AMPP Store - Oil and Gas

Available for download

NACE SP0116-2022, Multiphase Flow Internal Corrosion Direct Assessment (MP-ICDA) Methodology for Pipelines

Product Number: NACE SP0116-2022

Publication Date: 2022

$109.00

This standard practice outlines a methodology to assess pipeline integrity because of the threat internal corrosion in on- shore and offshore pipelines and other piping systems that normally carry multiphase fluids (gas, water, and oil) termed multiphase flow internal corrosion direct assessment (MP-ICDA). Liquid separators (drips), compressing stations, vessels, and other equipment not related to pipelines are not included in this standard. This standard applies to pipelines, and piping systems both onshore and offshore, containing carbon dioxide (CO₂), hydrogen sulfide (H₂S), oxygen (O₂), and other corrosive species. Additionally, this standard applies to pipelines that continuously contain a liquid phase (water and condensate and/or oil and/or petroleum compounds), a possible solids content of various mineral scales, biofilms, or corrosion product compounds, and a continuous gas phase with fluid conditions that are not specifically covered by NACE SP0110 for wet gas internal corrosion direct assessment (WG-ICDA). Additionally, solids may be included as a phase by itself and may also be included in multiphase flow analysis of fluid streams

Available for download

NACE SP0169-2024, Control of External Corrosion on Underground or Submerged Metallic Piping Systems

Product Number: NACE SP0169-2024

Publication Date: 2024

$109.00

This standard presents methods and practices for achieving effective control of external corrosion on underground or submerged metallic piping systems and is intended for use by corrosion control personnel concerned with piping used for the transport of oil, gas, water, and other fluids. It is applicable to underground structures and piping buried on land, or submerged in water bodies such as lakes, rivers, bayous, and creeks.

Available for download

NACE SP0176-2022, Corrosion Control of Submerged Areas of Permanently Installed Steel Offshore Structures Associated with Petroleum Production

Product Number: NACE SP0176-2022

Publication Date: 2022

$109.00

Offshore structures represent large capital investments. Structures are being placed in offshore areas worldwide and are being designed to withstand forces resulting from hurricanes, arctic storms, tidal currents, earthquakes, and ice floes. Moreover, platform structures are currently being placed in deeper waters and, therefore, have become larger, more complex, and more expensive. Control of corrosion on structures is necessary for the economic development of oil and gas production, to provide safe support for working and living areas, and to avoid potential harm to the environment. Corrosion on offshore structures can be divided into three major areas: the submerged zone, the splash zone, and the atmospheric zone. The submerged zone also includes that portion of the structure below the mudline. For the purposes of this standard, offshore structures are stationary structures (platforms or subsea facilities) that are fixed to the sea floor by gravity, pilings, or mooring cables.

Available for download

NACE SP0185-2024, Extruded Two-Layer Polyolefin Resin Coating Systems with Adhesives for Underground or Submerged Pipe

Product Number: NACE SP0185-2024

Publication Date: 2024

$109.00

This standard practice provides the material characteristics, application methods, and handling, shipping, and installation procedures for polyolefin resin coating systems extruded over adhesives for the prevention of external corrosion of underground or submerged pipelines. This standard applies to both carbon steel (CS) pipe and ductile iron (DI) pipe when the application of extruded external coatings is described. This standard is intended for use by coating applicators, engineers, and pipeline owners as a guide to specifying application parameters.

Available for download

NACE SP0188-2024, Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

Product Number: NACE SP0188-2024

Publication Date: 2024

$109.00

The purpose of this standard is to provide the means of detecting pinholes, flaws, or holidays in a coating system that may result in its premature failure, thereby possibly decreasing the life expectancy of the asset. This standard documents the equipment and the process of using electrical current to identify these holidays in a repeatable and realistic manner for both field and shop coating applications.

Available for download

NACE SP0191-2023, Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

Product Number: NACE SP0191-2023

Publication Date: 2023

$109.00

This standard addresses initial inspection of the tubular goods and accessories prior to coating, surface preparation, coatingapplication,coatinginspection,coupling/connectionmake-up,qualitycontrol,handling,storage,shipping,and marking.

Available for download

NACE SP0192-2023, Monitoring Corrosion in Oil and Gas Production with Iron Counts

Product Number: NACE SP0192-2023

Publication Date: 2023

$109.00

This standard practice describes the use of iron counts as a corrosion-monitoring method and some common problems encountered when using this method. This standard is a guide for those designing corrosion-monitoring programs as well as those carrying out the programs in the field.

Available for download

NACE SP0200-2023, Steel-Cased Pipeline Practices

Product Number: NACE SP0200-2023

Publication Date: 2023

$109.00

The use of cased carrier pipe for pipelines crossing under highways and railroads has been common practice in the industry. The first cased crossings were made using large-diameter pipe. The carrier pipe was mechanically coupled and pushed through the casing, and the coupling or collars were in direct contact with it. When coatings came into general use, isolating spacers were made of hemp rope saturated with pipe-coating enamel. End seals consisting of either concrete or pipe-coating enamel were poured into each end of the casing. The current practice of installing cased carrier pipe has changed only slightly since the beginning of its use. External loading of the carrier pipe has now been eliminated by the installation of heavy-wall casing pipe, and isolating spacers are used to prevent electrical contact between the casing and the carrier pipe. End seals are used to keep electrolyte (e.g., mud, water) out of the annular space between the carrier pipe and casing.

Available for download

NACE SP0205-2021, Design, Fabrication, and Inspection of Tanks for the Storage of Petroleum Refining Alkylation Unit Spent Sulfuric Acid at Ambient Temperatures

Product Number: NACE SP0205-2021

Publication Date: 2021

$109.00

Sulfuric acid (H₂SO₄) is the largest volume commodity chemical in use today.It plays some part in the production ofnearly all manufactured goods. One large use of concentrated sulfuric acid is used as a catalyst for refinery alkylationunits.Intheseunits,C3-C5olefinssuchaspropyleneorbutylenearereactedwithisobutanetoformgasoline-blendingcomponents such as isoheptane and isooctane.These gasoline-blending components are used to boost octane forautomobileandaviationfuels.

Most refineries have an alkylation unit that uses either hydrofluoric acid (HF) or sulfuric acid as the alkylation catalyst.Thisstandarddealswithspentsulfuricacidassociatedwiththesulfuricacidalkylationprocessonly.

Available for download

NACE SP0285-2021, External Corrosion Control of Underground Storage Tank Systems by Cathodic Protection

Product Number: NACE SP0285-2021

Publication Date: 2021

$109.00

This standard presents standard practices for effective control of external corrosion of underground storage tank (UST) systems by cathodic protection (CP). It is intended to be used by corrosion professionals as a guideline to establish minimum requirements for using CP to control external corrosion of metallic UST systems, including those used to contain oil, gas, and water.

Available for download

NACE SP0291-2023, Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

Product Number: NACE SP0291-2023

Publication Date: 2023

$109.00

This standard practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incom- patible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbond- ment) reduces coating effectiveness and results in premature coating failure.

Available for download

NACE SP0304-2023, Design, Installation and Operation of Thermoplastic Liners for Oilfield Pipelines

Product Number: NACE SP0304-2023

Publication Date: 2023

$109.00

Thermoplastic liners are used to protect new and rehabilitated pipelines from internal corrosion in oilfield service. This Standard Practice is intended for use by liner designers and installers, owners of lined pipelines, liner materials suppliers, consultants, and construction and engineering firms engaged in the subject field. It is intended to provide guidance to designers, specifiers, installers, and operators of oilfield pipelines that use thermoplastic liners as a corrosion and/or abrasion mitigation method.

Oil and Gas

Association for Materials Protection and Performance