AMPP Store - Products tagged with 'polymeric coatings'

Available for download

Application of Fluid Applied Linings in Concrete Secondary Containment Structures

Product Number: 41208-397-SG

Author: Chris Ard

Publication Date: 2008

$20.00

This paper will focus on the application of polymeric coatings and linings, which include, but are not limited to, polyamine and novolac epoxies and vinyl esters. These materials are delivered to the job site in buckets or bags and are mixed and applied on-site, and it is the responsibility of the owner, engineer and material supplier to determine the type of material and coating system to specify for any particular project.

Available for download

Characterization of the Surface Mechanical Properties of Paints and Polymeric Surface Coatings

Product Number: 41206-280-SG

Author: Nicholas X. Randall

Publication Date: 2006

$20.00

The mechanical properties of polymeric coatings are often overlooked because researchers are not aware of how modern instrumentation can now aid them in understanding how a particular product may survive in service conditions. In many applications the two main considerations are aesthetics and durability, both of which can be directly related to the mechanical properties of the base material.

Available for download

CorrCompilation: Advancements for Control of Inorganic Scale, Volume 4 (e-book)

Product Number: 37651-e

ISBN: 978-1-57590-394-1

Author: edited by Wayne W. Frenier, FNACE

Publication Date: 2019

$125.00

This CorrCompilation series focuses primarily on equilibrium-formed scales, where an aqueous fluid changes from an unsaturated equilibrium state to a saturated and supersaturated state and then solids may start to form. These types of fouling minerals include alkaline earth salts, silicates, alkaline salts (NaCl), sulfides, and under specific circumstances, metal sulfide salts that form through equilibrium changes. While corrosion product scales are not the subject of this book, the importance of corrosion product layers to the deposition of other scales will be described.

Since this is a CorrCompilation and more than 90 copies of NACE papers are attached, the work is published in four volumes. The editor, Wayne W. Frenier, FNACE, provides an extensive introduction to each volume, offering the reader a thorough mix of history, theory, and engineering techniques and methods for addressing scale.

Volume 1: Introduction to Equipment Subject to Inorganic Scale

Volume 2: Current Mechanisms for Understanding Inorganic Scale Formation and Deposition

Volume 3: Chemistry and Application of Scale Inhibitors

Volume 4: Alternative Methods of Scale Control

This fourth volume, "Alternative Methods of Scale Control," reviews methods for controlling inorganic scale that provide alternatives to chemical SI methods or those that may be used with SIs to enhance management for an entire connected system. The first sections (1 and 2) describe non-chemical methods such as anti-scaling surfaces and electronic methods for reducing scale deposition.

Available for download

NACE TM0186-2023, Holiday Detection of Internal Tubular Coatings of 330 to 760 µm (13 to 30 mils) Dry Film Thickness

Product Number: NACE TM0186-2023

Publication Date: 2023

$109.00

This standard covers internal tubular polymeric coatings on a steel pipe/piping substrate. The standard defines and provides a procedure for the determination of the presence of holidays in a thick-film coating. This test method is based on the current technology and experience of the petroleum production industry This standard is intended for end users, manufacturers, applicators, corrosion engineers, and quality inspectors of internally coated metallic tubular goods.

Available for download

NACE TM0384-2023, Holiday Detection of Internal Tubular Coatings of Less Than 330 µm (13 mils) Dry Film Thickness

Product Number: NACE TM0384-2023

Publication Date: 2023

$109.00

This nondestructive test method describes a procedure to detect discontinuities (“holidays”) in thin-film polymeric coatings of less than 330 µm (13 mils) dry film thickness (DFT) applied to the internal surfaces of metallic tubular goods used in the oil and gas industry. The apparatus and the recommended procedure for performing the test are described, as are methods of reporting the test data.

A separate test method, NACE TM0186, addresses holiday detection of internal tubular good coatings of 330 to 760 µm (13 to 30 mils) dry-film thickness.

Products tagged with 'polymeric coatings'

Application of Fluid Applied Linings in Concrete Secondary Containment Structures

Characterization of the Surface Mechanical Properties of Paints and Polymeric Surface Coatings

CorrCompilation: Advancements for Control of Inorganic Scale, Volume 4 (e-book)

NACE TM0186-2023, Holiday Detection of Internal Tubular Coatings of 330 to 760 µm (13 to 30 mils) Dry Film Thickness

NACE TM0384-2023, Holiday Detection of Internal Tubular Coatings of Less Than 330 µm (13 mils) Dry Film Thickness

Association for Materials Protection and Performance