AMPP Store - Products tagged with 'Conference Papers'

Available for download

Review on the Heat-Resistant Stainless Steel Alloys Used for the Steam Methane Reformer Outlet Systems

Product Number: 51317--9351-SG

ISBN: 9351 2017 CP

Author: Shankar Venkataraman

Publication Date: 2017

$20.00

Both cast (UNS N08151) and wrought (UNS N08810/N08811) metallurgies have been used for outlet components. The microstructural features responsible for material performance, the various microstructural alterations occurring in service are reviewed as are the impact on serviceability and on, repair weldability and examples of failures.

Available for download

Revisiting Alloy K-500 with Improved Performance Limits for Short and Long-Term Subterranean Applications

Product Number: 51323-18787-SG

Author: Manuel Marya

Publication Date: 2023

$20.00

Alloy K-500 (UNS N05500) is concomitantly a centurial material and the very first precipitation-strengthened nickel-based alloy, then developed in the 1920s by the newly-formed International Nickel Company, or Inco.
Derived from Monel 400 (UNS N04400) that was invented in 1901, Alloy K-500 shares many of the same corrosion and tribological characteristics. Being a pioneer alloy with so-called “stain-less” characteristics, Alloy
K-500 also established itself as the first high-strength oilfield nickel alloy, having survived sour service conditions exceeding the capabilities of the low-alloy steels of the time. From early naval propeller shaft applications to
general cross-industrial uses, Alloy K-500 has always been considered a corrosion-resistant alloy, or CRA. For instance, it has been included in the NACE MR1075 document right from the first 1975 edition.

Available for download

Robotic Sprayed-in-Place Pipelining: the Polyurea Goes Round & Round

Product Number: 41214-847-SG

Author: Dudley J Primeaux II, Todd Gomez

Publication Date: 2014

$20.00

The polyurea technology is not new to pipelining work, with earlier basic applications dating back more than 15 years. Much of this work was either performed by hand spraying (large diameter pipe) or simple robotic systems for individual joint sections of pipe. Continued work over the years has proven that in-place pipelines can be commercially completed as well. More recent work has even shown that in addition to long, straight runs, robotic developments have allowed for lining both 45° and 90° radius bends in the pipeline system.

Available for download

Role of Crack Tip Strain Rate on the Fatigue and Fracture Behavior of Line Pipe Steel in Sour Environments

Product Number: 51317--9203-SG

ISBN: 9203 2017 CP

Author: Thodla Ramgopal

Publication Date: 2017

$20.00

Fatigue and fracture of line pipe steels in a sour inhibited environment is presented. Fatigue crack growth rate (FCGR) was investigated as a function of frequency at several different K values at a pH of 3.5 and 0.21psia (0.00144MPa) H2S.

Available for download

Role of H2S In Localized Corrosion and Cracking of CRAs in Upstream Oil and Gas Applications

Product Number: 51317--9463-SG

ISBN: 9463 2017 CP

Author: Gareth Hinds

Publication Date: 2017

$20.00

Materials qualification testing of corrosion resistant alloys (CRAs) typically involves the use of simple pass/fail tests. Modification of existing standards is recommended for environments in which pit initiation is statistically improbable but pit propagation is rapid, e.g. low chloride/high H2S.

Available for download

Role of Hydrogen in Intergranular Corrosion of AA2024 Aluminium Alloy: An AFM-KFM Study

Product Number: 51317--9464-SG

ISBN: 9464 2017 CP

Author: Christine BLANC

Publication Date: 2017

$20.00

A powerful way to study hydrogen embrittlement at a local scale is by Scanning Kelvin Probe Force Microscopy (SKPFM). This technique by measuring the surface potential at the nanometer scale allows the detection and localization of hydrogen in the alloy.

Available for download

Root Cause and Forward Thinking Decisions

Product Number: 41215-928-SG

Author: Doug Sawyer

Publication Date: 2015

$20.00

We often make decisions in haste, using poor factoring, not thinking through all the variables, ignoring risk, and a great number of other things we won’t mention right now but you can imagine. What decisions or effort do we do daily that could be enhanced by better decisions, and by default better process. A decision is made up of pieces, each piece providing a building block to the end. What pieces we use make a difference.

Available for download

Round-Robin Evaluation Of ISO 20340 Annex A Test Method

Product Number: 51316-6991-SG

ISBN: 6991 2016 CP

Author: Nathalie Lebozec

Publication Date: 2016

$20.00

Thus to establish the precision of ISO 20340 Annex A six laboratories participated in a round-robin evaluation of ISO 20340 annex A test method for the first time. The aim was to estimate the repeatability and the reproducibility of this test.

Available for download

Rules of Removal: Chemical Paint Stripping and Historic Masonry

Product Number: 41214-839-SG

Author: Al Morris

Publication Date: 2014

$20.00

In restoration cleaning of historic masonry, you usually know based on contaminants and building fabric what kind of cleaner will be effective on a dirty building. You’ll use one type of restoration cleaner for atmospheric staining, and another for biological soiling. You’ll have an idea, going in, what kind of restoration cleaner to at least try. Not having that kind of information, in my experience, is what makes paint removal from historic – or just old – masonry the most challenging branch of restoration cleaning.

Available for download

Sacrificial Anodes for Reinforced Concrete Structures: A Review

Product Number: 51317--9078-SG

ISBN: 9078 2017 CP

Author: Oladis de Rincon

Publication Date: 2017

$20.00

A review of research work in the literature to date for both laboratory and field evaluations, toward identifying technically relevant situations where the use of sacrificial anodes may or may not be a practical option for reinforcement protection in concrete structures.

Available for download

Safe Handling and Application of Spray Applied Polymeric Thick Film Coatings – What Contractors and Applicators Should Know

Product Number: 41207-316-SG

Author: Edward H. Conrad

Publication Date: 2007

$20.00

Spray applied polyurethane and polyurea coatings, which are based on isocyanates, are widely used in a number of markets today. Several of these applications are in the automotive industry where many of the automotive paints and other coatings in use contain isocyanates. In the last 15 years, the use of isocyanates in the application of a spray applied truck bed liner (TBL) has been growing in popularity.

Available for download

Safe Processing of Naphthenic Acid Opportunity Crudes Using Chemical Inhibition and Online Monitoring

Product Number: 51317--9067-SG

ISBN: 9067 2017 CP

Author: Jake Davies

Publication Date: 2017

$20.00

This paper provides an overview of the risk assessment methodology and how it is applied to assess and monitor the risks in conjunction with a rigorous corrosion monitoring program comprising of multiple ultrasonic sensor placements. Various case studies are presented.

Products tagged with 'Conference Papers'

Association for Materials Protection and Performance