AMPP Store - Products tagged with 'equipment'

Available for download

“This Ain’t Your Mothers Dehumidifier Anymore! New Advancements in Temporary Dehumidification Equipment Meets “Green” Objectives While Reducing Operating Costs

Product Number: 41211-589-SG

Author: Russ Brown, David Simkins

Publication Date: 2011

$20.00

The paint and coatings industry has witnessed significant change over the past 50 years. These changes have been driven by many factors including VOC mandates, safety concerns, advanced polymers and new demands of the end users and materials. One of those changes was the introduction of desiccant dehumidification to assist in the blast and coatings process of liquid storage tanks in 1983. The ability to indefinitely hold a blast by providing a dry climate mechanically set off the beginning of a technology that would continue to advance for years to come.

Available for download

11334 Green Shelters Dehumidification for Corrosion Attenuation & Improved Maintenance Flexibility

Product Number: 51300-11334-SG

ISBN: 11334 2011 CP

Author: Doug Banning

Publication Date: 2011

$20.00

Corrosion prevention and control for equipment is a costly and decreasingly effective activity for the Air Force, especially under scenarios to austere locations. One concept for remedy is a modular shelter, powered with mobile generators using integrated energy sources to reduce operational costs.

Available for download

A Ground Floor Opportunity in the World of Commercial Coatings Inspection

Product Number: 41216-978-SG

Author: Davis Kyle , Richard Bright

Publication Date: 2016

$20.00

Commercial & Residential Coatings Inspection is emerging as a new market that will provide tactical and ground floor opportunities to those involved while bringing additional value to the architectural coatings industry as a whole. This presentation will provide insight to the participants on the recommended experience, skill set, and education required to set up a successful Commercial Coating inspection service or agency.

Available for download

A Study on Improving Surface Preparation Productivity Using Rectangular Blasting Nozzle

Product Number: 41216-980-SG

Author: ChangHun Lee, ByeongHun Do, WonJun Yun, HanJin Bae

Publication Date: 2016

$20.00

The purpose of surface preparation is to get a required adhesion between steel and the coated film. Adhesion is a significant factor for the suitability and life of protective coatings in corrosive surroundings. In the shipbuilding industry, air blasting with round blasting nozzles is common practice for achieving the productivity and proper surface profile. Generally, the round blasting nozzle cannot evenly spread the abrasive material on a steel surface compared with a rectangular nozzle.

Available for download

Air Balancing is More Than a Building Science

Product Number: 41214-858-SG

Author: David Simkins

Publication Date: 2014

$20.00

This paper will discuss utilizing temporary dehumidification and climate control equipment to reduce corrosion levels during the installation of coatings and linings applications; the science of Psychrometrics, the science behind dehumidification, and discuss how the components interact on a coatings project.

Available for download

An Introduction To Low Pressure, Ambient Temperature Polyurea Spraying

Product Number: 41211-616-SG

Author: Stephen Hirt

Publication Date: 2011

$20.00

The purpose of this presentation is to introduce you to low-pressure, ambient temperature spraying of polyurea and to discuss the advantages of low-pressure spray equipment. Some of the inherent advantages are equipment cost, ease of use, less over-spray, and equipment mobility. This presentation will be divided into several key areas. We will examine features and benefits, general equipment specifications, capabilities, operation of the system, typical periodic maintenance requirements and examples of available options.

Available for download

Biodegradable Method of Corrosion Management for All Industries

Product Number: 51317--9136-SG

ISBN: 9136 2017 CP

Author: Larry Mudd

Publication Date: 2017

$20.00

Most effective and latest technology in corrosion prevention for protection of boiler systems, turbines, pumps, storage tanks, heat recovery steam generator systems, generators, and piping systems. Protection of the system is based on “temporary” corrosion inhibitors.

Available for download

Cool, Dry Or Both When Is Cooling Equipment Appropriate As A Dehumidifier?

Product Number: 41213-784-SG

Author: Don J. Schnell

Publication Date: 2013

$20.00

As the technology of dehumidification has developed over the last 25 years, the air conditioner has always played an active role, right along with its sister, the desiccant dehumidifier. The benefits of a refrigeration-based dehumidifier are both obvious and obscure.

Available for download

Education on the Differences Between Wet Abrasion Blasting and Water Jetting

Product Number: 41214-823-SG

Author: Duane T. Hough

Publication Date: 2014

$20.00

There is a wide gulf in the industry between the capabilities of water jetting and wet abrasive blast equipment capabilities and the perception of their capabilities. The misinformation frequently leads to miscommunication between the various parties involved in projects where the equipment and associated standards are used.

Available for download

Gearbox Corrosion Mitigation During Storage and Intermittent Operation

Product Number: 51324-20747-SG

Author: Pavlo Solntsev; James Holden

Publication Date: 2024

$40.00

Gearboxes are one of the most critical pieces of equipment in a plant. Downtime because of gearbox failure can significantly impact manufacture and be very costly. An additional inventory of spare gearboxes is needed to minimize the effect of the loss. All gearboxes operating and during storage are susceptible to corrosion due to moisture condensation on the metal surfaces. The work describes oil additives that protect gearboxes during operation, layup, and warehouse storage. As was proved, the corrosion can be mitigated by adding a Vapor Corrosion Inhibitor (VCI) to the system. The testing methodology to verify the effectiveness of the oil additives, as well as compatibility with the base oil, was presented. Based on the present work, a specification for gearbox preservation during storage was developed.

Available for download

How Blast and Coat Climate Control Equipment Restored Prominent Facilities in New Orleans Post-Katrina

Product Number: 41209-507-SG

Author: Don Schnell

Publication Date: 2009

$20.00

Industry executives involved in industrial blasting and coating projects may find it surprising that climate control equipment typically used in those processes played a major role in recovery efforts in New Orleans following Hurricane Katrina. This paper highlights how this equipment helped restore three important structures in New Orleans – the Louisiana Superdome, Notarial Archives and the evidence room of the New Orleans Police Department.

Available for download

How to Write a Good Process Control Procedure

Product Number: 41212-709-SG

Author: Richard L. Smith

Publication Date: 2012

$20.00

In the past, the present and undoubtedly in the future, coating specifications will be written and included in bid packages that will end up on your desk, mine and our fellow colleagues. Often these specifications are poorly written, boiler plated or haphazardly thrown together to hopefully provide us with enough information to successfully win and complete a given contract.

Products tagged with 'equipment'

Association for Materials Protection and Performance