Menu
Search
Filters
Close
Menu

Products tagged with 'waterjet cleaning'

View as
Sort by
Display per page
00615 INSPECTION AND INTERPRETATION USING JOINT STANDARD NACE NO. 5/SSPC SP-12
Available for download

00615 INSPECTION AND INTERPRETATION USING JOINT STANDARD NACE NO. 5/SSPC SP-12

Product Number: 51300-00615-SG
ISBN: 00615 2000 CP
Author: R.P. Negrey
$25.00

Conference Paper - This paper describes the requirements of the standard, additional inspection points, and several uses of the standard in the field where clear specification language was imperative to successful project completion. NACE 5/SSPC-SP 12 standard confined to water jetting - which makes use of ultra-high pressure water that is nonabrasive.  Four levels of visible post-cleaning condition and three levels of non-visible condition are defined.
Picture for NACE WJ-1/SSPC-SP WJ-1
Available for download

NACE WJ-1/SSPC-SP WJ-1-2012 (Editorial Corrections 1/5/2017), Waterjet Cleaning of Metals—Clean to Bare Substrate (WJ-1)

Product Number: 21158-SG
$179.00

HISTORICAL DOCUMENT. Defines the Very Thorough Cleaning (WJ-1) degree of surface cleanliness - one of four levels (WJ- 1,2,3,4) achieved by the use of waterjet cleaning. 
Picture for NACE WJ-1/SSPC-SP WJ-1 CN
Available for download

NACE WJ-1/SSPC-SP WJ-1-2012-SG (Chinese), “Waterjet Cleaning of Metals—Clean to Bare Substrate (WJ-1)” Chinese Translation

Product Number: 21191-SG
ISBN: 1-57590-248-6
$179.00

Defines the Clean to Bare Substrate (WJ-1) degree of surface cleanliness of coated or uncoated metallic substrates achieved by the use of waterjet cleaning. Other degrees listed in overview below.
Picture for NACE WJ-2/SSPC-SP WJ-2
Available for download

NACE WJ-2/SSPC-SP WJ-2-2012 (Editorial Corrections 1/5/2017), Waterjet Cleaning of Metals—Very Thorough Cleaning (WJ-2)

Product Number: 21155-SG
$179.00

HISTORICAL DOCUMENT. Defines the Very Thorough Cleaning (WJ-2) degree of surface cleanliness - one of four levels (WJ- 1,2,3,4) achieved by the use of waterjet cleaning.  
Picture for NACE WJ-2/SSPC-SP WJ-2 CN
Available for download

NACE WJ-2/SSPC-SP WJ-2-2012-SG (Chinese), “Waterjet Cleaning of Metals—Very Thorough Cleaning (WJ-2)" Chinese Translation

Product Number: 21192-SG
ISBN: 1-57590-249-4
$179.00
Picture for NACE WJ-3/SSPC-SP WJ-3
Available for download

NACE WJ-3/SSPC-SP WJ-3-2012 (Editorial Corrections 1/5/2017), Waterjet Cleaning of Metals—Thorough Cleaning (WJ-3)

Product Number: 21156-SG
$179.00

HISTORICAL DOCUMENT. Defines the Thorough Cleaning (WJ-3) degree of surface cleanliness - one of four levels (WJ- 1,2,3,4) achieved by the use of waterjet cleaning. 
Picture for NACE WJ-3/SSPC-SP WJ-3 CN
Available for download

NACE WJ-3/SSPC-SP WJ-3-2012-SG (Chinese), “Waterjet Cleaning of Metals—Thorough Cleaning (WJ-3)” Chinese Translation

Product Number: 21193-SG
ISBN: 1-57590-250-8
$179.00

Defines Thorough Cleaning (WJ-3) degree of surface cleanliness of  metallic substrates by use of waterjet cleaning.  One of four (Clean to Bare Substrate, Very Thorough, Thorough, Light).
Picture for NACE WJ-4/SSPC-SP WJ-4
Available for download

NACE WJ-4/SSPC-WJ-4-2012 (Editorial Corrections 1/5/2017), Waterjet Cleaning of Metals—Light Cleaning (WJ-4)

Product Number: 21157-SG
ISBN: 1-57590-251-6
$179.00

HISTORICAL DOCUMENT. Defines the Light Cleaning (WJ-4) degree of surface cleanliness - one of four levels (WJ- 1,2,3,4) achieved by the use of waterjet cleaning.  
Standards and Best Practice for Surface Preparation of Steel Substrates

Standards and Best Practice for Surface Preparation of Steel Substrates

Product Number: PB-C0M05-POD
ISBN: 978-1-57590-416-0
$185.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

The life of a coating depends as much on the degree and quality of surface preparation as on the selected coating system, because most coating failures can be attributed to inadequate surface preparation or lack of coating adhesion.

In this Standards and Best Practice for Surface Preparation of Steel Substrates reference book, students and technicians are provided with the basics of numerous surface preparation techniques, pertinent technical standards, and numerous case studies on how to apply the techniques and adhere to the standards.

2021 AMPP, black and white, soft cover, 376 pages.

 
Picture for Standards and Best Practice for Surface Preparation of Steel Substrates
Available for download

Standards and Best Practice for Surface Preparation of Steel Substrates

Product Number: PB-C0M05-pdf
ISBN: 978-1-57590-441-2
Author: Edited by Jean Broge
$185.00

The life of a coating depends as much on the degree and quality of surface preparation as on the selected coating system, because most coating failures can be attributed to inadequate surface preparation or lack of coating adhesion.

In this Standards and Best Practice for Surface Preparation of Steel Substrates reference book, students and technicians are provided with the basics of numerous surface preparation techniques, pertinent technical standards, and numerous case studies on how to apply the techniques and adhere to the standards.
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support