AMPP Store - Products tagged with 'amines'

Available for download

06581 IDENTIFYING THE IMPACTS OF AMINE CONTAMINATION ON CRUDE UNITS

Product Number: 51300-06581-SG

ISBN: 06581 2006 CP

Author: Randy Rechtien, George Duggan

Publication Date: 2006

$20.00

This paper discusses common amine sources and amine identification methods, the equipment commonly impacted and the steps which can be taken to address the challenge of amine contamination.

Available for download

51312-01209-Use of Ionic Modeling to Gain New Insights on Crude Unit Overhead Corrosion

Product Number: 51312-01209-SG

ISBN: 01209 2012 CP

Author: Amit B. Patel

Publication Date: 2012

$20.00

Crude unit overhead systems contain complex mixtures of hydrocarbon water and various ionic species. Ionic modeling has been used to better understand the rapidly changing phase behavior in this system and to shed some light on some factors which may influence corrosion.

Available for download

Evaluation of Glass Reinforced Plastic for Post Combustion CO2 Capture Amine Service

Product Number: 51323-18832-SG

Author: Anupom Sabhapondit, Aruna V T, Rajiv Srinivasan, Karl Stephenne, Sukanta Ghosh

Publication Date: 2023

$20.00

Carbon capture and storage as well as sequestration (CCS) and carbon capture and utilization (CCU) has been gaining immense importance in recent times as one of the practically achievable solutions to reduce global CO2 emissions, especially from industrial sources and thus reduce global warming. The use of different commercially available amine formulations is a well-established and widely used technology to capture the CO2 gas from industrial gas streams. Amines in liquid form, mostly mixed with water as well as in solid form, many times incorporated in nanomaterials are used to capture CO2 from industrial gas streams, eg., tail gas from power plants.

Available for download

Guidance For Thermal Stability Of Common Oilfield Chemicals

Product Number: 51322-17745-SG

Author: Tracey Jackson, Johnathon Brooks, Zhengwei Liu, Sunder Ramachandran

Publication Date: 2022

$20.00

As oilfield technologies have advanced, they have made high temperature (HT) reservoirs more accessible. HTs make the application of chemical more difficult because chemical instability at HT restricts what intermediates will work in these environments and the safety and complexity of HT testing further adds to the challenge.

Available for download

Study Of Inhibition Efficiency Of Volatile Corrosion Inhibitors In the Presence Of Heptane

Product Number: 51322-18003-SG

Author: Maryam Eslami, Marc Singer

Publication Date: 2022

$20.00

Top of the line corrosion (TLC) is a phenomenon encountered in the transportation of wet gas, where temperature differences between the pipelines and the surroundings lead to condensation of water and subsequent metal degradation. This kind of corrosion occurs due to the condensation of saturated vapors present in the unprocessed gas stream which collects on the internal surface of the cold pipe wall. The condensed liquid contains hydrocarbons and water. It forms a thin film and/or droplets of liquid on the pipeline. The condensed water phase can be, at least initially, very corrosive to typical pipeline (made of carbon steel), because it contains dissolved acid gases (such as carbon dioxide [CO₂] and hydrogen sulfide [H₂S]) and organic acids (such as acetic acid [CH₃COOH]).¹

Available for download

Unveiling the Mechanical Feasibility of Glass Reinforced Plastic for Post Combustion CO2 Capture Amine Service: A Thorough Examination

Product Number: 51324-20710-SG

Author: Arun Kumar Sharma; Sukanta Ghosh; Rajiv Srinivasan; Anupom Sabhapondit; Karl Stephenne

Publication Date: 2024

$40.00

Mitigating global warming and reducing CO2 emissions from the environment necessitates the implementation of carbon capture, sequestration, and storage (CCS) as an immediate and feasible solution. Amines are widely employed to capture CO2 gas from industrial exhaust streams. To enhance the cost-effectiveness of amine services, the incorporation of glass-reinforced plastic material holds immense potential for substantial cost benefits. The primary aim of this study is to assess the feasibility of utilizing glass-reinforced plastic (GRP) as a construction material for vessels, piping, and ducting in the cold section of the carbon capture and storage (CCS) system. The research examined the potential of completely replacing metallic equipment and piping (such as carbon steel (CS), stainless steel (SS) or SS cladded CS) with GRP materials. The investigation revealed that complete substitution of GRP for certain CO2 service components, including the scrubber, pre-scrubber, tanks, piping, and ducting, may be feasible under specific process conditions. These process conditions encompassed temperatures below 100°C, pressures below 10 bar for piping, and pressures below 0.2 bar for the remaining components. Two fabrication methods, filament winding and contact molding, were employed throughout the design calculations and utilizing corresponding material properties. A chemical compatibility study by Shell, presented at the 2023 AMPP conference and expo (Paper # AMPP-2023-18832), confirmed that the selected resins used to prepare the GRP material are chemically compatible with the commercial amine formulation used for CO2 capturing at the same application limit identified for the present work. The study unequivocally confirmed that glass-reinforced plastic can be incorporated with confidence, adhering to the safety limits prescribed by international standards. This resounding validation strengthens the viability and applicability of GRP in the given context, bolstering its position as a reliable and suitable construction material.

Products tagged with 'amines'

06581 IDENTIFYING THE IMPACTS OF AMINE CONTAMINATION ON CRUDE UNITS

51312-01209-Use of Ionic Modeling to Gain New Insights on Crude Unit Overhead Corrosion

Evaluation of Glass Reinforced Plastic for Post Combustion CO2 Capture Amine Service

Guidance For Thermal Stability Of Common Oilfield Chemicals

Study Of Inhibition Efficiency Of Volatile Corrosion Inhibitors In the Presence Of Heptane

Unveiling the Mechanical Feasibility of Glass Reinforced Plastic for Post Combustion CO2 Capture Amine Service: A Thorough Examination

Association for Materials Protection and Performance