AMPP Store - Products tagged with 'slow strain rate test'

Available for download

09348 Prevention of External Chloride Stress Corrosion Cracking of Austenitic Stainless Steel with a

Product Number: 51300-09348-SG

ISBN: 09348 2009 CP

Author: Johan F.M. Van Roij and Jan G. De Jong

Publication Date: 2009

$20.00

Electrochemical and slow strain rate tests were done to demonstrate the protective ability of a thermal sprayed aluminum coating to prevent chloride stress corrosion cracking of TP304L SS in aqueous chloride solutions. Mitigation methods.

Available for download

51317--9715-Problems Related to the Slow Strain Rate Test Performance and the Specimen Characterization in Austenitic Corrosion Resistant Alloy Tubes

Product Number: 51317--9715-SG

ISBN: 9715 2017 CP

Author: Pilar Esteban

Publication Date: 2017

$20.00

The specimen surface, effect of filling rate were examined. Characterization of the primary fracture surface and the gauge section of the tested specimens was done by scanning electron microscopy and subsequent classification according to the NACE TM0198 standard.

Available for download

51318-10495-Nanostructured Steel Susceptibility to Sulfide Stress Cracking

Product Number: 51318-10495-SG

Author: Raymundo Case / Arash Shadravan / Argie Rumann

Publication Date: 2018

$20.00

The susceptibility of a high strength low alloy nanostructured steel to sulfide stress corrosion cracking (SSCC) resistance is assessed.

Available for download

51318-10921-Titanium Alloy Stress Corrosion Resistance to Methanol Vapor in Hydrocarbon Gas Export Systems

Product Number: 51318-10921-SG

Author: Ronald W. Schutz / Birendra Jena / Ramgopal Thodla / Heath W. Walker

Publication Date: 2018

$20.00

Susceptibility of Grades 23 and 29 titanium Tapered Stress Joint (TSJ) forgings to gas phase methanolic Stress Corrosion Cracking (SCC) was measured in deaerated, dry 0-0.5 wt.% and saturated methanol-containing methane gas environments at 25C in a two phase laboratory program.

Available for download

51318-11112- Effect of Slow Strain Rate on Stress Corrosion Cracking of CrNiMoV weld joint in sodium chloride solution at 180 ℃

Product Number: 51318-11112-SG

Author: Yuhui Huang / Linghua Luo / Yuqing Ouyang / Fu-zhen Xuan

Publication Date: 2018

$20.00

The stress corrosion cracking (SCC) susceptibility of 30Cr2Ni4MoV rotor steel welded joint in a 3.5 wt.% NaCl solution at 180 °C was investigated using slow strain rate tensile (SSRT) tests at different strain rates.

Available for download

A Study on Tensile Characteristics (SSRT) of Pipeline Material (API 5L X52) Under High Pressure Hydrogen Environment

Product Number: 51323-19228-SG

Author: Won Jung Kim, Hyung Goun Joo, Chang Nam You, Hyeong Sub Kim

Publication Date: 2023

$20.00

Recently, Countries around the world are taking steps to reduce carbon, which is considered a major cause of environmental pollution and the hydrogen market, an eco-friendly energy, is growing rapidly. Major countries such as the United States, Japan and the European Union (EU) are strengthening policies for the use of hydrogen energy and hydrogen-related projects in various fields, from materials to chemistry, energy and mobility, are being actively carried out. In order to use hydrogen energy, it is the most efficient and currently the most reasonable method to transport the produced hydrogen as high-pressure gas through a pipeline.

Available for download

Alloy A975 Resistant To Severe Sour Environments And To Hydrogen Embrittlement

Product Number: 51321-16814-SG

Author: Ernst Plesiutschnig; Rainer Fluch; Martin Wöls; Marianne Kapp; Greg Chitwood

Publication Date: 2021

$20.00

Available for download

Comparison of stress corrosion cracking behavior of Fe13Cr5Ni- and Fe17Cr5.5Ni- based high chromium stainless steels in HPHT CO2 environments

Product Number: 51320-14695-SG

Author: Yameng Qi, Chunxia Zhang, Zhonghua Zhang

Publication Date: 2020

$20.00

The stress corrosion cracking (SCC) behavior of Fe13Cr5Ni- and Fe17Cr5.5Ni-based alloys in HTHP CO2 environments was investigated through slow strain rate tests (SSRT) and electrochemical methods. The results show that a remarkable decrease in tensile strength and elongation to failure was observed when testing in CO2 environment as compared with air. Fe17Cr5.5Ni-based alloys possessed better SCC resistance than Fe13Cr5Ni-based alloys. The increase of Cr and Ni content tended to enhance the resistance to SCC and pitting corrosion. The SCC behaviors of Fe13Cr5Ni- and Fe17Cr5.5Ni-based alloys were closely associated with the repassivation capacity and the resistance to pitting corrosion.

Available for download

Developing Additively Manufactured Alloy UNS N07718 for Critical Oilfield Applications

Product Number: 51323-19220-SG

Author: Wei Chen, Thomas Dobrowolski, Paul Agosta, Nicholas Barta, Lakshmi Vendra, Juan Carlos Flores

Publication Date: 2023

$20.00

Additively Manufactured Alloy UNS N07718 (AM 718) has been increasingly adopted for components in oilfield applications. AM 718 fabricated using laser powder bed fusion (LPBF) has demonstrated not only excellent mechanical performance, but also promising capabilities in critical services such as sour or hydrogen-generating conditions. In oilfield applications, it is generally felt that AM 718 should comply with API standard 20S4, and align with the requirements for wrought 718 in API 6ACRA.

Available for download

Effect of Chloride on the SCC Behavior of Carbon Steel Welds Exposed to Concrete Pore Water under Anoxic Conditions

Product Number: 51323-19029-SG

Author: B. Kursten, R. Gaggiano

Publication Date: 2023

$20.00

In all nuclear power generating countries, high-activity, long-lived radioactive waste is an unavoidable by-product of the contribution of this energy to the global electricity generation. Disposal in deep, stable geological formations is, at present, the most promising option accepted at an international level for the long-term management of these wastes. Geological disposal relies on a combination of engineered (man-made) barriers and a natural barrier (the host rock), in order to prevent radionuclides and other contaminants ever reaching concentrations outside the container at which they could present an unacceptable risk for people and the environment.

Available for download

Influence of the Hardening Phases on the Hydrogen Embrittlement Susceptibility of Ni-Alloys based on UNS N07718

Product Number: 51320-14667-SG

Author: Julia Botinha, Bodo Gehrmann, Helena Alves

Publication Date: 2020

$20.00

The Alloy UNS(1) N07718 is among the most used alloys in the oil and gas industry. Due to the presence of the alloying elements niobium, aluminum and titanium, this alloy is precipitation hardenable by the formation of the phases Gamma’ and Gamma’’. Although presenting excellent strength properties and good resistance in sour gas applications, this material is known to be susceptible to hydrogen embrittlement and most field failures are related to this limiting property.

The use of Alloy 718 (UNS N07718) for oil & gas applications is regulated by the API(2) 6ACRA1 standard and it is available in three different grades, the 120K, with minimum 120 ksi yield strength, the 140K, with minimum 140 ksi yield strength, and the 150K, with minimum 150 ksi yield strength. Previous studies showed that, due to the different hardening heat treatment parameters, each of the available grades presents a different precipitation behavior in terms of distribution and amount of precipitates, and the obtained microstructure is directly related to the resistance of the material to hydrogen embrittlement.

Available for download

Influence Of The Surface Condition On The Pitting And SCC Resistance Of Alloy UNS N07718 Produced Via Selective Laser Melting

Product Number: 51321-16949-SG

Author: Madison Woolridge; Christoph Wangenheim; Helmuth Sarmiento Klapper

Publication Date: 2021

$20.00

Products tagged with 'slow strain rate test'

Association for Materials Protection and Performance