Menu
Search
Filters
Close
Menu

08570 Effect of a Corrosion Inhibitor for Oil and Gas Wells When Sand is Produced

Picture for 08570 Effect of a Corrosion Inhibitor for Oil and Gas Wells When Sand is Produced
Available for download
Product Number: 51300-08570-SG
ISBN: 08570 2008 CP
Author: K. Dave, J. Shadley, E. Rybicki, K. Roberts, S. Ramachandran, and V. Jovancicevic
Publication Date: 2008
$0.00
$20.00
$20.00
One method to control significant metal losses occurring due to corrosion in the oil and gas industry is to use corrosion inhibitors. Erosion-corrosion occurs when corrosion is accompanied by solid particle impingement. Erosion-corrosion is receiving increased attention due to the current trends in operating with sand especially in systems where flow with sand creates conditions of greater well inflow production rates than is normal for the reservoir pressure condition.1 The goal of this research is to determine the ability of an inhibitor to effectively control erosion-corrosion in an environment similar to that of wells producing CO2 and sand. A submerged direct impingement jet system with a velocity of 13 m/s was employed to examine inhibitor performance with a sand and CO2 environment for a range of sand concentrations. For all concentrations of sand tested, adding an inhibitor reduced erosion-corrosion metal loss rates compared to not using an inhibitor.
One method to control significant metal losses occurring due to corrosion in the oil and gas industry is to use corrosion inhibitors. Erosion-corrosion occurs when corrosion is accompanied by solid particle impingement. Erosion-corrosion is receiving increased attention due to the current trends in operating with sand especially in systems where flow with sand creates conditions of greater well inflow production rates than is normal for the reservoir pressure condition.1 The goal of this research is to determine the ability of an inhibitor to effectively control erosion-corrosion in an environment similar to that of wells producing CO2 and sand. A submerged direct impingement jet system with a velocity of 13 m/s was employed to examine inhibitor performance with a sand and CO2 environment for a range of sand concentrations. For all concentrations of sand tested, adding an inhibitor reduced erosion-corrosion metal loss rates compared to not using an inhibitor.
Product tags
Also Purchased
Picture for 08632 CO2 Corrosion Inhibitor Performance in the Presence of Solids: Test Method Development
Available for download

08632 CO2 Corrosion Inhibitor Performance in the Presence of Solids: Test Method Development

Product Number: 51300-08632-SG
ISBN: 08632 2008 CP
Author: Anette Pedersen, Katerina Bilkova, Egil Gulbrandsen, and Jon Kvarekval
Publication Date: 2008
$20.00
Picture for 09474 Effect of Sand Production and Flow Velocity on Corrosion Inhibition Under Scale Forming Condit
Available for download

09474 Effect of Sand Production and Flow Velocity on Corrosion Inhibition Under Scale Forming Conditions

Product Number: 51300-09474-SG
ISBN: 09474 2009 CP
Author: John R. Shadley, Edmund F. Rybicki, Kavitha Tummala, Kenneth P. Roberts and Siamack Shirazi
Publication Date: 2009
$20.00
Picture for 96015 VELOCITY GUIDELINES FOR PREVENTING
Available for download

96015 VELOCITY GUIDELINES FOR PREVENTING PITTING OF CARBON STEEL PIPING WHEN THE FLOWING MEDIUM CONTAINS CO2 AND SAND

Product Number: 51300-96015-SG
ISBN: 96015 1996 CP
Author: J.R. Shadley, S.A. Shirazi, E. Dayalan, E.F. Rybicki
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support