Menu
Search
Filters
Close
Menu

06053 MULTI-LAYER PIPELINE COATING SYSTEMS: A NEW LOOK AT THE EVALUATION OF CERTAIN QC TESTS AND CRITICAL APPLICATION PARAMETERS FOR FBE PRIMERS

Picture for 06053 MULTI-LAYER PIPELINE COATING SYSTEMS
Available for download

 This paper begins with a brief discussion of essential properties of all pipeline coatings, and a listing of multi-layer systems designed to meet specific needs. It then focuses on special considerations regarding application parameters for multi-layer systems that use fusionbonded epoxy as the primer.

Product Number: 51300-06053-SG
ISBN: 06053 2006 CP
Author: Paul Partridge
Publication Date: 2006
Industries: Pipelines, Tanks, and Underground Systems , Coatings and Linings
$0.00
$20.00
$20.00

Advancing technologies for pipeline construction techniques and increasingly severe operating parameters present challenges for pipeline coatings. Multi-layer coatings have evolved to increase the mechanical toughness of the system, to provide corrosion protection at elevated temperatures, to provide specific surface textures, to provide a foundation for insulation systems, and to accept the rigors of specific construction techniques. Qualification test methods must give assurance that the basic system has the ability to survive the operating conditions after construction. Quality control (QC) testing must provide assurance that acceptable performance is consistently achieved throughout the course of mill and field application activities. Proper selection of test methods and proper interpretation of test results are essential components of comprehensive pipe coating and construction projects. This paper begins with a brief discussion of essential properties of all pipeline coatings, and a listing of multi-layer systems designed to meet specific needs. It then focuses on special considerations regarding application parameters for multi-layer systems that use fusionbonded epoxy as the primer. These parameters determine long-term performance. A new interpretation of the simple water soak test can be a valuable tool in quality control testing. Keywords: fusion-bonded epoxy, polyethylene, polypropylene, centrifugal blast, disbondment, insulation

 

Advancing technologies for pipeline construction techniques and increasingly severe operating parameters present challenges for pipeline coatings. Multi-layer coatings have evolved to increase the mechanical toughness of the system, to provide corrosion protection at elevated temperatures, to provide specific surface textures, to provide a foundation for insulation systems, and to accept the rigors of specific construction techniques. Qualification test methods must give assurance that the basic system has the ability to survive the operating conditions after construction. Quality control (QC) testing must provide assurance that acceptable performance is consistently achieved throughout the course of mill and field application activities. Proper selection of test methods and proper interpretation of test results are essential components of comprehensive pipe coating and construction projects. This paper begins with a brief discussion of essential properties of all pipeline coatings, and a listing of multi-layer systems designed to meet specific needs. It then focuses on special considerations regarding application parameters for multi-layer systems that use fusionbonded epoxy as the primer. These parameters determine long-term performance. A new interpretation of the simple water soak test can be a valuable tool in quality control testing. Keywords: fusion-bonded epoxy, polyethylene, polypropylene, centrifugal blast, disbondment, insulation

 

PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 06057 Hidden Problems with Three Layer
Available for download

06057 Hidden Problems with Three Layer Polypropylene Pipeline Coatings

Product Number: 51300-06057-SG
ISBN: 06057 2006 CP
Author: Ali N Moosavi, Salim Al-Mutawa, Salah Balboul and Mostafa Saady
Publication Date: 2006
$20.00

Two large scale problems with three layer polyolefin (3LPO) coatings are discussed here and possible reasons for the failures. Lessons learned and recommendations for future usage of such coatings are provided. 
Picture for 07006 INORGANIC ZINC PRIMER VS ORGANIC ZINC PRIMER: (an end-user point of view ).
Available for download

07006 INORGANIC ZINC PRIMER VS ORGANIC ZINC PRIMER: (an end-user point of view ).

Product Number: 51300-07006-SG
ISBN: 07006 2007 CP
Author: Massimo Cornago
Publication Date: 2007
$20.00

 In this paper the approach of an Oil Company is demonstrated from the initial choice between different primers: inorganic zinc and organic (epoxy) zinc., to all the preliminary pre-qualification tests, the subsequently field test performed, and the procedures adopted, costs included.
Picture for 05031 Testing and Selection of Girth Weld
Available for download

05031 Testing and Selection of Girth Weld Protective Coatings

Product Number: 51300-05031-SG
ISBN: 05031 2005 CP
Author: Amal Al-Borno and Mick D. Brown, Charter Coating Service
Publication Date: 2005
$20.00

This paper describes the relevant characteristics of available joint coating types and examines different testing protocols to explore these characteristics. The objective is to assist in the selection of appropriate, practical, cost effective girth weld protective coatings. that will provide good long-term corrosion protection.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support