AMPP Store - Oil and Gas Production

Available for download

NACE SP0291-2023, Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

Product Number: NACE SP0291-2023

Publication Date: 2023

$109.00

This standard practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incom- patible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbond- ment) reduces coating effectiveness and results in premature coating failure.

Available for download

NACE SP0403-2015, Avoiding Caustic Stress Corrosion Cracking of Refinery Equipment and Piping

Product Number: 21102-SG

Publication Date: 2015

$179.00

HISTORICAL DOCUMENT. Designing, fabricating, and/or maintaining carbon steel equipment and piping that is exposed to caustic environments. Incorporates findings of a 1999 survey as they apply to refinery applications.

Available for download

NACE SP0499-2012 "Corrosion Control and Monitoring in Seawater Injection Systems"

Product Number: 21237-SG

Publication Date: 2012

$179.00

HISTORICAL DOCUMENT. For corrosion engineers and others involved in corrosion control of seawater injection systems. Controlling and monitoring for corrosion, bacteria, and water quality. Equipment and practices.

Available for download

NACE SP0572-2007, Design, Installation, Operation, and Maintenance of Impressed Current Deep Anode Beds

Product Number: 21007-SG

Publication Date: 2007

$179.00

HISTORICAL DOCUMENT. Design, installation, operation, and maintenance of deep groundbeds for control of external corrosion of underground or submerged metallic structures by impressed current cathodic protection.

Available for download

NACE SP0575-2022, Internal Cathodic Protection (CP) Systems in Oil-Treating Vessels

Product Number: NACE SP0575-2022

Publication Date: 2022

$109.00

This standard provides a general guide for the application of effective cathodic protection (CP) to all types of oil-treating vessels containing a free water phase (the electrolyte). It is intended to be used by facility owners, contractors, inspectors, vessels equipment specialists, CP system designers, manufacturers, and others concerned with corrosion mitigation by using cathodic protection systems. The procedures in this standard may best be applied under the direction of a corrosion engineer and by persons with experience and knowledge of the design, installation, operation, maintenance, and control of corrosion protection in the oil-treating vessels containing the electrolyte.

Coatings and materials are discussed in this document in conjunction with the cathodic protection design, as the coating is a major factor when designing a cathodic protection system.

Available for download

NACE SP0602-2023, Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

Product Number: NACE SP0602-2023

Publication Date: 2023

$109.00

STABILIZATION NOTICE: This document has been declared “Stabilized” by AMPP Standards Committee (SC) 03 and will no longer be subjected to periodic reviews for currency.

This AMPP standard practice provides the most current technology and industry practices for the use of field-applied coal tar enamel external pipe coating systems. This standard is intended for use by corrosion-control personnel, design engineers, project managers, purchasing personnel, and construction engineers and managers. It is applicable to underground steel pipelines in the oil and gas gathering, distribution, and transmission industries.

Available for download

NACE SP0775-2023, Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Hydrocarbon Operations

Product Number: NACE SP0775-2023

Publication Date: 2023

$109.00

This standard is presented for the use of metallic corrosion coupons in hydrocarbon production and processing facilities, including but not limited to drilling, production, and transportation operations on land, onshore and offshore. Hydrocarbon operations handle fluids including but not limited to oil, water, gas, condensate, and drilling fluids.

Available for download

NACE SP21469-2021, Corrosion Inhibition Selection and Management for Oil and Gas Production

Product Number: SP21469-2021

Publication Date: 2021

$109.00

This NACE Standard Practice aims to provide guidance for selection and application of Corrosion Inhibitors (CI) for upstream oil and gas processes conditions exposed to corrosive environments.

The application of effective Corrosion Inhibitors (CI) in Oil and Gas production is essential to enable long term use of carbon steel in corrosive production environments. These chemical CI products can be applied continuously, or on a Batch (BI) basis. The effectiveness of CIs(products) that are applied has to be assured for the range of conditions associated with the application and for the lifetime of the facility. The assurance is predominantly achieved through laboratory testing. However, field evaluation of CIs can be a significant part of the assurance process.

Available for download

NACE TM0183-2018, Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment

Product Number: 21213-SG

Publication Date: 2018

$109.00

STABILIZATION NOTICE: This document has been declared “Stabilized” by NACE Task Group (TG) 488 under the auspices of Specific Technology Group (STG) 33 and will no longer be subjected to periodic reviews for currency.

Provides manufacturers, applicators, and users of internal pipe coatings with a method of comparing the performance of these coatings.

Available for download

NACE TM0185-2006, Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing

Product Number: 21217-SG

$179.00

HISTORICAL DOCUMENT. Method of comparing the performance of internal pipe coatings by autoclave testing. Comparisons were made under uniform laboratory conditions.

Available for download

NACE TM0186-2016, Holiday Detection of Internal Tubular Coatings of 355 to 760 μm (14 to 30 mils) Dry-Film Thickness

Product Number: 21218-SG

Publication Date: 2016

$179.00

HISTORICAL DOCUMENT. Nondestructive test method for the detection of holidays in polymeric coatings of 250 to 760 µm (10 to 30 mils) in metallic tubular goods used in the oil and gas industry. Apparatus, Procedure, Reporting.

Available for download

NACE TM0186-2023, Holiday Detection of Internal Tubular Coatings of 330 to 760 µm (13 to 30 mils) Dry Film Thickness

Product Number: NACE TM0186-2023

Publication Date: 2023

$109.00

This standard covers internal tubular polymeric coatings on a steel pipe/piping substrate. The standard defines and provides a procedure for the determination of the presence of holidays in a thick-film coating. This test method is based on the current technology and experience of the petroleum production industry This standard is intended for end users, manufacturers, applicators, corrosion engineers, and quality inspectors of internally coated metallic tubular goods.

Oil and Gas Production

Association for Materials Protection and Performance