AMPP Store - Products tagged with 'metals'

Available for download

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

Product Number: ANSI-NACE MR0103-2023

Publication Date: 2023

$200.00

Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.

Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.

This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.

Available for download

ANSI/NACE MR0103-2015/ISO 17945-2015, “Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments”

Product Number: 21305-SG

Publication Date: 2015

$180.00

HISTORICAL DOCUMENT. Material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments (i.e., environments that contain wet hydrogen sulfide [H2S]). AKA "wet H2S cracking".

CORRECTION OF PUBLICATION:

In January 2016, NACE published an incorrect version of ANSI/NACE MR0103/ISO 17945:2015 (Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments). That document was incorrectly titled ANSI/NACE MR0103/ISO 17495:2016. The erroneous standard was retracted at the time and the NACE Store has the corrected version. NOTE: The contents of both versions of the standard are identical. The only discrepancies are in the title.

Available for download

ANSI/NACE MR0175/ISO 15156-2009

Product Number: 21307-HD2009

Publication Date: 2009

$400.00

2009 EDITION - HISTORICAL DOCUMENT.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in oil and natural gas production and treatment plants with H2S-containing environments.

ANSI/NACE MR0175/ISO 15156-2015

Product Number: 21307-SG

ISBN: MR0175/ISO15156

Publication Date: 2015

$255.00

HISTORICAL DOWNLOADABLE 2015 EDITION.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment in oil and natural gas production and NG treatment plants in H2S-containing

ANSI/NACE MR0175-2021/ISO 15156:2020

Product Number: ANSI-NACE MR0175-2021

Publication Date: 2021

$495.00

Note: This document was originally published with errors in Table A.16, page 3-32. These identified errors are corrected. Errata sheet is included.

NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the equipment itself.

Available for download

ANSI/NACE/ISO MR0103-HD2010, Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments

Product Number: 21305-HD2010

ISBN: 1-57590-168-4

Publication Date: 2010

$179.00

HISTORICAL DOCUMENT. This NACE Standard establishes material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments, i.e., environments that contain wet hydrogen sulfide (H2S). It is intended to be used by refineries, equipment manufacturers, engineering contractors, and construction contractors.

Available for download

Application of The Corrosion Resistant Alloy/ Carbon Steel Bimetal Pipes in Oil and Gas Field Development

Product Number: 51323-19237-SG

Author: Hang Su, Wensheng Li, Anqing Fu, Chengxian Yin

Publication Date: 2023

$20.00

Bimetal composite pipes composed of carbon steel and corrosion resistant alloys have attracted increasing attention for the applications in the fields of transferring pipes, downhole tubes, reservoirs and heat exchangers. It shows superior properties such as corrosion resistance of the corrosion resistant alloys and formability, and mechanical properties of carbon steels, which satisfy the requirements of both anti-corrosion and mechanical properties applied in oil and gas filed with an affordable price.

A series of manufacturing methods for the fabrication of bimetal composite pipes, including mechanical bonding method, welded pipe using the clad plate and inner surfacing welding clad pipe, have been applied in recent years.

Available for download

Corrosion and Its Control: An Introduction to the Subject, Second Edition (e-Book)

Product Number: 37552-E

ISBN: 1877914711

Author: J.T.N. Atkinson and H. Van Droffelaar

Publication Date: 1995

$90.00

This NACE best-seller is based on the authors' course, The Corrosion & Protection of Metals. This edition of this classic text is based on notes used by the authors for more than a decade in their course, The Corrosion and Protection of Metals. The authors emphasize the engineering aspects of corrosion and its control in ways that will be helpful to the practicing engineer. Topics covered include corrosion economics, detecting and monitoring corrosion, regulations, specifications, safety, and the selection and use of materials, with special emphasis on stainless steels. 1995 NACE E-BOOK

Corrosion Management and Control in Desalination: An Industrial Guide

Product Number: 37670-POD

ISBN: 978-1-57590-422-1

Author: Roger Francis and Abdelkader Meroufel

$135.00

The authors of Corrosion Management and Control in Desalination: An Industrial Guide have been active in all types of desalination plants for decades, either solving corrosion problems, or, less often, preventing them from happening.

This book is written and intended for the plant engineer, a vital plant employee who often does not have an in-depth knowledge of corrosion, and could use help with day-to-day problems that may involve corrosion.

2023 AMPP, 144 pages, 6x9 trim size, color

Available for download

Evaluation of Coatings for High-Temperature Process Vessel Applications

Product Number: 51324-20612-SG

Author: Bing Yuan; Muni Ramakrishnan

Publication Date: 2024

$40.00

Offshore process vessels of the oil/gas industry operate at high temperatures and sometimes high pressure. Protective coatings designed for high-temperature vessels need to withstand very high temperatures, e.g., higher than 200°C (392oF). The evaluation and determination of their fitness for use at such high-temperature conditions are challenging. In this paper, we demonstrated the use of multiple analytical methods (DMA, DSC, Dilatometer) in the investigation and characterization of structure stabilities of protective coatings in high temperature environment. We analyzed 3 coating samples by DMA with temperature ramping, thermal cycling experiments and thermal stress test. The results of DMA, combined with that from DSC, Dilatometer and mechanical tests provided us deep understanding of high temperature properties of the 3 coating samples. The study also explained the cause of cracking failures of 2 of the samples at different high temperature conditions. The methodology of this paper provides a good way to guide future development work and failure root cause analysis of protective coatings for high temperature applications.

Available for download

Impact of Support Dissolution on the Corrosion Resistance of 316L Stainless Steels

Product Number: 51321-16449-SG

Author: Stephanie Prochaska/Owen Hildreth

Publication Date: 2021

$20.00

Available for download

Investigation Of Corrosion In WAAM Manufactured Materials

Product Number: 51322-18133-SG

Author: Aishwarya, Benoit Verquin, Quentin Petavy, Robert Shandro, Liam Kok Chye

Publication Date: 2022

$20.00

Among the many additive manufacturing processes, Wire Arc Additive Manufacturing (WAAM) has recently been drawing interest due to its great and attractive prospect for fabrication of large parts, the possibility to process a vast range of materials in form of welding wires, and the addition of further details to semi-finished components [1]. However, most of the research have currently focused on optimization of the WAAM process parameters and analysis of the resulting thermal and residual stresses [2]. Unlike conventional manufacturing processes, WAAM process and post-processing treatments result in unique microstructures and material surfaces that alter the corrosion performance of the materials but are not fully studied or understood yet.

Products tagged with 'metals'

Association for Materials Protection and Performance