Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.
During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.
Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!
Fe-Cr-Ni alloys such as alloys 600 625 690 and 800 are used in steam generator tubing of nuclear power reactors. Precipitation of impurities on the steam generator tubing can lead to fouling and formation of deposits yielding a partially occluded metal surface. In this work the crevice corrosion susceptibility of these alloys is analyzed.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Error Message:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
Carbon Capture and Storage (CCS). The CO2 stream, captured from power plants contains highly corrosive impurities including H2O vapor, oxygen, and hydrogen sulfide. This paper presents our study on corrosion of pipeline steel in sc-CO2 containing H2O, H2S and/or O2 impurities in an autoclave.
Supercritical water-cooled reactor (SCWR) is an innovative Generation IV nuclear reactor. Nickel-based alloys, such as UNS N06625, UNS R20033 and UNS N07214 alloys, are selected for the fuel cladding. Knowledge gaps exist as regards their use for the fuel cladding in the SCWR. This paper introduces laboratory results on corrosion and stress corrosion cracking (SCC) of the nickel-based alloys.
This paper will provide an overview of activities related to the nondestructive examination of dry storage casks for spent nuclear fuel. The aim is to help ensure their integrity over extended interim storage periods.
Discussion on Transmission and Distribution (T&D) structures and system-wide cathodic protection as a mitigation technique. In general soil, corrosivity, lack of cathodic protection/coating, stray current AC interference and copper grounding should be considered in design of T&D structures.
Exhaustive testing has been conducted and reported previously on UNS N06055 in corrosion 2014 paper number 4223. These data support the use of UNS N06055 for nuclear applications where resistance-to-cracking during fabrication and resistance to primary water stress corrosion cracking (PWSCC) in service are of paramount importance.
Due to the elevated temperatures and chemical composition of hydrothermal fluids, service conditions in geothermal facilities can be extreme in terms of corrosion. This evaluation of corrosion behavior of duplex steel S31803 (318LN, X2CrNiMoN22-5-3, 1.4462) was conducted by electrochemical measurements and exposure tests.
Due to the composition of heat transmission media and temperatures, service conditions in solar facilities are, in many cases, extreme in terms of corrosion. By electrochemical measurements and exposure tests, the suitability of two alloys - X8NiCrSi38-18() and NiCr25FeAlYB - in molten nitrate salt (60 % NaNO3/40 % KNO3) was characterized at 600 °C.
This paper details a comprehensive AC interference analysis and implementation of an extensive AC corrosion mitigation and monitoring system for a 100-mile (328 kilometer) portion of a regulated pipeline.
Requirements for corrosion protection for new large offshore wind farms are extended to 25 years’ maintenance-free service lifetime. Therefore, ISO 12944 is being updated. To bring down construction cost for offshore wind, initiatives have been taken to industrialize the coating application process and use standard components.
Nuclear steam generators (SG) are subject to the accumulation of corrosion product deposits on heated tube surfaces and other internal components. In the past 15 years, processes to periodically remove only a fraction of the deposit inventory have been developed that save time, money and effort.
Transmission substation structure component design / construction and corrosion risk factors, details on inspection findings / evaluations and mitigating actions, recommended actions for future integrity assessments, and recommended structure design and surveillance practices to optimize lessons learned.