Menu
Search
Filters
Close
Menu

10163 Evaluation of Protective Performance of Organic Coatings Using Current Interrupter

Picture for 10163 Evaluation of Protective Performance of Organic Coatings Using Current Interrupter
Available for download
Product Number: 51300-10163-SG
ISBN: 10163 2010 CP
Author: Hiroyuki Tanabe
Publication Date: 2010
$0.00
$20.00
$20.00
A variety of electrochemical techniques has been used for the evalutaion of protective performance of coated steel. For example, one of them is electrochemical impedance spectroscopy. (EIS) Each method has its own characteristic and is suitable to determine some kinds of anti-corrosive mechanisms of coating film. We developed a new evaluation method of protective coatings using current interrupter technique.

Generally the equivalent circuit of coated steel is simplified as a connection of the resistance of test solution. the impedance of paint film and impedance of mild steel surface in series. When the time constant of the paint film is much smaller and very different from that of the metal substrate as coated steel in general, the two equivalent circuits can be separated from each other.

Thus the polarization resistance of metal substrate was determined by separating the measured paint film impedance from the metal substrate impedance.

Electrochemical parameters can be measured by using current interrupter technique. Results of protective coating performance obtained by some experiment were discussed.

KEYWORDS: Current interrupter technique. coating. under-film corrosion tester. electrochemical method, polarization resistance, coated steel
A variety of electrochemical techniques has been used for the evalutaion of protective performance of coated steel. For example, one of them is electrochemical impedance spectroscopy. (EIS) Each method has its own characteristic and is suitable to determine some kinds of anti-corrosive mechanisms of coating film. We developed a new evaluation method of protective coatings using current interrupter technique.

Generally the equivalent circuit of coated steel is simplified as a connection of the resistance of test solution. the impedance of paint film and impedance of mild steel surface in series. When the time constant of the paint film is much smaller and very different from that of the metal substrate as coated steel in general, the two equivalent circuits can be separated from each other.

Thus the polarization resistance of metal substrate was determined by separating the measured paint film impedance from the metal substrate impedance.

Electrochemical parameters can be measured by using current interrupter technique. Results of protective coating performance obtained by some experiment were discussed.

KEYWORDS: Current interrupter technique. coating. under-film corrosion tester. electrochemical method, polarization resistance, coated steel
Product tags
Also Purchased
Picture for 10025 Remoteness of Impressed Current Anode Ground Beds
Available for download

10025 Remoteness of Impressed Current Anode Ground Beds

Product Number: 51300-10025-SG
ISBN: 10025 2010 CP
Author: R P Nagar
Publication Date: 2010
$20.00

This paper contains a review of commonly used practices and presents a generalized technique for the calculation of earth potentials for the determination of remoteness of impressed current anode ground beds. The intent is to facilitate proper design and evaluation of anode ground beds of impressed current cathodic protection system for cross-country pipelines.
Picture for SP0169-2013
Available for download

NACE SP0169-2013 (formerly RP0169), "Control of External Corrosion on Underground or Submerged Metallic Piping Systems"

Product Number: 21001-SG
Publication Date: 2013
$179.00

HISTORICAL DOCUMENT. Standard for achieving effective control of external corrosion on buried or submerged metallic piping systems or other buried metallic structures.  System design. Coatings. Cathodic protection criteria & installation.  Control of interference currents.
Picture for 11187 Effect of Oxy-firing on Fireside Corrosion
Available for download

11187 Effect of Oxy-firing on Fireside Corrosion

Product Number: 51300-11187-SG
ISBN: 11187 2011 CP
Author: Michael A. Bestor and Bruce A. Pint
Publication Date: 2011
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support