AMPP Store - Water/Wastewater

Available for download

99367 An Application for Treating Semiconductor Manufacturing Industrial Waste Water to EPA Drinking Water Standards

Product Number: 51300-99367-SG

ISBN: 99367 1999 CP

Author: A. Sandoval

$20.00

Available for download

99369 San Antonio Water System’s Recycled Water Program: Plans/Progress/Case Histories

Product Number: 51300-99369-SG

ISBN: 99369 1999 CP

Author: Ken Diehl, Paul R. Puckorius

$20.00

Available for download

99374 WATER CONSERVATION & REUSE AT A MAJOR CPI FACILITY

Product Number: 51300-99374-SG

ISBN: 99374 1999 CP

Author: Russell F. Dunn and Alec M. Dobson

$20.00

Available for download

A Phosphorous-Free Alternative for Corrosion Control

Product Number: 51317--9193-SG

ISBN: 9193 2017 CP

Author: Eric Ward

Publication Date: 2017

$20.00

This paper will present corrosion inhibitor performance data using electrochemical test methods, additional laboratory testing and pilot test results to demonstrate this new inhibitor’s performance benefits, overall effectiveness and value to the water treatment market.

Available for download

A Practical Approach to the Rehabilitation of a Wastewater Treatment Facility: Utilizing Case Histories to Demonstrate “Real-Life” Applications

Product Number: 41212-664-SG

Author: Gary R. Hall, Lake H. Barrett Jr., Pete J. Jansen

Publication Date: 2012

$20.00

Wastewater collection and treatment systems face a more serious corrosion problem today than in the past. There are several reasons for this, including odor control, reduced I&I, chemical composition of sewage, an increase in the retention time, and concrete that is not of the same quality as it was only 30 years ago.

Available for download

Accelerating Construction in Sewer Collection: Madison CMIC Pump Station #1 A Case Study

Product Number: 51219-226-SG

Author: Eric Zimmerman, Jennifer Sloan-Ziegler

Publication Date: 2019

$20.00

The County of Madison, MS. experienced severe degradation of a major pump station in their system that was less than 10 years old. They contracted with Waggoner Engineering of Jackson, MS. to design a rehabilitation system as well as increase the structural integrity with the addition of some support walls. The project created scheduling issues due to the addition of new concrete structures to the pump station. The use of innovative coatings technologies that offered the ability to apply corrosion resistant linings over green concrete structures, dramatically enhanced the project schedule and reduced overall costs.

Available for download

All Fouled Up’ - An Innovative Solution

Product Number: 41215-914-SG

Author: Kevin Morris

Publication Date: 2015

$20.00

Within the Wastewater Treatment process the growth of soft fouling materials (algae) create problems such as Total Suspended Solids issues, false BOD readings, clogged pumps, and reduced flow rates through the weirs of clarifiers. Furthermore, dead or dying algae can cause additional odor concerns. This phenomenon has cost municipalities and taxpayer’s untold amounts of money due to the required maintenance dollars spent to correct this problem.

Available for download

AMPP Guide 21555-2024, Water Analysis for Corrosion Prediction - Sampling Analysis and Interpretation

Product Number: AMPP Guide 21555-2024

Publication Date: 2024

$109.00

This Guide focuses on those water chemistry parameters that are key for corrosion prediction. Additional parameters may be required for other materials and corrosion evaluations and decisions. This Guide does not provide a procedure for how, when, and where to take water samples or how to preserve samples.

Available for download

AMPP SP21513-2021, Procedure for Determining Conformance to Concrete Surface Profile Requirements

Product Number: AMPP SP21513-2021

Publication Date: 2021

$109.00

This standard describes a procedure suitable for laboratory and field use to determine conformance to specified surface profile on concrete substrates using Method 1: Depth micrometer as described in ASTM D8271, Method 2: Concrete Surface Profile (CSP) Chips (CSP 1-10) as described in ICRI Guideline No. 310.2R, or Method 3: Replica putty as described in ASTM D7682 (Method 3A-visual or Method 3B-quantitative).

Proper bonding of coatings and linings to concrete surfaces requires proper cleaning and frequently requires the concrete to be roughened to increase the surface area. The roughness, also known as surface profile, can be imparted into concrete by abrasive or water blast cleaning, acid etching or various impact/scarifying power tools. The resulting surface profile depth can influence coating/lining adhesion and performance. Coating/lining manufacturers and/or facility owners frequently specify cleaning and roughening of the concrete surface prior to product installation.

Available for download

AMPP SP21518-2022, Recovery and Repassivation after Low pH Excursions in Open Recirculating Cooling Water Systems

Product Number: AMPP SP21518-2022

Publication Date: 2022

$109.00

This standard practice presents guidelines for preplanning for, recovering from, and repassivation after a low pH excursion in open recirculating water systems, no matter what the cause. The procedures presented in this standard inno way preclude the use of other procedures but are presented as best practices developed over years of experienceinavarietyofplants.Theprovisionsofthisstandardshouldbeappliedunderthedirectionofqualifiedwater-treatmentpersonnelfromwater-treatmentsuppliersand/orconsultants andplantpersonnel.

Available for download

AMPP SP21520-2023, Acceptance Criteria for Cathodic Protection of Steel in Concrete Structures

Product Number: AMPP SP21520-2023

Publication Date: 2023

$109.00

Historically, NACE SP0290, NACE SP0216, and NACE SP0408 included sets of criteria that needed to be satisfied to indicate that a cathodic protection (CP) system is delivering adequate current to passivate the reinforcing steel or reduce its corrosion current to low and non-destructive levels. These criteria were mostly the same, so the aim of this standard is to set out the essential criteria that each one of the above standards must satisfy in a single document. This allows each of the above standards, which deal with different applications of cathodic protection, to concentrate and expand on aspects that are specific for each application. This standard further suggests techniques that can be employed to estimate the level of protection achieved by a non-compliant cathodic protection method.

Available for download

AMPP SP21548-2022, Pressurized Water Cleaning of Concrete and Cememtitious Materials - Thorough Cleaning

Product Number: AMPP SP21548-2022

Publication Date: 2022

$109.00

This standard is intended for use by coating or lining specifiers, applicators, inspectors, or others who require the use of pressurized water cleaning technology to achieve a defined level of visual cleanliness of concrete surfaces. This standard contains requirements for Thorough Cleaning. Requirements for Light Cleaning are addressed in a separate standard.

Water/Wastewater

Association for Materials Protection and Performance