AMPP Store - Products tagged with 'corrosion inhibitors'

Available for download

Chemical Prevention of Corrosion-Induced Premature Well Failures Using a Novel Lubricity Mitigation Strategy

Product Number: 51323-18939-SG

Author: Jason Kisel, Leanne Seher, Garett Heath, Temi Okesanya

Publication Date: 2023

$20.00

The production of hydrocarbons from a reservoir involves the drilling and interaction of a well with a reservoir, which initiates the natural flow of the hydrocarbons from the virgin reservoir to the surface. However, as production continues, the reservoir pressure is depleted, which results in a reduction of the hydrocarbon production rate due to reservoir maturity. This is usually accompanied by increased water-cut levels and a corresponding decrease in gas production, which may not only reduce but completely stop the flow of fluids from a well.

Available for download

Closed Loop Corrosion Control: Case Studies Of A Reliable, Robust, & Sustainable Treatment Program

Product Number: 51322-17723-SG

Author: Michael P. Weberski Jr., Claire Rayner, Dan Meier, Renate Ruitenberg, Bingzhi Chen, Sai Sudhakaran, Steef Vrijhoeven

Publication Date: 2022

$20.00

An emerging market driver in industrial water treatment is the move to more sustainable chemistries. Corporate sustainability goals are becoming more common and more stringent. Customers are turning to water treatment companies for innovative solutions that can satisfy their sustainability goals and not sacrifice performance or asset integrity. Indeed, a major trend in evaporative open cooling water treatment is to move away from heavy metals such as zinc and other environmentally questionable materials such as phosphates. Another area of cooling water that is in need of a sustainability refresh is closed cooling loops. The most widespread closed cooling treatment programs are based on combinations of nitrite, molybdate, and borate. All three of these chemicals have regulatory, discharge and/or SH&E concerns.

Available for download

Coating Metal for Commercial Settings

Product Number: 41211-651-SG

Author: Dewayne Steele

Publication Date: 2011

$20.00

Metal Components- Selection of coatings for use on joists, canopies, and structural steel, including problems with protecting steel that penetrates concrete or the ground.

Available for download

Compostable VCI Film Brings Corrosion Protection "Back to Nature"

Product Number: 51324-20431-SG

Author: Djurin Antonia; Ming Shen; Dijana Zrinski; Julie Holmquist

Publication Date: 2024

$40.00

Presented here is a certified industrial compostable vapor phase corrosion inhibitor film that meets EN 13432/ASTM D6400 standards for commercial compostability. It passes NACE VIA (Vapor Inhibiting Ability) requirements and provides the same corrosion protection as conventional inhibitor film. But unlike conventional film going to a landfill or, worse, becoming ocean debris, this compostable film will biodegrade in an industrial compost site and go back to soil components without posing an ecotoxicity threat to plant growth. The paper will discuss the material's construction, mechanical properties, and corrosion performance. This film has been adopted successfully by a major European auto maker for shipping parts around the world.

Available for download

CorrCompilation: Oil Production Chemicals, Volume 2 (e-book)

Product Number: 37638-e

ISBN: 978-1-57590-397-2

Author: Edited by Joseph Itodo Emmanuel

Publication Date: 2019

$130.00

The “CorrCompilation: Oilfield Production Chemicals” series covers production, selection, performance evaluation, application, monitoring, and optimization of oilfield chemicals. The oilfield chemicals presented are corrosion inhibitors, biocides, scale inhibitors, and drag reducers. The editor, Joseph Itodo Emmanuel, believes it is a “must-have reference book” for corrosion engineers in the field, technicians, and field operation supervisors due to its broad spectrum.

He suggests the compilation could be used for a university-level engineering or scientific course on oilfield chemicals or tailored training to enhance the technical knowledge of field personnel on oilfield chemical application and management.

Since this CorrCompilation series consists of 90 NACE technical papers or articles, it is published in three volumes.

Volume 1: Development and Selection

Volume 2: Performance Evaluation and Application

Volume 3: Monitoring and Optimization

Each volume contains current research findings, field treatment practices, best practices, and scientific and engineering concepts.

2019 NACE e-book

Available for download

Correlating physical chemistry with interfacial properties: Effect of salinity on the partitioning, distribution and performance of a quaternary amine corrosion inhibitor

Product Number: 51323-19142-SG

Author: Richard Barker, Joshua Owen, Richard C. Woollam, Yasmin Hayagheib, Raeesa Bhamji, Jeanine Williams, William H. Durnie, Mariana C. Folena, Abubaker Abdelmagid, Hanan Farhat

Publication Date: 2023

$20.00

Corrosion inhibitors provide a cost effective method for internal corrosion control of carbon and low alloy steel infrastructure within the oil and gas industry. The correct selection and validation of inhibitors is essential to ensure successful, safe and reliable operation of infrastructure. Corrosion inhibitors used in upstream oil and gas production are characteristic of surfactant molecules, which adsorb at the metalsolution interface, creating a dynamic physical barrier that reduces electrochemical dissolution.

Corrosion Control in Petroleum Production, 3rd Edition

Product Number: 37646-POD

ISBN: 978-1-57590-389-7

Author: Robert J. Franco & Timothy Bieri

$148.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This greatly updated and expanded third edition of Corrosion Control in Petroleum Production is written for non-experts who have the responsibility for corrosion management of subsurface, surface, and subsea equipment used for producing and processing oil and natural gas.

The book provides an overview and reference on the different corrosion threats, the methods for controlling corrosion, and the establishment of a management system based on risk and continuous improvement.

The authors, Robert Franco and Tim Bieri, have distilled over 80 years of personal experience--as well as the experience from multiple reviewers and contributors--into one comprehensive reference.

Included are hundreds of photographs, figures, and tables to illustrate the practical aspects and essential theory of corrosion control and materials selection.

2020 NACE, 536 pages, 6 x 9" trim size, perfect bound, color

Available for download

Corrosion Control in Petroleum Production, Third Edition

Product Number: 37646-pdf

ISBN: 978-1-57590-469-6

Author: Robert J. Franco & Timothy Bieri

Publication Date: 2020

$145.00

This greatly updated and expanded third edition of Corrosion Control in Petroleum Production is written for non-experts who have the responsibility for corrosion management of subsurface, surface, and subsea equipment used for producing and processing oil and natural gas. It provides an overview and reference on the different corrosion threats, the methods for controlling corrosion, and the establishment of a management system based on risk and continuous improvement.

Available for download

Corrosion Control in Petroleum Production, Third Edition (e-book)

Product Number: 37646-e

ISBN: 978-1-57590-411-5

Author: Robert J. Franco & Timothy Bieri

Publication Date: 2020

$140.00

This greatly updated and expanded third edition of Corrosion Control in Petroleum Production is written for non-experts who have the responsibility for corrosion management of subsurface, surface, and subsea equipment used for producing and processing oil and natural gas. It provides an overview and reference on the different corrosion threats, the methods for controlling corrosion, and the establishment of a management system based on risk and continuous improvement.

The authors, Robert Franco and Tim Bieri, have distilled 80 years of personal experience--as well as the experience from multiple reviewers and contributors--into one comprehensive reference. Included are hundreds of photographs, figures, and tables to illustrate the practical aspects and essential theory of corrosion control and materials selection.

All NACE e-books are available as mobi files. The mobi is a common e-book format that can be opened by many e-book readers, though NACE suggests Kindle for optimized viewing. The Kindle app is available for free on Amazon for iOS (Apple devices), Android devices, MACs, and PCs at https://www.amazon.com/kindleapps

Once you download your e-books, they will automatically open in your Kindle app. To find your book in the future, open the app and click on library. This is where all your future NACE e-books (and all your other mobi e-books) will appear, in your personalized library.