AMPP Store - AMPP Standards

Available for download

AMPP TM21449-2021, Continuous Measurements for Determination of Aerospace Coating Protective Properties

Product Number: AMPP TM21449-2021

Publication Date: 2021

$109.00

The purpose of this standard Test Method is to provide guidance on the testing and evaluation of coatings for aerospace applications. This Test Method has been developed for use by researchers, manufacturers, and organizations responsible for the manufacture, specification, and use of corrosion protective coatings for aerospace structures. The Test Method details measurement techniques to continuously monitor the combined environmental and mechanical effects that drive coating degradation in laboratory tests. While for many industries, judgements of coating performance may be primarily aesthetic, this Test Method describes direct, continuous measurements of coating degradation processes that are important to aircraft structural integrity.

Available for download

AMPP TM21451-2023, Evaluation of Carbon and Low-Alloy Steels for Resistance to Stress-Oriented Hydrogen-Induced Cracking (SOHIC)

Product Number: AMPP TM21451-2023

Publication Date: 2023

$109.00

Carbon and low-alloy steels in plate form and their welded products may be susceptible to one or more forms of environmental cracking when exposed to wet H₂S service conditions. These include, for example, (1) sulfide stress cracking (SSC) of hard zones and welds; (2) hydrogen-induced cracking (HIC) in the parent metal; and (3) stress-oriented hydrogen-induced cracking (SOHIC) in the region adjacent to welds of nominally acceptable hardness. Extensive work has been conducted over many years to understand various fundamental and applied aspects of these phenomena. Experiences in refinery wet H₂S operations have directed particular attention to understanding SOHIC and the various metallurgical and environmental parameters that govern its occurrence.

Scope

This standard was prepared to provide a test method for consistent evaluation of pipeline and pressure vessel steels to SOHIC caused by hydrogen absorption from aqueous sulfide corrosion. The test conditions are not designed to simulate any specific service environment. The test is intended to evaluate resistance to SOHIC only, and not to other adverse effects of sour environments such as sulfide stress cracking (SSC), pitting, or mass loss from corrosion.

Available for download

AMPP TM21453-2023, Laboratory Testing for Resistance to Environmentally-Assisted Hydrogen Stress Cracking in Welds

Product Number: AMPP TM21453-2023

Publication Date: 2023

$109.00

This standard covers the testing of welds subjected to tensile stresses for resistance to cracking in aqueous environments containing a source of hydrogen charging. Carbon and low alloy steels and their matching welds are commonly tested for EAC resistance at room temperature where susceptibility is typically high. For other types of alloys, the correlation of EAC susceptibility with temperature is more complicated. For example, dissimilar welds of nickel alloy on carbon or low alloy steel have shown susceptibility at low, seabed temperatures (4 °C [39 °F]). Matching welds made on duplex stainless steels have shown similar susceptibility (DNV RP-F112).

Available for download

AMPP TM21465-2024, Molecular Microbiological Methods - Sample Handling and Laboratory Processing

Product Number: AMPP TM21465-2024

Publication Date: 2024

$109.00

This standard is applicable to operators, service companies, third-party laboratories, consultants, and universities that perform molecular techniques to identify microorganisms in industrial settings, including microorganisms involved in microbiologically influenced corrosion (MIC), biogenic production of hydrogen sulfide (a process also known as souring), and biofouling in industrial settings and organizations that manage assets affected by corrosion threats. This standard should be used to select appropriate procedures for sample collection, preservation, laboratory processing, and data analysis.

Available for download

AMPP TM21476-2024, Methods for Calculation of Bulk Solution pH Value in Brines Containing Acid Gases and Organic Acids

Product Number: AMPP TM21476-2024

Publication Date: 2024

$109.00

This test method includes the procedure for pH value determination, the data required to be collected, the proposed methods and requirements of data collection, and the calculation method. The factors taken into consideration include corrosive gas, ions in the water, temperature, and pressure. The effect of oxygen is excluded.

Available for download

AMPP TM21510-2022, Potentiodynamic Scans: Material Preparation, Data Acquisition and Analysis

Product Number: AMPP TM21510-2022

Publication Date: 2022

$109.00

This standard provides a method for collecting reproducible potentiodynamic data, enabling the comparison of data across various experiments and laboratories. This method is intended for those with experience in potentiodynamic data collection across all of industry and academia. This method has been adapted from Appendix B of MIL-STD-889. Users interested in submitting data for acceptance into MIL-STD-889 shall refer to the latest version of MIL-STD-889

Available for download

AMPP TM21549-2024, Test Method for Assessing the Impact of an Insulation Material on Corrosion Under Insulation

Product Number: AMPP TM21549-2024

Publication Date: 2024

$109.00

This AMPP standard test method provides a comprehensive methodology to evaluate the relative performance of insulation materials in accelerated and simulated field conditions on bare metal substrates. This test method is intended for use by corrosion control personnel, design engineers, project managers, purchasing personnel, and construction engineers and managers. It is applicable to insulated piping and equipment in industrial applications such as oil and gas gathering, distribution, transmission and refining, power generation, mining, and chemical industries.

Available for download

AMPP TM21606-2024, Weight Percent Solids in High Solids Coatings for the Maritime Industry

Product Number: AMPP TM21606-2024

Publication Date: 2024

$109.00

With an increasing use of ultra-high solids (UHS) and solvent-free (SF) coatings, a standardized and verified test method to provide reliable results in a practical manner is needed to measure and determine the total weight solids in coatings.

This AMPP test method aims to provide a precise and practical method to determine weight percent solids in high solids coatings.

This test method applies to coatings used during the building, operation, and maintenance of ships and maritime installations.

Available for download

AMPP TM21612-2022, Liquid-Applied Coating Performance Test Methods for Offshore Structures

Product Number: AMPP TM21612-2022

Publication Date: 2022

$109.00

This AMPP standard provides a series of effective and economical test methods to evaluate the performance of candidate offshore platform new construction and maintenance coatings. The testing protocol is established to simulate the offshore environment and based on the major failure modes observed on offshore platforms. The test results will rank the candidate coating systems for end-users to select and coating manufacturers to develop reliable coating systems.

Available for download

AMPP TR21448-2021, Corrosion Prevention and Control for Marine Scrubbers

Product Number: AMPP TR21448-2021

Publication Date: 2021

$109.00

This Technical Report provides sound technical information on the corrosion risk of exhaust gas scrubbers to ship owners, shipyards, marine engineers, scrubber designers and suppliers. Marine scrubbers used on ships are mainly wet scrubbers, which are open-loop, closed-loop, or hybrid types. Each system is discussed with respect to a description of each type of scrubber, washwater environments, materials of construction (metals and non-metals), pitfalls of inspection, fabrication, and welding of metals, service performance and applications history including descriptions of corrosion failures and successes, and repair and maintenance guidance.

Available for download

AMPP TR21473-2024, In-Situ Coating of Steel Pipelines via Pigging

Product Number: AMPP TR21473-2024

Publication Date: 2024

$109.00

This report provides the most current technology and industry practices for the internal in-situ cleaning and coating application in an existing steel pipeline. This report presents general practices and preferences in regard to the cleaning, surface preparation, drying, and the application of a coating in a steel pipeline by the pig (scraper) batching method. It is applicable to onshore or offshore steel pipelines in all industries including the oil and gas gathering, distribution, and transmission industries. It is also applicable to welded steel water and brine handling pipelines.

Available for download

AMPP TR21478-2023, 3D Optical Imaging Techniques

Product Number: AMPP TR21478-2023

Publication Date: 2023

$109.00

3D corrosion measurement techniques described in this report can be performed in the field, laboratory, plant environment, or other related facilities. Corrosion measurements are obtained under widely varying field conditions and plant environments. This report provides the user with the background needed to make testing decisions in the field or laboratory based on the technical facts available at the time of publication.

This technical report provides descriptions of the corrosion pitting measurement techniques used on underground and aboveground piping, tanks, and vessels using 3D optical imaging tools. This report includes those corrosion measurement techniques that relate to the ASME B31.8, API 579, or special conditions in NACE SP0502

AMPP Standards

Association for Materials Protection and Performance