Menu
Search
Filters
Close
Menu

00178 A PROCESS FOR LINING OILFIELD PIPELINES

Picture for 00178 A PROCESS FOR LINING OILFIELD PIPELINES
Available for download
Product Number: 51300-00178-SG
ISBN: 00178 2000 CP
Author: Kevin Cato
Industry: Pipelines, Tanks, and Underground Systems
$0.00
$20.00
$20.00
Internal corrosion has long been of major concern to pipeline owners, having spent millions of dollars and countless man-hours combating its destructive effects. Pipeline failures, due to internal corrosion, have produced environmental and legal issues that have resulted in huge fines and judgements, creating even greater concerns about its ambiguous nature. Over the years, a number of technologies have been introduced to deal with the variety of corrosion problems that exist in oilfield pipelines. One such option is a 50 year old technology known as in-situ coating. The in-situ coating process is a relatively simple procedure, whereas, the internal pipe wall is thoroughly cleaned, either by means of abrasive blasting or by a system that combines progressive pigging and chemical cleaning. This is then followed by the application of several coats of a suitable protective coating. The most common coating used is typically a high performance epoxy. The process is unique, whereas, pipeline pigs, instead of conventional spray equipment apply the coating. The objective of this paper is to address the overall process of in-situ coating, which includes; cleaning options and effectiveness, coating selection and application, its limitations and residual benefits and the pipeline owners or operators involvement.
Internal corrosion has long been of major concern to pipeline owners, having spent millions of dollars and countless man-hours combating its destructive effects. Pipeline failures, due to internal corrosion, have produced environmental and legal issues that have resulted in huge fines and judgements, creating even greater concerns about its ambiguous nature. Over the years, a number of technologies have been introduced to deal with the variety of corrosion problems that exist in oilfield pipelines. One such option is a 50 year old technology known as in-situ coating. The in-situ coating process is a relatively simple procedure, whereas, the internal pipe wall is thoroughly cleaned, either by means of abrasive blasting or by a system that combines progressive pigging and chemical cleaning. This is then followed by the application of several coats of a suitable protective coating. The most common coating used is typically a high performance epoxy. The process is unique, whereas, pipeline pigs, instead of conventional spray equipment apply the coating. The objective of this paper is to address the overall process of in-situ coating, which includes; cleaning options and effectiveness, coating selection and application, its limitations and residual benefits and the pipeline owners or operators involvement.
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 00092 RAPID UNDERGROUND CORROSION MEASUREMENTS
Available for download

00092 RAPID UNDERGROUND CORROSION MEASUREMENTS FOR BURIED PIPELINES

Product Number: 51300-00092-SG
ISBN: 00092 2000 CP
Author: Philippe Kempe, Allen Denzine, and Eugen Tiefiaig
$20.00
Picture for 00005 PROTECTIVE PROPERTIES OF CRUDE OILS
Available for download

00005 PROTECTIVE PROPERTIES OF CRUDE OILS IN CO2 AND H2S CORROSION

Product Number: 51300-00005-SG
ISBN: 00005 2000 CP
Author: Marta Castillo, Hern~in Rincon, Simona Duplat, Jose Vera, Evaristo Baron
$20.00
Picture for 00012 Aggressive CO2 Corrosion and Fatigue
Available for download

00012 Aggressive CO2 Corrosion and Fatigue Behavior of Pipeline Girth Welds

Product Number: 51300-00012-SG
ISBN: 00012 2000 CP
Author: K. E. Szklarz
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support