AMPP Store - Products tagged with 'anode'

Available for download

51317--9700-Galvanic Cathodic Protection for High Resistance Concrete in Marine Environments

Product Number: 51317--9700-SG

ISBN: 9700 2017 CP

Author: Ivan Lasa

Publication Date: 2017

$20.00

For reinforced concrete (RC) structures that are in drier locations but still need of cathodic protection (CP), impressed current cathodic protection (ICCP) systems are preferred. In this study, the performance of activated zinc anodes installed on dry or high resistance concrete on Florida Bridges was evaluated.

Available for download

CFRP Reinforcement Anode For Cathodic Protection Of Steel Rebar

Product Number: 51322-17877-SG

Author: Xavier Hallopeau, Olivier Lesieutre, Camille Annede-Villeau

Publication Date: 2022

$20.00

Only a few researchers have studied the effect of carbon fiber repair on corrosion processes. The main protective effect is the "protective barrier" which is sometimes called passive protection against corrosion, comparable to some techniques such as anticorrosion coatings of concrete structures. Indeed, CFRP materials, applied as external reinforcing material on reinforced concrete structures form a protective barrier against the penetration of moisture and pollutants such as chlorides or carbon dioxide.^1.2.3.4.5 Apart from this impermeable barrier action, it has been found in these studies that the confinement of CFRP concrete has a positive influence on the onset of corrosion and on its velocity. Very little research has investigated the coupling between mechanical reinforcement and impressed current system.^6,7,8

Available for download

Considerations Associated with the Selection of Electrochemical Protection Systems for Reinforced Concrete Structures

Product Number: 51323-19045-SG

Author: Atef Cheaitani, Samir Cheytani, Martin Cheytani

Publication Date: 2023

$20.00

Impressed current cathodic protection (ICCP) for reinforced concrete structures has been installed on numerous bridges and wharves in Australia over the past 40 years. The exposure conditions at the majority of these bridges and wharves made them more susceptible to chloride-induced corrosion.

The ICCP systems in Australia are designed, installed and monitored in accordance with the global cathodic protection standards such as AMPP Standard SP 0290-2019, International Standard ISO 12696:2022, and Australian Standard AS 2832.5 – 2008 (R2018).

Available for download

Galvanic Current Density Measurements Of Anodes For Subsea Vibration Data Logger (SVDL) System

Product Number: 51321-16717-SG

Author: Suresh Divi; Melissa Gould; and Dan Efird

Publication Date: 2021

$20.00

Available for download

NACE SP0169-2024, Control of External Corrosion on Underground or Submerged Metallic Piping Systems

Product Number: NACE SP0169-2024

Publication Date: 2024

$109.00

This standard presents methods and practices for achieving effective control of external corrosion on underground or submerged metallic piping systems and is intended for use by corrosion control personnel concerned with piping used for the transport of oil, gas, water, and other fluids. It is applicable to underground structures and piping buried on land, or submerged in water bodies such as lakes, rivers, bayous, and creeks.

Available for download

NACE SP0572-2024, Design, Installation, Operation, and Maintenance of Impressed Current Deep Anode Systems

Product Number: NACE SP0572-2024

Publication Date: 2024

$109.00

The purpose of this AMPP standard practice is to present procedures and practices for the design, installation, operation, and maintenance of deep anode systems used for the control of external corrosion of underground or submerged metallic structures by impressed current cathodic protection (ICCP). It is intended to be used in conjunction with NACE SP0169 and SP0177. This standard is intended to be used by corrosion engineers, corrosion consultants, representatives from manufacturers, and others concerned with corrosion control of underground structures.

Available for download

Performance of Distributed Galvanic Anode Systems in Bridge Structures

Product Number: 51323-19214-SG

Author: Ben Ricker, Max Nie, Liao Haixue

Publication Date: 2023

$20.00

Corrosion of reinforcing steel is recognized as the major cause of the deterioration of reinforced concrete structures. Exposure to de-icing salts, seawater and chloride-containing set accelerators, plays a significant role in reinforcing steel corrosion (Figure 1). When the chloride content at the rebar level exceeds the threshold for initiation of corrosion, the passivation protective film on the rebar surface is destroyed and a corrosion cell can form either on the same piece of rebar with anodic and cathodic sites adjacent to each other, or a macro-cell between two different layers of reinforcement.

Available for download

TM0204-2019 “Exterior Protective Coatings for Seawater Immersion Service”

Product Number: 21244-2019

ISBN: 1-57590-190-0

Publication Date: 2019

$109.00

This updated NACE International standard test method specifies test methods to evaluate the performance of liquid coating systems for seawater immersion services. This test method is intended for use by facility owners and coating manufacturers.The test method covers liquid exterior protective coating systems for offshore platform steel structures, piers, docks, pilings, subsea valves, and wellheads at normal seawater temperature.

Included are four test methods—including cathodic disbondment, seawater immersion resistance, aging stability, and edge coverage—used to evaluate coating systems. The test method also includes two tables; Table 1 details fingerprinting of coating materials, and Table 2 details the test panel geometry, size, substrate material, and minimum quantity.

Products tagged with 'anode'

Association for Materials Protection and Performance