Menu
Search
Filters
Close
Menu

51318-11087-Corrosion Behavior of Additively Manufactured Alloy N06210 in acidic solutions

Picture for Corrosion Behavior of Additively Manufactured Alloy N06210 in acidic solutions
Available for download

Corrosion rates of low porosity AM S31603 and AM N06210 in several kinds of acidic solutions were similar to those of wrought alloys respectively, the corrosion rates of AM S31603 and AM N06210 became higher with increasing porosity of each specimen.

Product Number: 51318-11087-SG
Author: Yuzo DAIGO / Katsuo SUGAHARA / Syuhei OGOSHI / Kosuke KUWABARA
Publication Date: 2018
Industry: Corrosion Monitoring and Control
$0.00
$20.00
$20.00

Additive manufacturing is a method to manufacture 3D shape of resin or metal. Searching proper manufacturing condition and evaluating mechanical property and microstructure of Titanium-base, Cobalt-base, Nickel-base alloys and stainless steel for the fields such as aerospace, medical and defense field have been progressed. However, there are not many reports about corrosion and oxidation resistance of these alloys especially, there are a few reports about their corrosion resistance in acidic solutions. In this study, high and low porosity specimens of additively manufactured (AM) alloys of UNS+ N06210 and UNS S31603 were prepared intendedly with the selective laser melting (SLM) method. The high and low porosity specimens of AM N06210 and AM S31603 were immersed in several kinds of acidic solutions to estimate their corrosion rate and understand the dependency of the corrosion properties of those on porosity. The paper reveals that corrosion rates of low porosity AM S31603 and AM N06210 in several kinds of acidic solutions were similar to those of wrought alloys respectively, the corrosion rates of AM S31603 and AM N06210 became higher with increasing porosity of each specimen.

Key words: Additive manufacturing, Corrosion, Localized corrosion, N06210, S31603, Sulfuric acid, Hydrochloric acid, hydrofluoric acid

 

Additive manufacturing is a method to manufacture 3D shape of resin or metal. Searching proper manufacturing condition and evaluating mechanical property and microstructure of Titanium-base, Cobalt-base, Nickel-base alloys and stainless steel for the fields such as aerospace, medical and defense field have been progressed. However, there are not many reports about corrosion and oxidation resistance of these alloys especially, there are a few reports about their corrosion resistance in acidic solutions. In this study, high and low porosity specimens of additively manufactured (AM) alloys of UNS+ N06210 and UNS S31603 were prepared intendedly with the selective laser melting (SLM) method. The high and low porosity specimens of AM N06210 and AM S31603 were immersed in several kinds of acidic solutions to estimate their corrosion rate and understand the dependency of the corrosion properties of those on porosity. The paper reveals that corrosion rates of low porosity AM S31603 and AM N06210 in several kinds of acidic solutions were similar to those of wrought alloys respectively, the corrosion rates of AM S31603 and AM N06210 became higher with increasing porosity of each specimen.

Key words: Additive manufacturing, Corrosion, Localized corrosion, N06210, S31603, Sulfuric acid, Hydrochloric acid, hydrofluoric acid

 

Product tags
Also Purchased
Picture for Mild steel corrosion behavior in a CO2-H2O-CHOOH environment
Available for download

51318-11094-Mild steel corrosion behavior in a CO2-H2O-CHOOH environment

Product Number: 51318-11094-SG
Author: Molatelo Thebe / Werner Ernst / Deon Slabbert / Roelf Sandenbergh
Publication Date: 2018
$20.00

The corrosion behavior of mild steel in a gas reforming CO2-H2O-CHOOH environment at high temperature and pressure (210°C; 3500KPa) was studied using polarization and mass loss tests as well as online corrosion monitoring techniques

 
Picture for Influence of tungsten on passivity breakdown and repassivation of 25Cr super duplex stainless steels
Available for download

51318-11102-Influence of tungsten on passivity breakdown and repassivation of 25Cr super duplex stainless steels

Product Number: 51318-11102-SG
Author: Cristian Torres / Mariano Kappes / Roy Johnsen / Mariano Iannuzzi
Publication Date: 2018
$20.00

Two super duplex stainless steels were investigated: a W-free (UNS S32750) and a 2.1 wt% W-containing (UNS S39274) grade. Goals: To study localized corrosion resistance of super duplex stainless steels and how W affects the same.
Picture for Exploring the Corrosion Behavior of Alloy UNS N07718 Manufactured by Additive Manufacturing Under Different Building Directions
Available for download

51318-11171-Exploring the Corrosion Behavior of Alloy UNS N07718 Manufactured by Additive Manufacturing Under Different Building Directions

Product Number: 51318-11171-SG
Author: Filippo Cappuccini / Angelo Donato / Domenico Di Pietro / Antonella Dimatteo
Publication Date: 2018
$20.00

The main scope of this work is to explore different process configurations to understand the corrosion response of additive manufactured alloys and to suggest the parameters to be controlled for future qualification in sour environment.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support