Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

96057 EVALUATION OF AN ELECTROLYTIC ALLOY OF Ni-Co-B AS A HIGH RESISTANCE COATING

Picture for 96057 EVALUATION OF AN ELECTROLYTIC ALLOY OF
Available for download
Product Number: 51300-96057-SG
ISBN: 96057 1996 CP
Author: C. Rodriguez, B.Campillo, J. L. Albarran, J. Genesca, F.J. Rodriguez
$0.00
$20.00
$20.00
The characterization of the corrosion behavior of an electrolytic alloy Ni-Co-B being deposited in a low C steel (AI SI-1018) was carried out using electrochemical methods where the corrosion rate was determined and a comparison with the corrosion rates obtained by a gravimetric method are also included. The solutions used in this study were: HCI 0.1 M H2SO4 0.1 M and KOH at 28%. All tests were performed at room temperature. From the results obtained, the sulfuric acid solution has shown higher corrosion comparable with the others solutions used. Furthermore, the corrosion rates are quite low showing that this electrolytic alloy has a good corrosion resistance. This behavior could be due to the formation of a passivation film or several passivation films. Keywords: Coatings, Electrolytic Alloy, Corrosion, Passivation film.
The characterization of the corrosion behavior of an electrolytic alloy Ni-Co-B being deposited in a low C steel (AI SI-1018) was carried out using electrochemical methods where the corrosion rate was determined and a comparison with the corrosion rates obtained by a gravimetric method are also included. The solutions used in this study were: HCI 0.1 M H2SO4 0.1 M and KOH at 28%. All tests were performed at room temperature. From the results obtained, the sulfuric acid solution has shown higher corrosion comparable with the others solutions used. Furthermore, the corrosion rates are quite low showing that this electrolytic alloy has a good corrosion resistance. This behavior could be due to the formation of a passivation film or several passivation films. Keywords: Coatings, Electrolytic Alloy, Corrosion, Passivation film.
Product tags
Also Purchased
Picture for 96061 CORROSION PERFORMANCE OF MODIFIED
Available for download

96061 CORROSION PERFORMANCE OF MODIFIED 13CR OCTG

Product Number: 51300-96061-SG
ISBN: 96061 1996 CP
Author: M. Sugiyama, H. Asahi, T.Hara
$20.00
Picture for 96059 EVALUATION OF CORROSION TESTING
Available for download

96059 EVALUATION OF CORROSION TESTING TECHNIQUES FOR SELECTION OF CORROSION RESISTANT ALLOYS FOR SOUR GAS SERVICE

Product Number: 51300-96059-SG
ISBN: 96059 1996 CP
Author: Rashmi B. Bhavsar, Edward L. Hibner
$20.00
Picture for 96063 GALVANIC CORROSION IN OIL AND GAS
Available for download

96063 GALVANIC CORROSION IN OIL AND GAS ENVIRONMENTS

Product Number: 51300-96063-SG
ISBN: 96063 1996 CP
Author: H. Kaneta, T. Hara, H. Asahi
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support