Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

08096 Influence of Impact Angles on Mass Loss Rates of CRAs exposed to a High Velocity Multiphase Flow

Picture for 08096 Influence of Impact Angles on Mass Loss Rates of CRAs exposed to a High Velocity Multiphase Fl
Available for download
Product Number: 51300-08096-SG
ISBN: 08096 2008 CP
Author: J. Haberl, G. Mori, M. Oberndorfer, W. Havlik, P. Hosemann, M. Hawley, and J. Swadener
Publication Date: 2008
$0.00
$20.00
$20.00
A combined flow loop - jet impingement pilot plant has been used to determine mass loss rates in a mixed gas - saltwater - sand multiphase flow at impact velocities up to 70 m/s. Artificial brine with a salt content of 27 g/l was used as liquid phase. Sand content, with grain size below 150 µm, was 2.7 g/l brine. CO2 at a pressure of 15 bar was used as gas phase. The impact angle between jet stream (nozzle) and sample surface was varied between 30 and 90°.
A combined flow loop - jet impingement pilot plant has been used to determine mass loss rates in a mixed gas - saltwater - sand multiphase flow at impact velocities up to 70 m/s. Artificial brine with a salt content of 27 g/l was used as liquid phase. Sand content, with grain size below 150 µm, was 2.7 g/l brine. CO2 at a pressure of 15 bar was used as gas phase. The impact angle between jet stream (nozzle) and sample surface was varied between 30 and 90°.
Product tags
Also Purchased
Picture for 08086 Balance of Alloying Elements in Wear Resistant Co-Based Alloys for Oil Drilling Applications
Available for download

08086 Balance of Alloying Elements in Wear Resistant Co-Based Alloys for Oil Drilling Applications

Product Number: 51300-08086-SG
ISBN: 08086 2008 CP
Author: Matthew X. Yao and James B. C. Wu
Publication Date: 2008
$20.00
Picture for 08090 Performance of Selected Corrosion Resistant Alloys Under Simulated Seawater Injection Conditio
Available for download

08090 Performance of Selected Corrosion Resistant Alloys Under Simulated Seawater Injection Conditions Downhole

Product Number: 51300-08090-SG
ISBN: 08090 2008 CP
Author: Robert D. Mack and John Carminati
Publication Date: 2008
$20.00

A for fitness-for-service evaluation was conducted in simulated seawater injection conditions for three levels of dissolved oxygen (30, 50, and 100 ppb) to assess the effect of upsets in control of the deaeration. Four materials were studied:  austenitic UNS S31603, duplex UNS S39274, and two nickel base alloys
Picture for 08137 Flow Modeling to Optimize Wet Gas Pipeline Water Management and Corrosion
Available for download

08137 Flow Modeling to Optimize Wet Gas Pipeline Water Management and Corrosion

Product Number: 51300-08137-SG
ISBN: 08137 2008 CP
Author: F. Carimalo, I. Fouche, R. Hauguel, X. Campaignolle, T. Chretien, and M. Meyer
Publication Date: 2008
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support