AMPP Store - Products tagged with 'low-alloy steels'

Available for download

AMPP TR21522-2024, Corrosion Testing for Additive Manufacturing

Product Number: AMPP TR21522-2024

Publication Date: 2024

$109.00

This technical report presents the current state of knowledge and gap analyses on corrosion testing of metallic materials produced using additive manufacturing (AM) technologies in environments relevant to several industrial applications. The discussed materials were produced primarily via laser powder bed fusion (LPBF), directed energy deposition (DED), and specifically the wire arc additive manufacturing (WAAM) form of DED. Many variables may not be sufficiently detailed in the rapidly evolving state of the art at the time of publication for the assessment of the performance of AM products; some variables such as microstructure, post-build processing, surface condition, residual stress, physical defects, and selection of representative test specimens (size and/or geometry) for a finished product are addressed. This report contains approaches for corrosion and environmental cracking assessment of AM materials, including test details that are relevant to the AM processes for some specific cases. The technical report provides the foundation for the preparation of test standard(s) that apply to AM products.

Available for download

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

Product Number: ANSI-NACE MR0103-2023

Publication Date: 2023

$200.00

Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.

Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.

This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.

Available for download

ANSI/NACE MR0103-2015/ISO 17945-2015, “Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments”

Product Number: 21305-SG

Publication Date: 2015

$180.00

HISTORICAL DOCUMENT. Material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments (i.e., environments that contain wet hydrogen sulfide [H2S]). AKA "wet H2S cracking".

CORRECTION OF PUBLICATION:

In January 2016, NACE published an incorrect version of ANSI/NACE MR0103/ISO 17945:2015 (Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments). That document was incorrectly titled ANSI/NACE MR0103/ISO 17495:2016. The erroneous standard was retracted at the time and the NACE Store has the corrected version. NOTE: The contents of both versions of the standard are identical. The only discrepancies are in the title.

Available for download

ANSI/NACE MR0175/ISO 15156-2009

Product Number: 21307-HD2009

Publication Date: 2009

$400.00

2009 EDITION - HISTORICAL DOCUMENT.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in oil and natural gas production and treatment plants with H2S-containing environments.

ANSI/NACE MR0175/ISO 15156-2015

Product Number: 21307-SG

ISBN: MR0175/ISO15156

Publication Date: 2015

$255.00

HISTORICAL DOWNLOADABLE 2015 EDITION.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment in oil and natural gas production and NG treatment plants in H2S-containing

ANSI/NACE MR0175-2021/ISO 15156:2020

Product Number: ANSI-NACE MR0175-2021

Publication Date: 2021

$495.00

Note: This document was originally published with errors in Table A.16, page 3-32. These identified errors are corrected. Errata sheet is included.

NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the equipment itself.

Available for download

ANSI/NACE/ISO MR0103-HD2010, Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments

Product Number: 21305-HD2010

ISBN: 1-57590-168-4

Publication Date: 2010

$179.00

HISTORICAL DOCUMENT. This NACE Standard establishes material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments, i.e., environments that contain wet hydrogen sulfide (H2S). It is intended to be used by refineries, equipment manufacturers, engineering contractors, and construction contractors.

Products tagged with 'low-alloy steels'

AMPP TR21522-2024, Corrosion Testing for Additive Manufacturing

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

ANSI/NACE MR0103-2015/ISO 17945-2015, “Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments”

ANSI/NACE MR0175/ISO 15156-2009

ANSI/NACE MR0175/ISO 15156-2015

ANSI/NACE MR0175-2021/ISO 15156:2020

ANSI/NACE/ISO MR0103-HD2010, Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments

Association for Materials Protection and Performance