AMPP Store - Chemicals

Available for download

NACE No. 10/SSPC-PA 6-2023, Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks

Product Number: NACE No. 10-SSPC-PA 6-2023

Publication Date: 2023

$109.00

Fiberglass-reinforced plastic (FRP) linings are used worldwide to prevent the corrosion and deterioration of storage tank bottoms in petroleum, petrochemical, and other services. Experience has shown that the useful life of an FRP lining may exceed 25 years. API Standard 653 permits a minimum remaining thickness of the tank bottom plate to be 1.25 mm (0.050 in) when lined with FRP compared to a thickness of 2.5 mm (0.10 in) if unlined or lined with a nonreinforced coating system and not equipped with a tank bottom leak detection system.

Available for download

NACE Publication 5A171-1995, Materials for Receiving, Handling, and Storing Hydrofluoric Acid

Product Number: 24057-1995

Publication Date: 1995

$179.00

HISTORICAL DOCUMENT. Aqueous hydrofluoric acid (HF) is commercially available in 48% and 70% solutions. Commercial anhydrous hydrogen fluoride (AHF) contains less than 400 parts per million by weight (<400 wt ppm) water. Although this report is intended as a guide for handling commercial HF and AHF, additional information is given to aid users of HF who encounter other concentrations.

Available for download

NACE SP0205-2021, Design, Fabrication, and Inspection of Tanks for the Storage of Petroleum Refining Alkylation Unit Spent Sulfuric Acid at Ambient Temperatures

Product Number: NACE SP0205-2021

Publication Date: 2021

$109.00

Sulfuric acid (H₂SO₄) is the largest volume commodity chemical in use today.It plays some part in the production ofnearly all manufactured goods. One large use of concentrated sulfuric acid is used as a catalyst for refinery alkylationunits.Intheseunits,C3-C5olefinssuchaspropyleneorbutylenearereactedwithisobutanetoformgasoline-blendingcomponents such as isoheptane and isooctane.These gasoline-blending components are used to boost octane forautomobileandaviationfuels.

Most refineries have an alkylation unit that uses either hydrofluoric acid (HF) or sulfuric acid as the alkylation catalyst.Thisstandarddealswithspentsulfuricacidassociatedwiththesulfuricacidalkylationprocessonly.

Available for download

NACE SP0295-2022, Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

Product Number: NACE SP0295-2022

Publication Date: 2022

$109.00

This standard practice has been prepared for the rail tank car industry to address the need for high-quality application of coatings to the interior surfaces of rail tank cars carrying a variety of chemicals at various temperatures. Qualified inspection of the completed coating system and testing with the use of adequate, readily available instruments also are covered.

Coating manufacturers, coating applicators, and those who have contracting authority for rail tank car internal coating instllation should be able to use this standard to ascertain the procedures, facilities, equipment, and personnel needed to satisfy the requirements for coating systems for rail tank cars in chemical service.

Available for download

NACE SP21469-2021, Corrosion Inhibition Selection and Management for Oil and Gas Production

Product Number: SP21469-2021

Publication Date: 2021

$109.00

This NACE Standard Practice aims to provide guidance for selection and application of Corrosion Inhibitors (CI) for upstream oil and gas processes conditions exposed to corrosive environments.

The application of effective Corrosion Inhibitors (CI) in Oil and Gas production is essential to enable long term use of carbon steel in corrosive production environments. These chemical CI products can be applied continuously, or on a Batch (BI) basis. The effectiveness of CIs(products) that are applied has to be assured for the range of conditions associated with the application and for the lifetime of the facility. The assurance is predominantly achieved through laboratory testing. However, field evaluation of CIs can be a significant part of the assurance process.

Available for download

NACE TM21423-2023, Determination of Substrate and Surface Temperature Limits for Insulative Coatings Used for Personnel Protection

Product Number: NACE TM21423-2023

Publication Date: 2023

$109.00

The purpose of this AMPP test method is to standardize the testing methods and conditions used to determine the substrate and surface temperature limits for different thicknesses of insulative coatings used for personnel protection to be in compliance with ASTM C1055. The temperature limits determined when using this test method are specific for each coating tested at a particular thickness and substrate temperature. A standardized test method can validate the temperature limits of a coating used for personnel protection and enable direct comparison of its performance to other commercially available coatings. This test method is intended for use by facility owners, engineers, health and safety specialists, coatings manufacturers, and other interested parties.

Available for download

NACE TR5A171-2022, Materials for Storing and Handling Commercial Grades of Aqueous Hydrofluoric Acid and Anhydrous Hydrogen Fluoride

Product Number: NACE TR5A171-2022

Publication Date: 2022

$109.00

Note: This document was originally published with errors in Table B1 , page 26. These identified errors are corrected. Errata sheet is included.

This technical report presents general information on materials commonly used for storing and handling commercial grades of aqueous hydrofluoric acid (AqHF) and anhydrous hydrogen fluoride (AHF). Some materials generally avoided are also discussed. This report is intended for end users, designers, and suppliers of equipment for use with AqHF and AHF. These include, among others, workers in process industry plants, engineering and construction designers, and suppliers of equipment such as pumps, valves, and hoses. This information is useful for initial design and for cost estimates of equipment to handle most commercial AqHF and AHF. The report addresses AqHF and AHF purchased to normal commercial quality that do not contain impurities liable to affect their inherent corrosion characteristics. Testing in the service environment typically indicates a material’s suitability for use with AqHF and AHF. This report does not include all materials that might be resistant and is not intended to limit the consideration and testing of other materials.

Available for download

Peabody's Control of Pipeline Corrosion, 3rd Edition (E-Book)

Product Number: 37617-E

ISBN: 978-1-57590-336-1

Author: by A.W. Peabody, edited by Ronald Bianchetti

Publication Date: 2018

$150.00

NEW EDITION!! For nearly 50 years Control of Pipeline Corrosion, written by A.W. Peabody, has been the most trusted resource in the field of pipeline corrosion. Now completely revised and updated, the third edition of this classic reference continues the tradition of excellence by providing the most thorough and authoritative coverage of the prevention and control of pipeline corrosion, and now includes a chapter on AC interference.

Peabody's Control of Pipeline Corrosion, Third Edition, edited by Ronald Bianchetti, blends traditional corrosion engineering practices with modern technologies to make this the single source for corrosion control. Chapters have updated information and graphics to expand on the user-friendly nature of the original book.

2018 NACE E-Book.

Available for download

REACH and Its Grasp on the Protective Coatings Industry

Product Number: 41213-778-SG

Author: Heather Ramsey, Heather Stiner

Publication Date: 2013

$20.00

The European regulation known as REACH has completely revamped the way U.S. companies export into the European market. On June 1, 2007 the REACH legislation was accepted into law and is applicable to 27 EU members and 3 non-EU members. In order for the U.S. to be able to sell protective coatings to these countries the companies must comply with the REACH legislation.

Available for download

SP0472-2015 "Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments"

Product Number: 21006-SG

ISBN: 1-57590-114-5

Publication Date: 2015

$179.00

HISTORICAL DOCUMENT. Guidelines to prevent environmental cracking of weldments in carbon steel refinery equipment and piping. Welding processes: SMAW, GMAW, FCAW, GTAW and SAW.

Available for download

SSPC-Paint 16-2023, Coal-Tar Epoxy Polyamide (Black or Dark Red) Coating

Product Number: SSPC-Paint 16-2023

Publication Date: 2023

$109.00

This coating material standard is intended primarily for use by coating manufacturers, specifiers, and applicators. It contains requirements for the formulation of the coating material as well as requirements for material properties of the formulated coating and instructions for proper application of the coating. The coating is intended for use in environments that are not exposed to ultraviolet light. Its use may be restricted in some areas due to its coal tar content.

Available for download

SSPC-Paint 32-2015, Coal Tar Emulsion Coating

Product Number: SSPC-Paint 32-2015

Publication Date: 2015

$179.00

HISTORICAL DOCUMENT.

Chemicals

Association for Materials Protection and Performance