AMPP Store - Products tagged with 'ceramic coatings'

Available for download

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

Product Number: ANSI-NACE MR0103-2023

Publication Date: 2023

$200.00

Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.

Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.

This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.

Available for download

ANSI/NACE MR0103-2015/ISO 17945-2015, “Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments”

Product Number: 21305-SG

Publication Date: 2015

$180.00

HISTORICAL DOCUMENT. Material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments (i.e., environments that contain wet hydrogen sulfide [H2S]). AKA "wet H2S cracking".

CORRECTION OF PUBLICATION:

In January 2016, NACE published an incorrect version of ANSI/NACE MR0103/ISO 17945:2015 (Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments). That document was incorrectly titled ANSI/NACE MR0103/ISO 17495:2016. The erroneous standard was retracted at the time and the NACE Store has the corrected version. NOTE: The contents of both versions of the standard are identical. The only discrepancies are in the title.

Available for download

ANSI/NACE MR0175/ISO 15156-2009

Product Number: 21307-HD2009

Publication Date: 2009

$400.00

2009 EDITION - HISTORICAL DOCUMENT.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in oil and natural gas production and treatment plants with H2S-containing environments.

ANSI/NACE MR0175/ISO 15156-2015

Product Number: 21307-SG

ISBN: MR0175/ISO15156

Publication Date: 2015

$255.00

HISTORICAL DOWNLOADABLE 2015 EDITION.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment in oil and natural gas production and NG treatment plants in H2S-containing

ANSI/NACE MR0175-2021/ISO 15156:2020

Product Number: ANSI-NACE MR0175-2021

Publication Date: 2021

$495.00

Note: This document was originally published with errors in Table A.16, page 3-32. These identified errors are corrected. Errata sheet is included.

NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the equipment itself.

Available for download

ANSI/NACE/ISO MR0103-HD2010, Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments

Product Number: 21305-HD2010

ISBN: 1-57590-168-4

Publication Date: 2010

$179.00

HISTORICAL DOCUMENT. This NACE Standard establishes material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments, i.e., environments that contain wet hydrogen sulfide (H2S). It is intended to be used by refineries, equipment manufacturers, engineering contractors, and construction contractors.

Available for download

Ceramic Epoxy Coatings in Immersion

Product Number: 51217-070-SG

Author: Ben Rowland

Publication Date: 2017

$20.00

Due to its success in the ductile iron wastewater pipe market, ceramic epoxy coatings are being increasingly specified and successfully applied on nearly every substrate used for immersion service in both the water & wastewater industry. Some unique characteristics set these epoxy coatings apart from their traditional counterparts. For instance, ceramic epoxy systems provide high-film builds, eliminate undercutting, minimize permeability, provide superior edge retention and form a non-ablative film.

Available for download

Impact and Abrasion Resistant Coatings and Overlays for Immersion Structures in Severe Environments

Product Number: 51216-003-SG

Author: Jeffrey Ryan, Richard Lampo, Hota V.S. GangaRao, P.V. Vijay

Publication Date: 2016

$20.00

The U.S. Army Corps of Engineers owns and operates the vast majority of the countries lock and dam structures for inland navigation. The large steel gates on these structures are subjected to a severe impact and abrasive environment while in immersion by debris such as timber, ice, steel drums, etc. High VOC vinyl resin coatings have historically been the best available coatings for these structures in this environment but have exhibited very poor performance at the water line where the impact and abrasion is at its worse.

Available for download

Suspension Plasma Spray of TiO2, CuO and Fe3O4 Coatings And Their Corrosion Behaviour

Product Number: 51321-16302-SG

Author: Garima Mittal; Francesco Fanicchia; Imram Bhamji; Shiladitya Paul

Publication Date: 2021

$20.00

Available for download

Suspension-High Velocity Oxy-Fuel Spray Tio2 Coatings And Their Corrosion Behaviour

Product Number: 51322-17637-SG

Author: Garima Mittal, Imran Bhamji, Alexandre Sabard, Shiladitya Paul

Publication Date: 2022

$20.00

With the increased pollution and energy demand, industries are shifting towards cleaner and greener power generation source. Geothermal energy, where energy is derived from the sub-surface of earth, is an excellent and continuous source of energy. Despite having the potential of providing cleaner energy, there is a huge gap between the theoretical potential of geothermal power plants and their practical applications. Some of the major reasons are high power generation cost and poor efficiency of the plant.

Products tagged with 'ceramic coatings'

Association for Materials Protection and Performance