Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

10085 Corrosion Comparisons Among Magnesium Alloys of Interest for DoD Systems Using Laboratory Based Accelerated Corrosion Methods

Picture for 10085 Corrosion Comparisons Among Magnesium Alloys of Interest for DoD Systems Using Laboratory
Available for download
Product Number: 51300-10085-SG
ISBN: 10085 2010 CP
Author: Brian E. Placzankis, Chris E. Miller, Suveen N. Mathaudhu and Richard D. Delorme
Publication Date: 2010
$0.00
$20.00
$20.00
Test specimens of various magnesium alloys common to U.S. Department of Defense (DoD) systems or proposed for use in DoD systems were identically prepared and exposed under bare uncoated conditions in chamber based laboratory accelerated corrosion test methods to assess their relative susceptibilities to general and pitting corrosion attack. The methods used were ASTM B 117 neutral salt fog (NSF) and GM 9540P cyclic accelerated corrosion. The NSF specimens were compared at intervals of 18, 72, and 168 hours. The GM 9540P specimens were assessed at 1, 5, and 10 cycle intervals. The visual corrosion assessments were graphically obtained using flatbed scanning techniques. Following the exposures, final mass loss measurements were obtained for all specimens.

Keywords: Corrosion, magnesium, alloys, ZE41B, AZ31B, AZ91C, WE43B, ZK60A, K1A, salt fog, cyclic corrosion, GM 9540P
Test specimens of various magnesium alloys common to U.S. Department of Defense (DoD) systems or proposed for use in DoD systems were identically prepared and exposed under bare uncoated conditions in chamber based laboratory accelerated corrosion test methods to assess their relative susceptibilities to general and pitting corrosion attack. The methods used were ASTM B 117 neutral salt fog (NSF) and GM 9540P cyclic accelerated corrosion. The NSF specimens were compared at intervals of 18, 72, and 168 hours. The GM 9540P specimens were assessed at 1, 5, and 10 cycle intervals. The visual corrosion assessments were graphically obtained using flatbed scanning techniques. Following the exposures, final mass loss measurements were obtained for all specimens.

Keywords: Corrosion, magnesium, alloys, ZE41B, AZ31B, AZ91C, WE43B, ZK60A, K1A, salt fog, cyclic corrosion, GM 9540P
Product tags
Also Purchased
Picture for 00742 A CASE STUDY OF SOLAR MAGNESIUM ANODES USED
Available for download

00742 A CASE STUDY OF SOLAR MAGNESIUM ANODES USED IN HIGH SOIL RESITIVITY ENVIRONMENTS

Product Number: 51300-00742-SG
ISBN: 00742 2000 CP
Author: A. Petrusev, P.Eng., Kevin T. Parker
$20.00
Picture for 04044 Performance of High Potential Magnesium
Available for download

04044 Performance of High Potential Magnesium Anodes: Factors Affecting Efficiency

Product Number: 51300-04044-SG
ISBN: 04044 2004 CP
Author: Mark Yunovich, CC Technologies
Publication Date: 2004
$20.00

Magnesium anodes are provided to the corrosion control industry by a number of domestic and international manufacturers and distributors.  Anode composition is commonly the only criterion used for quality control by the end users. Many of the anodes, however, have been shown to meet the compositional and potential specifications, and yet have had measured efficiencies as low as 7%.
Picture for 06081 high-performance magnesium galvanic anodes
Available for download

06081 The development of high-performance magnesium galvanic anodes

Product Number: 51300-06081-SG
ISBN: 06081 2006 CP
Author: Hiroyuki Kobayashi, Noriyasu Mochizuki
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support