super 13Cr Steel in CO2 Environments Containing Small Amounts of H2S

Product Number: 51300-09083-SG
ISBN: 09083 2009 CP
Author: Hideki Takabe, Perry Ian Nice, John W. Martin and Masakatsu Ueda
Publication Date: 2009
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support