Save 20% on select titles with code HIDDEN24 - Shop The Sale Now
Currently, a number of fracture mechanics-based methods are available for crack assessment. In this paper, a critical review is given to failure assessment diagram (FAD), in particular the API 579-2000 fracture mechanics assessment method for crack-like flaws. Illustrations, arranged by applicability to field examples, demonstrate the approach.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Error Message:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
This paper describes a series of tests on two grades of stainless steels UNS S31600 (AISI 316) and UNS S66286 (ASTM A453 Gr. 660– Alloy A286) in simulated H2S-contining oil and gas service environments. The purpose of this study was to evaluate these materials for stress corrosion cracking.
This paper documents the basic SCC and corrosion rate behavior of a new 150 ksi yield strength TS temper in Levels I, II, IV, V and VII environments. Microstructural observations, corrosion rate and resistance to SCC in full immersion proof ring static tensile tests are reported.
As a result of a Carbonate Stress Corrosion Cracking (CSCC) event at one refinery an investigation was made into the cause and mitigation of CSCC. This paper outlines the information obtained and the development of tools that could be utilized by other refinery fluidized catalytic cracker units (FCCU's) to better assess risk of CSCC.
A corrosion cracking assessment evaluated a 13Cr-5Ni-2Mo 110 ksi grade martensitic stainless steel as a potential well tubing material for oil and gas production from Gulf of Mexico reservoirs. Also, Stress Corrosion Cracking at low H2S/low temp/high acidity (pH<3.5) was tested by Cyclic Slow Strain Rate.
Methods used to destructively determine the actual crack depths in the Pipeline Research Council International project as well as the statistical comparison of those values to the NDE measurements. We also briefly introduce advanced fracture mechanics analysis techniques that can be used to assess the safety significance of crack-like pipeline anomalies.
This paper will detail the environmental cracking test program and results when Alloy UNS S42028 (For applications such as high collapse liners sections in high pressure high temperature (HPHT) reservoirs) was exposed to medium density bromide based clear brine fluids at a temperature of 150oC (302oF).
Metal or thermal spraying is a technology which protects and extends the life of a variety of equipment in hostile environments. This paper presents an experience in utilizing Thermal Spray Coating Technology on top of weld build-up of CS Pressure Vessel eroded shell.
This paper deals with some problems associated with stress corrosion cracking assessment of duplex stainless steels in boiling concentrated solutions.
Supercritical water-cooled reactor (SCWR) is an innovative Generation IV nuclear reactor. Nickel-based alloys, such as UNS N06625, UNS R20033 and UNS N07214 alloys, are selected for the fuel cladding. Knowledge gaps exist as regards their use for the fuel cladding in the SCWR. This paper introduces laboratory results on corrosion and stress corrosion cracking (SCC) of the nickel-based alloys.
Lean duplex stainless steel (LDSS) can provide mechanical properties similar to that of duplex stainless steel (DSS) and is less expensive. The focus of this work was to assess the stress corrosion cracking (SCC) and SCC susceptibility of DSS and LDSS in chloride-containing sour water conditions.
The UNS N09955 is a precipitation hardened Ni-alloy which exhibits a good combination of mechanical strength, ductility, toughness and resistance to hydrogen embrittlement