Carbon capture utilization and storage (CCUS) are technologies aimed at capturing CO2 and preventing its subsequent emission. Though CO2 transport and injection for enhanced oil recovery (EOR) has been a common practice for the Oil and Gas industry for over 40 years, new challenges arise when the CO2 source is anthropogenic. Industrial CO2 stream composition will carry impurities such as NO2 (nitrogen oxides), SO2 (sulfur oxides), O2 (oxygen), H2S (hydrogen sulfide) that could affect material corrosion behavior. A complete testing program was undertaken to assess the main corrosion risks associated to the application: Sulfide Stress Cracking (SSC), Stress Corrosion Cracking (SCC), crevice and mass loss resistance. The results confirm the effects of impurities such as SO2, NO2 and oxygen on corrosion behavior. Carbon low alloyed steel (N80Q) material presented a higher corrosion rate, and it is not suitable for injection tubing but may be acceptable for casing materials when not permanently exposed to the CO2 stream. UNS S41426 (S13Cr) material needs special considerations for CCS application due the presence of some localized corrosion when exposed to a high saline water phase. UNS S31803 (22Cr) could be suitable for a less severe environment including additional testing, whilst UNS S32760 (25CrS) presented good corrosion behavior and is suitable for the application.