Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

51318-11017-Evaluation of Corrosion Behavior of Steels for Direct Supercritical CO2 Power Cycle Applications

Picture for Evaluation of Corrosion Behavior of Steels for Direct Supercritical CO2 Power Cycle Applications
Available for download

Autoclave tests were performed in CO₂, O₂, and H₂O at 8 MPa at 50°C and 245°C, (heat exchanger operating conditions). Results show significant corrosion in a pressure / temperature region where H₂O saturated with CO₂ condenses on the coupons.

Product Number: 51318-11017-SG
Author: Reyixiati Repukaiti / Ömer N. Doğan / Randal B. Thomas / Julie D. Tucker / Lucas Teeter / Margaret Ziomek-Moroz / Nicolas J. Huerta
Publication Date: 2018
Industry: Science of Corrosion
$0.00
$20.00
$20.00

In order to investigate corrosion issues of heat exchanger materials at intermediate temperatures in direct supercritical carbon dioxide power cycles, a series of autoclave exposure tests and electrochemical experiments have been conducted. Potential heat exchanger materials are austenitic stainless steels and ferritic-martensitic steels. The autoclave tests were performed in fluid mixtures containing CO₂, O₂, and H₂O at 8 MPa and at two temperatures, 50°C and 245°C, to approximate heat exchanger operating conditions. Mass change measurements and characterization of the corroded surfaces using X-ray diffraction and scanning electron microscopy were performed to understand the corrosion behavior of steels. Additionally, electrochemical tests were performed in CO₂-saturated H₂O at ambient pressure and temperatures up to 50°C to obtain kinetic data in terms of the corrosion rates of the alloys. The results demonstrate that significant corrosion occurs in a pressure / temperature region where H₂O saturated with CO₂ condenses on the coupons. Larger mass change was observed when oxygen was present in the supercritical CO₂ environment. The ferritic-martensitic steel was found to be susceptible to corrosion at low temperatures in direct supercritical CO₂ power cycle environments.

Keywords: Austenitic Stainless Steel, Ferritic-Martensitic Steel, Corrosion Rate, Supercritical CO₂, Oxides

In order to investigate corrosion issues of heat exchanger materials at intermediate temperatures in direct supercritical carbon dioxide power cycles, a series of autoclave exposure tests and electrochemical experiments have been conducted. Potential heat exchanger materials are austenitic stainless steels and ferritic-martensitic steels. The autoclave tests were performed in fluid mixtures containing CO₂, O₂, and H₂O at 8 MPa and at two temperatures, 50°C and 245°C, to approximate heat exchanger operating conditions. Mass change measurements and characterization of the corroded surfaces using X-ray diffraction and scanning electron microscopy were performed to understand the corrosion behavior of steels. Additionally, electrochemical tests were performed in CO₂-saturated H₂O at ambient pressure and temperatures up to 50°C to obtain kinetic data in terms of the corrosion rates of the alloys. The results demonstrate that significant corrosion occurs in a pressure / temperature region where H₂O saturated with CO₂ condenses on the coupons. Larger mass change was observed when oxygen was present in the supercritical CO₂ environment. The ferritic-martensitic steel was found to be susceptible to corrosion at low temperatures in direct supercritical CO₂ power cycle environments.

Keywords: Austenitic Stainless Steel, Ferritic-Martensitic Steel, Corrosion Rate, Supercritical CO₂, Oxides

Product tags
Also Purchased
Picture for Advancement in Cathodic Disbondment Test Standard- NACE TM0115
Available for download

51318-11018-Advancement in Cathodic Disbondment Test Standard- NACE TM0115

Product Number: 51318-11018-SG
Author: Benjamin T. A. Chang / Dennis Wong
Publication Date: 2018
$20.00

Special enhancements: (1) use the high temperature reference electrode - Ag/AgCl; (2) define the test temperature measurement procedure; (3) check the accuracy of the reference electrode; (4) develop an inexpensive anode isolation method.
Picture for Case Study: Solving the Puzzle of 10inch Duplex Stainless Steel Flowline Weld Failure
Available for download

51318-11022-Case Study: Solving the Puzzle of 10inch Duplex Stainless Steel Flowline Weld Failure

Product Number: 51318-11022-SG
Author: Mushaid Nauman, Mohammed Rashid
Publication Date: 2018
$20.00

This paper discusses the detailed inspection, testing, metallurgical analysis and supporting factors from which the most likely cause of pitting corrosion was revealed in the DSS flowline welds.

 
Picture for The Influence of Halide Ions on the Passivity Breakdown of Carbon Steel Based on the Point Defect Model
Available for download

51318-11025-The Influence of Halide Ions on the Passivity Breakdown of Carbon Steel Based on the Point Defect Mo

Product Number: 51318-11025-SG
Author: Elmira Ghanbari / Danyil Kovalov / Alireza Saatchi / Bruno Kursten / Digby D. Macdonald
Publication Date: 2018
$20.00

The influence of the size of aggressive anions on the passivity breakdown of UNS K02700 carbon steel exposed to saturated Ca(OH)2 solutions with the addition of different halides was investigated by using the potentiodynamic polarization (PDP) experiments.

 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support