AMPP Store - Materials Selection and Design

Available for download

SP0407-2018-SG, Format, Content, and Guidelines for Developing a Materials Selection Diagram

Product Number: 21123-SG

ISBN: 1-57590-212-5

Publication Date: 2018

$109.00

This standard practice provides format, content, and other guidelines for developing a materials selection diagram (MSD). An MSD documents the materials selection of new equipment and piping for the refinery, process chemical, power, and other industries. Information is also provided on key issues that arise when materials are selected.

Available for download

SP0407-HD2013-SG, Format, Content, and Guidelines for Developing a Materials Selection Diagram

Product Number: 21123-HD2013

ISBN: 1-57590-212-5

Publication Date: 2013

$179.00

Developing a materials selection diagram (MSD) to document the materials selection of new equipment and piping for the refinery, process chemical, power, and other industries. HISTORICAL DOCUMENT

Available for download

SP0492-2016-SG (formerly RP0492), “Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes"

Product Number: 21056-SG

ISBN: 1-57590-080-7

Publication Date: 2016

$109.00

Sets minimum physical quality and inspection standards for cast sacrificial anodes for offshore pipeline applications. Applicable to half-shell or segmented bracelet-type anodes, only.

Available for download

SP0775-2012-SG (Spanish), “Preparación, Instalación, Análisis, e Interpretación de Cupones de Corrosión en operaciones Petrolíferas”

Product Number: 21185-SG

ISBN: 1-57590-086-6

Publication Date: 2012

$179.00

Se presenta normas para el uso de cupones de corrosión en operaciones de perforación de pozos, producción y transporte de petróleo. Técnicas de preparación y manejo. Ubicación. Análisis e interpretación. English below.

Available for download

SP0775-2013-HD2013-SG "Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations"

Product Number: 21017-HD2013

ISBN: 1-57590-086-6

Publication Date: 2013

$179.00

Uniform, industry-proven methods to monitor corrosion in oil production systems. Preparing, analyzing, and installing corrosion coupons. Corrosion rate calculations and typical data recording form included.

Available for download

SP0775-2018 "Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations"

Product Number: 21017-SG

Publication Date: 2018

$179.00

HISTORICAL DOCUMENT. This standard outlines procedures for preparing, installing, and analyzing metallic corrosion coupons. Factors considered in the interpretation of results obtained from these corrosion coupons are also included for the use of oil and service industry personnel. This standard is maintained by TG 409.

SPECIALTY PACKAGE: NACE/SSPC Joint Surface Preparation Standards Package 2006-2018

Product Number: 21856-SG

$350.00

NACE/SSPC Joint Surface Preparation Standards Package.

SSPC-SP 5/NACE No. 1-2006, White Metal Blast Cleaning

SSPC-SP 10/NACE No. 2-2006, Near-White Metal Blast Cleaning

SSPC-SP 6/NACE No. 3-2006, Commercial Blast Cleaning

SSPC-SP 7/NACE No. 4-2006, Brush-Off Blast Cleaning

SSPC-SP 13/NACE No. 6-2018, Surface Preparation of Concrete

SSPC-SP 14/NACE No. 8-2006, Industrial Blast Cleaning

Available for download

Stress Corrosion Cracking of Austenitic Grade 347 and Duplex Grade 2205 Stainless Steels in Refinery Simulated Media Containing Hydrogen Sulfide and Chloride

Product Number: 51320-14406-SG

Author: K. Ravindranath, B. Al-Wakaa, R. Alazemi, N. Tanoli

Publication Date: 2020

$20.00

Stabilized austenitic stainless steel (SS) grade 347 is used extensively in high-temperature processes in the petroleum refining industry, while duplex SS (DSS) grade 2205 is a relatively newer material in the industry. Though these grades of SSs perform well in refinery process streams, there are incidents of failure of process equipment attributable to stress corrosion cracking (SCC). The paper deals with a study on the cracking susceptibility of SS grade 347 and DSS grade 2205 in refinery simulated process environments containing hydrogen sulfide and chloride. The paper also reports the electrochemical behavior of these SSs in the medium containing hydrogen sulfide and chloride. The electrochemical behavior of the alloys was assessed by cyclic polarization experiments. Slow strain rate test (SSRT) was used to evaluate the susceptibility of the alloys to SCC. The cyclic polarization studies indicate that the H2S – chloride synergism had a pronounced effect on the localized corrosion susceptibility of 347 SS, while the effect was marginal on the alloy DSS 2205. The SCC susceptibility of 347 SS and DSS 2205 is strongly influenced by hydrogen sulfide-chloride synergism. Initiation of corrosion pits and the sulfidation of active pits due to the synergism were the important steps in the initiation of SCC.

Available for download

Surface Treatment to Improve Corrosion Resistance of Pure Titanium

Product Number: 51317--9358-SG

ISBN: 9358 2017 CP

Author: Marco Ormellese

Publication Date: 2017

$20.00

The corrosion behaviors of pure titanium UNS R50250 and UNS R50400 were investigated and compared with electrochemical behavior of Ti-0.2Pd and Ti-0.3Mo-0.8Ni alloys (UNS R52400 and UNS R53400 respectively).

Available for download

Susceptibility of Plasma Nitrided 17-4 PH to Sulphide Stress Cracking in H2S-Containing Environments

Product Number: 51317--9342-SG

ISBN: 9342 2017 CP

Author: Mario Coseglio

Publication Date: 2017

$20.00

The stainless steel 17-4 PH (H1150D) is a cost-effective alloy for oilfield components due to its combination of high strength, toughness, and good corrosion resistance. Plasma nitriding improves the surface strength of the 17-4 PH and this work suggests that the nitrided can the resistance to SSC.

Available for download

Technology for Chemical Cleaning of Industrial Equipment, 2nd Edition

Product Number: 37634-e

ISBN: 978-1-57590-367-5

Author: Wayne W. Frenier

Publication Date: 2018

$148.00

This book presents new developments that have affected the commercial use of chemicals and devices to clean industrial equipment. This second edition will emphasize the mechanisms of important cleaning processes and solvents and will give an overview of the science and technology of the formation and removal of fouling deposits in the industrial equipment environment. It is directed to a general technically trained audience, with emphasis placed on the basic chemical and mechanical principles of industrial cleaning (IC).

Available for download

The Corrosion of Duplex Stainless Steels: A Practical Guide for Engineers

Product Number: 37636-pdf

ISBN: 978-1-57590-459-7

Author: Roger Francis

Publication Date: 2018

$150.00

Since the 1980s, a range of duplex stainless steels (DSSs) has been developed that have higher alloy content, and therefore greater corrosion resistance and strength. The commonly used DSSs have good corrosion resistance in a wide range of environments and excellent resistance to stress corrosion cracking (SCC). Their high strength and hardness also gives them excellent resistance to both erosion corrosion and cavitation. There are also cast versions of many of the duplex compositions and these have seen extensive use for pumps, valves, and other equipment.

Materials Selection and Design

Association for Materials Protection and Performance