Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

01019 INFLUENCE OF CATHODIC PROTECTION ON HYDROGEN ENBRITTLEMENT ON ANNEALED AND COLD WORKED DUPLEX STAINLESS STEELS

Picture for 01019 INFLUENCE OF CATHODIC PROTECTION ON
Available for download
Product Number: 51300-01019-SG
ISBN: 01019 2001 CP
Author: U.H. Kivisakk and M. Holmquist
$0.00
$20.00
$20.00
The resistance to hydrogen embrittlement has been investigated for two of the most common duplex stainless steels, UNS S31803 and UNS S32750. The test environment was set up to simulate the influence of cathodic protection in seawater with the test solution as synthetic seawater at 80°C. As a substitute for cathodic protection, zinc was coupled to samples. In addition, the samples were electrochemically pre-charged with hydrogen. Both annealed and 20% cold worked material were tested using a constant load test at 90% of tensile strength. Cold worked material was also tested with the slow strain rate technique. This investigation indicates that there is a very low risk of hydrogen embrittlement for these duplex steels in seawater when cathodically protected with a potential corresponding to Zn. However, for cold worked UNS S32750, plastic straining during service may cause hydrogen embrittlement. The test indicates that the risk is lower for UNS S31803. Keyword: hydrogen embrittlement, duplex stainless steels, cathodic protection, cold work
The resistance to hydrogen embrittlement has been investigated for two of the most common duplex stainless steels, UNS S31803 and UNS S32750. The test environment was set up to simulate the influence of cathodic protection in seawater with the test solution as synthetic seawater at 80°C. As a substitute for cathodic protection, zinc was coupled to samples. In addition, the samples were electrochemically pre-charged with hydrogen. Both annealed and 20% cold worked material were tested using a constant load test at 90% of tensile strength. Cold worked material was also tested with the slow strain rate technique. This investigation indicates that there is a very low risk of hydrogen embrittlement for these duplex steels in seawater when cathodically protected with a potential corresponding to Zn. However, for cold worked UNS S32750, plastic straining during service may cause hydrogen embrittlement. The test indicates that the risk is lower for UNS S31803. Keyword: hydrogen embrittlement, duplex stainless steels, cathodic protection, cold work
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 01091 RISK OF HYDROGEN EMBRITTLEMENT FROM CATHODIC
Available for download

01091 RISK OF HYDROGEN EMBRITTLEMENT FROM CATHODIC PROTECTION ON SUPERMARTENSITIC STAINLESS STEELS

Product Number: 51300-01091-SG
ISBN: 01091 2001 CP
Author: Stein Olsen, Linda Borvik, Gisle Rorvik, Egil Aune
$20.00
Picture for Cathodic Protection of Stainless Steels and Corrosion Resistant Alloys (CRA's)
Available for download

51312-01401-Cathodic Protection of Stainless Steels and Corrosion Resistant Alloys (CRA's)

Product Number: 51312-01401-SG
ISBN: 01401 2012 CP
Author: Jan J.M. Heselmans
Publication Date: 2012
$20.00
Picture for 01011 CATHODIC PROTECTION OF STEEL IN DEEP
Available for download

01011 CATHODIC PROTECTION OF STEEL IN DEEP SEA : HYDROGEN EMBRITTLEMENT RISK AND CATHODIC PROTECTION CRITERIA

Product Number: 51300-01011-SG
ISBN: 01011 2001 CP
Author: Dominique Festy
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support