Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

"Mold And Mildew Investigation and Testing of Navy Interior Coatings"

Picture for "Mold And Mildew Investigation and Testing of Navy Interior Coatings"
Available for download

Mold and mildew growth within Navy ships is a significant issue across the fleet. To investigate this issue the Environmental Security Technology Certification Program (ESTCP) and the Strategic Environmental
Research and Development Program (SERDP) funded an investigation into the prevalence of mold in the fleet, with the end goal of developing solutions to remediate and prevent future mold growth. Thus
far, mold and coating data was collected from 26 ships across 6 geographic locations. These mold samples have been analyzed to determine the most common species and highlight those that are toxigenic. 

Product Number: 51323-18804-SG
Author: Patrick Cassidy, Jason Lee, Charles White, Michael Kibler
Publication Date: 2023
$0.00
$20.00
$20.00

Mold and mildew within Navy ships is a significant issue across the fleet. In 2021 a program was initiated to characterize the extent of the issues and develop mold remediation and preventative processes and technologies. This paper will review the findings of ship inspections performed to determine the extent of mold issues across the Navy and present data on the development and testing of Navy interior coatings with fungistatic additives. In this effort, 26 ships were inspected and sampled across 6 naval bases. The ship inspections determined the most common ship spaces for mold growth, recorded environmental contributors to growth, and non-destructively tested coating characteristics of mold affected ship areas. Additionally, mold samples were taken for laboratory DNA analysis. The findings of the DNA analysis will be presented including common mold genera and species, differences between geographic locations,
and the presence of molds that can be considered respiratory hazards. Using this data, the team is working alongside industry partners to develop fungistatic additives for common Navy interior coatings. Fungal inhibition testing of the new coating is ongoing with additional testing to be performed in the future. Additionally, ship demonstrations of the new technology are planned for completion in 2023.

Mold and mildew within Navy ships is a significant issue across the fleet. In 2021 a program was initiated to characterize the extent of the issues and develop mold remediation and preventative processes and technologies. This paper will review the findings of ship inspections performed to determine the extent of mold issues across the Navy and present data on the development and testing of Navy interior coatings with fungistatic additives. In this effort, 26 ships were inspected and sampled across 6 naval bases. The ship inspections determined the most common ship spaces for mold growth, recorded environmental contributors to growth, and non-destructively tested coating characteristics of mold affected ship areas. Additionally, mold samples were taken for laboratory DNA analysis. The findings of the DNA analysis will be presented including common mold genera and species, differences between geographic locations,
and the presence of molds that can be considered respiratory hazards. Using this data, the team is working alongside industry partners to develop fungistatic additives for common Navy interior coatings. Fungal inhibition testing of the new coating is ongoing with additional testing to be performed in the future. Additionally, ship demonstrations of the new technology are planned for completion in 2023.

Product tags
Also Purchased
00615 INSPECTION AND INTERPRETATION USING JOINT STANDARD NACE NO. 5/SSPC SP-12
Available for download

00615 INSPECTION AND INTERPRETATION USING JOINT STANDARD NACE NO. 5/SSPC SP-12

Product Number: 51300-00615-SG
ISBN: 00615 2000 CP
Author: R.P. Negrey
$25.00

Conference Paper - This paper describes the requirements of the standard, additional inspection points, and several uses of the standard in the field where clear specification language was imperative to successful project completion. NACE 5/SSPC-SP 12 standard confined to water jetting - which makes use of ultra-high pressure water that is nonabrasive.  Four levels of visible post-cleaning condition and three levels of non-visible condition are defined.
Picture for Coatings + Proceedings 2021-ALL Papers
Available for download

(Coating Application,Types & Characteristics) New SSPC Paint 47 Fluoropolymer Topcoat Standard for

Product Number: 13-COAT_DEC21
Author: Dr. Kurt Wood
Publication Date: 2021
$20.00

Since the 1980s, fluoropolymer resin technologies have offered the possibility of a quantum improvement in topcoat decorative properties- gloss and color retention- compared to conventional acrylic and polyester resins. Specifiers of both protective and architectural restoration coatings systems have expressed a need for a new SSPC standard for field-applied fluoropolymer topcoats, particularly for bright and saturated colors.
Picture for Coatings + Proceedings 2021-ALL Papers

(Coating Application, Types & Characteristics) Use of Duplex Coating Systems for Protection of Structural Steel

Product Number: 15-COAT_DEC21
Author: William D. Corbett
Publication Date: 2021
$20.00

The use of duplex coating systems (hot dip galvanizing or thermal spray coating with one or more liquid-applied coatings) for long term protection of structural steel is becoming more mainstream in many industries. This paper describes the advantages of employing duplex coating systems as well as some important considerations for designers prior to specifying their use. It also highlights an ongoing initiative to help agencies more efficiently and effectively use duplex coatings on steel bridges by developing guidelines, standards, and other materials.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support