AMPP Store - Materials Selection and Design

Available for download

99417 OVERVIEW OF NACE INTERNATIONAL STANDARD RP0472

Product Number: 51300-99417-SG

ISBN: 99417 1999 CP

Author: Cathleen Shargay

$20.00

Available for download

99419 PAST, PRESENT & FUTURE OF NACE INTERNATIONAL REPORT 8X194

Product Number: 51300-99419-SG

ISBN: 99419 1999 CP

Author: T.T. Phillips

$20.00

Available for download

99473 IN SITU CORROSION STUDIES ON CANDIDATE CONTAINER MATERIALS FOR THE UNDERGROUND DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTE IN BOOM CLAY

Product Number: 51300-99473-SG

ISBN: 99473 1999 CP

Author: Bruno Kursten and Pierre Van Iseghem

$20.00

Available for download

A Study on the Microstructure Mechanical Properties and Corrosion Resistance of Centrifugally Cast Heavy Wall Thickness Low Carbon 46Ni-35Cr-9Mo Alloy

Product Number: 51317--9349-SG

ISBN: 9349 2017 CP

Author: Shankar Venkataraman

Publication Date: 2017

$20.00

The low carbon 46Ni-35Cr-9Mo alloy is a solid solution strengthened cast Ni-Cr-Mo alloy additionally containing Cu and N. This work reports on the properties achievable for a centrifugally cast low carbon 46Ni-35Cr-9Mo alloy tube of 4500 mm length and 55 mm wall thickness.

Available for download

Accelerated Corrosion of 2304 Duplex Stainless Steel by Marine Pseudomonas Aeruginosa Biofilm

Product Number: 51317--9326-SG

ISBN: 9326 2017 CP

Author: Dake Xu

Publication Date: 2017

$20.00

The 2304 duplex stainless steel is an alternative to 316L SS in marine applications, while its MIC behavior is barely known. Surface analysis and electrochemical techniques were used to study the corrosion behavior of 2304 DSS caused by the marine aerobe Pseudomonas aeruginosa.

Available for download

Advances in Biomedical Corrosion

Product Number: 37688-PDF

ISBN: 978-1-57590-489-4

$145.00

Advances in Biomedical Corrosion: New Trends, Challenges, and Solutions encompasses just over 10 years of research into the interplay between corrosion and biomedical materials, based on technical papers by experts in the field.

While the range of biomedical materials is impressive--spanning metals, alloys, ceramics, and polymers--this title focuses on metals and alloys.

The book covers corrosion topics and technologies ranging nanomaterials for biomedical coatings to additive manufacutring for hip and knee replacements to the potentials of various alloys.

2023 AMPP e-book, 126 pages, color

Available for download

Air Balancing is More Than a Building Science

Product Number: 41214-858-SG

Author: David Simkins

Publication Date: 2014

$20.00

This paper will discuss utilizing temporary dehumidification and climate control equipment to reduce corrosion levels during the installation of coatings and linings applications; the science of Psychrometrics, the science behind dehumidification, and discuss how the components interact on a coatings project.

Available for download

AMPP SP21466-2024, Materials Sustainability Framework Based on Corrosion Management System

Product Number: AMPP SP21466-2024

Publication Date: 2024

$109.00

This standard aims to provide a framework for users and their respective organizations in assessing both the material sustainability and material stewardship of their operations using recognized industrial methods, resources, and practices built on the corrosion management framework. Some of these methods, resources, and practices are already covered in the corrosion management system framework; however, some are expanded upon within this standard using a material sustainability maturity model beyond the corrosion management framework. Therefore, this standard aims to empower material and corrosion professionals to better deliver value from a life cycle and circular economy standpoint while leveraging existing and emerging tools to support assets, operations, enterprises, stakeholders, and communities through the value chain.

Available for download

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, 2nd edition (e-book)

Product Number: 37619-E

ISBN: 978-1-57590-338-5

Author: Ali Morshed

Publication Date: 2016

$130.00

For integrity engineers/managers, students, etc. Asset corrosion management discipline & its applications. Process. Products. Shortcomings. Cost savings. Real-case scenarios of oil and gas assets. 2016 NACE E-BOOK

Available for download

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

Product Number: ANSI-NACE MR0103-2023

Publication Date: 2023

$180.00

Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.

Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.

This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.

Available for download

ANSI/NACE MR0103-2015/ISO 17945-2015, “Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments”

Product Number: 21305-SG

Publication Date: 2015

$180.00

HISTORICAL DOCUMENT. Material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments (i.e., environments that contain wet hydrogen sulfide [H2S]). AKA "wet H2S cracking".

CORRECTION OF PUBLICATION:

In January 2016, NACE published an incorrect version of ANSI/NACE MR0103/ISO 17945:2015 (Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments). That document was incorrectly titled ANSI/NACE MR0103/ISO 17495:2016. The erroneous standard was retracted at the time and the NACE Store has the corrected version. NOTE: The contents of both versions of the standard are identical. The only discrepancies are in the title.

Available for download

ANSI/NACE MR0175/ISO 15156-2 Technical Circular 3 (2019)

Product Number: 15156-2-SG2019

Publication Date: 2019

$0.00

International Standard ISO 15156-2:2015 Technical Circular 3-Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production, Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

Materials Selection and Design

Association for Materials Protection and Performance