Menu
Search
Filters
Close
Menu

RP0173-1973, Collection and Identification of Corrosion Products

Picture for RP0173-Collection and Identification of Corrosion Products-HD 1973
Available for download

This recommended practice provides guidelines which are applicable to most situations in which corrosion products are to be collected and analyzed. Historical document 1973

Product Number: 53014-HD1973
Author: NACE
Publication Date: 1973
Industry: Science of Corrosion
$179.00
$179.00
$179.00

1.1 This recommended practice provides guidelines which are applicable to most situations in which corrosion products are to be collected and analyzed. Because the person collecting a sample of corrosion products in the field may have had no previous experience in handling corrosion problems, this standard explains the procedures that should be followed in order to provide the laboratory with valid samples whose examination and analysis can contribute to the solution of the corrosion problem.

1.2 Because most analyses of corrosion products are conducted in the laboratory and not by the person collecting the corrosion product samples in the field, this standard describes some of the analysis and identification procedures to guide the engineer in his discussions with the analyst in the laboratory.

1.3 If the corrosion problem encountered is new or unusual, it is strongly recommended that before any samples are taken, the laboratory that will perform the identification or analysis be contacted for any special instructions that may be applicable to the particular corrosion problem.

1.4 Corrosion products can in certain cases cause injury by contact with skin and eyes, inhalation of dusts or released vapors, radiation exposure, etc., so that appropriate precautions are necessary both in sampling and subsequent handling by analytical personnel. Those samples of corrosion products either known or suspected of containing harmful substances should be suitably identified to reduce risk of injury. Certain corrosion products are pyrophoric in nature and will release heat or burst into flame in contact with air. This not only can be a safety problem but can cause change in chemical composition leading to improper interpretation of analytical results.   Historical document 1973

1.1 This recommended practice provides guidelines which are applicable to most situations in which corrosion products are to be collected and analyzed. Because the person collecting a sample of corrosion products in the field may have had no previous experience in handling corrosion problems, this standard explains the procedures that should be followed in order to provide the laboratory with valid samples whose examination and analysis can contribute to the solution of the corrosion problem.

1.2 Because most analyses of corrosion products are conducted in the laboratory and not by the person collecting the corrosion product samples in the field, this standard describes some of the analysis and identification procedures to guide the engineer in his discussions with the analyst in the laboratory.

1.3 If the corrosion problem encountered is new or unusual, it is strongly recommended that before any samples are taken, the laboratory that will perform the identification or analysis be contacted for any special instructions that may be applicable to the particular corrosion problem.

1.4 Corrosion products can in certain cases cause injury by contact with skin and eyes, inhalation of dusts or released vapors, radiation exposure, etc., so that appropriate precautions are necessary both in sampling and subsequent handling by analytical personnel. Those samples of corrosion products either known or suspected of containing harmful substances should be suitably identified to reduce risk of injury. Certain corrosion products are pyrophoric in nature and will release heat or burst into flame in contact with air. This not only can be a safety problem but can cause change in chemical composition leading to improper interpretation of analytical results.   Historical document 1973

Product tags
Also Purchased
Picture for RP0170 - Protection of Austenitic Stainless Steel From Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment-HD1985
Available for download

RP0170-1985 - Protection of Austenitic Stainless Steel From Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment-HD1985

Product Number: 21002-HD1985
Author: NACE
Publication Date: 1983
$179.00

Methods to protect austenitic stainless steel from polythionic acid stress corrosion cracking (SCC) found to occur during downtimes and contiguous shutdown and start-up periods.  Historical Document 1986
Picture for RP0170 - Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking during Shutdown of Refinery Equipment-HD1993
Available for download

RP0170-1993- Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking during Shutdown of Refinery Equipment-HD1993

Product Number: 21002-HD1993
Author: NACE
Publication Date: 1993
$179.00

Methods to protect austenitic stainless steel and other austenitic alloys from polythionic acid stress corrosion cracking (SCC) occurring during downtimes and contiguous shutdown and start-up periods. Historical Document 1993
Picture for RP0170 - Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking during Shutdown of Refinery Equipment-HD1997
Available for download

RP0170-1997 - Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking during Shutdown of Refinery Equipment-HD1997

Product Number: 21002-HD1997
ISBN: 1-57590-039-4
Author: NACE International
Publication Date: 1997
$179.00

Methods to protect austenitic stainless steel and other austenitic alloys from polythionic acid stress corrosion cracking (SCC) occurring during downtimes and contiguous shutdown and start-up periods. Historical Document 1997
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support