Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

09369 New Results on the Selection of Nickel Alloys and a 6% Mo Special Stainless Steel for High Temperature Acid Service

Picture for 09369 New Results on the Selection of Nickel Alloys and a 6% Mo Special Stainless Steel for High Tem
Available for download
Product Number: 51300-09369-SG
ISBN: 09369 2009 CP
Author: Ralph Babler and Helena Alves
Publication Date: 2009
$0.00
$20.00
$20.00
In the literature there are not much data available to describe the corrosion behavior of nickel alloys and special stainless steels in acids at high temperature, in particular above the boiling point. Therefore, a laboratory testing program was performed with the 6 % Mo stainless steel alloy 31 (UNS N08031), and the nickel alloys 59 (UNS N06059) and B-2 (UNS N10665) to obtain corrosion data in formic acid, acetic acid, phosphoric acid, polyphosphoric acid, p-toluene sulfonic acid and lactic acid at high temperatures up to 300 °C. From the results it was concluded that alloy 59 was the best choice for formic and acetic acids at temperatures up to 300 °C. In phosphoric acid up to approx. 120 °C alloy 31 exhibited the best performance. At higher temperatures the acid becomes extremely corrosive and none of the investigated materials was resistant. In the diluted acid (1 %) alloy 31 was fully suitable up to at least 300 °C and alloys 59 and B-2 up to 200 °C. Alloy B-2 and alloy 59 showed the best behaviour in polyphosphoric acid at 200 °C. In 30 % concentrated p-toluene sulfonic acid at 200 °C all alloys tested were unsuitable; at 100 °C the corrosion rates were very low for both alloy 59 and alloy B-2 but slight local corrosion might occur. In much diluted acid (0.1 %) alloy 31 behaved well. In lactic acid at 180 °C increased corrosion underneath deposits was detected; the best performance was observed for alloy 59. Further tests with lower acid concentrations and/or lower temperatures are underway.

Keywords: alloy 59 (UNS N06059), alloy 31 (UNS N08031), alloy B-2 (UNS N10665), inorganic acids, organic acids, corrosion
In the literature there are not much data available to describe the corrosion behavior of nickel alloys and special stainless steels in acids at high temperature, in particular above the boiling point. Therefore, a laboratory testing program was performed with the 6 % Mo stainless steel alloy 31 (UNS N08031), and the nickel alloys 59 (UNS N06059) and B-2 (UNS N10665) to obtain corrosion data in formic acid, acetic acid, phosphoric acid, polyphosphoric acid, p-toluene sulfonic acid and lactic acid at high temperatures up to 300 °C. From the results it was concluded that alloy 59 was the best choice for formic and acetic acids at temperatures up to 300 °C. In phosphoric acid up to approx. 120 °C alloy 31 exhibited the best performance. At higher temperatures the acid becomes extremely corrosive and none of the investigated materials was resistant. In the diluted acid (1 %) alloy 31 was fully suitable up to at least 300 °C and alloys 59 and B-2 up to 200 °C. Alloy B-2 and alloy 59 showed the best behaviour in polyphosphoric acid at 200 °C. In 30 % concentrated p-toluene sulfonic acid at 200 °C all alloys tested were unsuitable; at 100 °C the corrosion rates were very low for both alloy 59 and alloy B-2 but slight local corrosion might occur. In much diluted acid (0.1 %) alloy 31 behaved well. In lactic acid at 180 °C increased corrosion underneath deposits was detected; the best performance was observed for alloy 59. Further tests with lower acid concentrations and/or lower temperatures are underway.

Keywords: alloy 59 (UNS N06059), alloy 31 (UNS N08031), alloy B-2 (UNS N10665), inorganic acids, organic acids, corrosion
Product tags
Also Purchased
Picture for 08189 New Experiences with Nickel Alloys and Special Stainless Steels for an Optimized Material Sele
Available for download

08189 New Experiences with Nickel Alloys and Special Stainless Steels for an Optimized Material Selection in Acids at High Temperature

Product Number: 51300-08189-SG
ISBN: 08189 2008 CP
Author: Helena Alves and Ralph Baessler
Publication Date: 2008
$20.00
Picture for 06221 ALLOYS SUITABLE FOR PHOSPHORIC ACID
Available for download

06221 ALLOYS SUITABLE FOR PHOSPHORIC ACID APPLICATIONS

Product Number: 51300-06221-SG
ISBN: 06221 2006 CP
Author: Helena Alves, D.C. Agarwal, Antoine Hoxha, Friedrich Stenner
Publication Date: 2006
$20.00

This work reports on the success achieved with alloy 31 in critical parts of the phosphoric acid process. Laboratory results are presented together with field experience and examples of application.
Picture for 04233 Alloy Selection for Dilute and Medium
Available for download

04233 Alloy Selection for Dilute and Medium Concentration Sulfuric Acid

Product Number: 51300-04233-SG
ISBN: 04233 2004 CP
Author: Ulrich Brill and Helena Alves, ThyssenKrupp VDM GmbH
Publication Date: 2004
$20.00

Sulfuric acid is one of the most important elementary substances of the chemical industry.  There is no stainless steel or even a nickel base alloy available which is suitable over the entire concentration range.  This paper will give corrosion data in up to 75 % sulfuric acid at boiling temperature for various commercial grades as well as for some new developmental alloys.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support