AMPP Store - Cathodic Protection

Available for download

NACE TM0115-2022, Cathodic Disbondment Test for Coated Steel Structures Under Cathodic Protection

Product Number: NACE TM0115-2022

Publication Date: 2022

$109.00

REAFFIRMATION. This AMPP standard test method specifies procedures to evaluate cathodic disbondment resistance of the steel structure coating systems under cathodic protection, such as buried or submerged pipeline and tank linings. The standard covers all test specimen geometries and test temperatures. This standard also takes into consideration all test parameters with the goal of the standard to be used during the selection of protective coating systems for use under cathodic protection. This test method is intended for use by facility owners, coating applicators, and coating manufacturers.

Available for download

NACE TM0190-2017, Impressed Current Laboratory Testing of Aluminum and Zinc Alloy Anodes

Product Number: 21221-SG

Publication Date: 2017

$179.00

HISTORICAL DOCUMENT. Determining the potential and current capacity characteristics under laboratory conditions for aluminum and zinc alloy anodes used for cathodic protection.

Available for download

NACE TM0190-2022, Impressed Current Laboratory Testing of Aluminum and Zinc Alloy Anodes

Product Number: NACE TM0190-2022

Publication Date: 2022

$109.00

Note: This document was originally published with an error in Section 3, Figure 3, page 8. These identified errors are corrected. The Errata sheet is included.

This standard test method describes a quality assurance procedure for determining the potential and current capacity characteristics under laboratory conditions for aluminum and zinc alloy anodes used for cathodic protection (CP). Field performance of anodes should be evaluated to correspond to actual anode performance.

This standard is intended primarily for users, designers, and manufacturers involved with the application of CP in marine environments. This standard can be used by manufacturers and users of aluminum and zinc anodes for quality control verification. The most common usage is expected to be by manufacturers to meet quality control requirements requested by the purchasing user.

Available for download

NACE-ASTM G193-2022, Standard Terminology and Acronyms Relating to Corrosion

Product Number: G193-2022

Publication Date: 2022

$82.00

This joint NACE/ASTM standard defines commonly used terms in the field of corrosion as agreed by a joint NACE/ASTM committee. It includes words and acronyms for corrosion-related expressions.

Available for download

NACE-PODS SP0507-2014, "External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX)"

Product Number: 21124-SG

ISBN: 1-57590-213-3

Publication Date: 2014

$179.00

HISTORICAL DOCUMENT. External corrosion direct assessment (ECDA) data structure enables integration of data and standardized reporting. Allows transfer between different software or computer systems.

Available for download

NACE-PODS SP0507-2021, External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX)

Product Number: NACE SP0507-2021

Publication Date: 2021

$109.00

The objective of this standard practice is the development of a new external corrosion direct assessment (ECDA) data interchange data structure that will enable electronic integration of data and standardize reporting of ECDA data asso- ciated with indirect inspection data within the pipeline industry, to allow transfer between different software packages or computer systems. This is expected to minimize difficulty in using various programs to analyze or graph data and allow for comparison of data gathered for a given pipeline segment at different times, regardless of the software system used to collect it.

Available for download

Optimization of Corrosion Inhibitor Application Using Modular Automated Corrosion Control Centers

Product Number: 41206-278-SG

Author: Wayne Powell

Publication Date: 2006

$20.00

In the 1990s, military assets transported shipboard to overseas locations by the U.S. Army arrived at their destinations already corroded due to saltwater. In response to this problem, U.S. Army Tank-automotive and Armaments Command (TACOM) began manually applying spray-on corrosion inhibitor (CI) to assets prior to transportation and realized a significant reduction in corrosion. However, due to an increase in the volume of military assets being transported overseas, manual application of CI soon proved too time-consuming and costly.

Available for download

Penetration of Cathodic Protection into Pipeline Coating Disbondment

Product Number: 51317--9146-SG

ISBN: 9146 2017 CP

Author: Li Yan

Publication Date: 2017

$20.00

An experimental setup was designed to investigate the cathodic protection (CP) penetration into coating disbondment. Embedded detection probes underneath the disbondment enabled pH and steel potential measurements without disturbing the environment inside the disbondment.

Potential Theory Applied to Cathodic Protection Design, 2nd Edition

Product Number: 37694-POD

ISBN: 978-1-57590-495-5

Author: Rogelio de las Casas, Ronald Bianchetti

Publication Date: 2024

$155.00

NEW! The first edition of Potential Theory Applied to Cathodic Protection Design showcases the mathematical development of analytical equations for the design of cathodic protection (CP) systems for underground structures with anode groundbeds having various configurations. Equations include calculations for the resistance and voltage (potential) to assist the CP design engineer.

This second edition has several important changes including updates on integral and analytic solutions for horizontal anodes in the same trench, an approach that was insufficiently developed in the first edition.

Also new for the second edition is an index for enhanced reader experience.

Other updates include:

•Generalization of groundbed resistance combining the equation for anodes with different length and depth, with the equation for different distance between anodes.

•Calculation of anode’s current in a groundbed, based on the crowding factor.

•Generalization of groundbed resistance combining the equation for anodes with different length and depth, with the equation for different distance between anodes.

•Calculation of anode’s current in a groundbed, based on the crowding factor.

•By means of the use of integral formulations, particularizes the use of the APM for any combination of underground anode systems.

2024 AMPP

Available for download

Recent Failures Of Accelerated High Temperature Sulfidation Corrosion In The Oil Refining Industry

Product Number: 51321-16738-SG

Author: Hyungjin Lee, Hyeonsu Chae, Junmo Yang, Jaeseung Kim, Taehyung Kim, Taehyun Choi, Sungsu Cho, Moonyoung Lee, Homin Yun Jongun Lee, Hyeongkeun Choi, Gyutae Park, Hyunjoon Park, Seongyong Jang, Sunhyuk Bae, Jaewoong Kim

Publication Date: 2021

$20.00

High temperature sulfidation is one of the oldest damage mechanisms in the refining process such as crude distillation unit, vacuum distillation unit and hydroprocessing unit. Since corrosion proceeds to general corrosion and occurs in a high temperature environment, it is a type of corrosion that can lead to a large fire explosion when a leak occurs.

Available for download

Researches on AC Corrosion Risk Assessment Criteria for Cathodically Protected Carbon Steel

Product Number: 51317--8962-SG

ISBN: 8962 2017 CP

Author: Yanxia Du

Publication Date: 2017

$20.00

Experiments to study the effects of AC interference on cathodic protection (CP). Changes of CP potential and current density under AC interference and AC corrosion rates obtained. Effective CP potential under AC interference analyzed. Interference compared.

Available for download

Retrofit and Management of Water Pipelines with Cathodic Protection: Case Studies

Product Number: 51317--9089-SG

ISBN: 9089 2017 CP

Author: Mersedeh Akhoondan

Publication Date: 2017

$20.00

Corrosion of metallic pipelines is a significant source of failures to drinking water utilities. Cathodic Protection has been used for buried metallic pipelines for decades but not widely used in the water industry. Preliminary findings of the on-going Water Research Foundation project.

Cathodic Protection

Association for Materials Protection and Performance