AMPP Store

Featured Items

Available for download

AC Corrosion of Pipelines-Chapter 2

Product Number: 37656-Ch02

$55.00

One of AMPP's best-selling titles, AC Corrosion of Pipelines, covers the essential topics related to AC corrosion of pipelines, a problem affecting the safety and reliability of underground pipelines.

Chapter 2, "Sources and Priniciples of AC Interence," is an introduction to the wide variety of sources generating AC interference and the main principles of the interference. The generation of AC interference under steady-state operation and the fault conditions are detailed. In particular, the modes and mechanisms of AC interference (i.e., capacitive coupling, resistive coupling, inductive coupling, etc.) are reviewed systematically for educational and practical purposes.

2021 AMPP, color, 13 pages with references

Available for download

Advances in Biomedical Corrosion

Product Number: 37688-PDF

ISBN: 978-1-57590-489-4

$145.00

Advances in Biomedical Corrosion: New Trends, Challenges, and Solutions encompasses just over 10 years of research into the interplay between corrosion and biomedical materials, based on technical papers by experts in the field.

While the range of biomedical materials is impressive--spanning metals, alloys, ceramics, and polymers--this title focuses on metals and alloys.

The book covers corrosion topics and technologies ranging nanomaterials for biomedical coatings to additive manufacutring for hip and knee replacements to the potentials of various alloys.

2023 AMPP e-book, 126 pages, color

Available for download

AMPP Guide 21567-2024, Guide for Sampling Program Development in Hydrocarbon Production, Transportation and Processing

Product Number: AMPP Guide 21567-2024

Publication Date: 2024

$109.00

The intent of this document is to describe the major aspects of the sampling process, from specific sample identification, determination of analytical requirements, through sample point design, to sample collection. Consideration of these aspects is necessary for the development of robust and safe sampling programs, protocols, and procedures to facilitate indirect corrosion monitoring.

This document is to assist end users in the development of sampling programs. The guidance is structured to provide an awareness of the major aspects of program design, which if not addressed, may have a significant negative impact on the overall performance of these programs. While this document has been primarily developed with a focus on sampling for indirect internal corrosion monitoring; the basic concepts have a broader applicability and may be of benefit to those developing sampling programs in other areas or for other requirements.

Available for download

AMPP Guide 21611-2024, Pulsed Laser Ablation Technical Guide for Ferrous Metal Substrates

Product Number: AMPP Guide 21611-2024

Publication Date: 2024

$109.00

This guide describes the use of portable or stationary Q-switched pulsed laser ablation (PLA) systems, consisting of directed energy technology for the surface preparation of ferrous substrates as required for applying coatings or linings, welding, adhesive bonding, decontamination, and other applications. It will discuss the feasibility and benefits of PLA when compared to other laser technologies as well as traditional surface preparation methods. Detailed information is provided on the equipment, including a generic description, suitable applications and locations for use, types of coat- ings or contaminants suitable for removal, advantages, and limitations. This guide includes requirements for operating conditions, and environmental, health, and safety compliance. Appendix A provides explanatory information, some of which uses terms specific to AMPP SP21511-1, “Laser Ablation for Metallic Surface Preparation of Ferrous Metals, Pulsed Laser.” Appendix B provides an amplification of considerations for use including technical information regarding the interaction of the laser with coatings and substrate. Appendix C addresses additional considerations for environ- mental approvals. Appendix D lists equipment and operating parameters.

Available for download

AMPP SP21460-2022, Corrosion Control of Pilings in Non-marine Applications

Product Number: AMPP SP21460-2022

Publication Date: 2022

$109.00

This document discusses the issues to be taken into consideration with respect to accounting for corrosion on steel piles in non-marine applications. The rate of corrosion, design life and methods of corrosion control are discussed in a manner to provide the reader with guidance as to how to proceed with determining these factors. This standard is applicable to pipe piles, sheet piles, H piles, and other steel piles.

Available for download

AMPP SP21466-2024, Materials Sustainability Framework Based on Corrosion Management System

Product Number: AMPP SP21466-2024

Publication Date: 2024

$109.00

This standard aims to provide a framework for users and their respective organizations in assessing both the material sustainability and material stewardship of their operations using recognized industrial methods, resources, and practices built on the corrosion management framework. Some of these methods, resources, and practices are already covered in the corrosion management system framework; however, some are expanded upon within this standard using a material sustainability maturity model beyond the corrosion management framework. Therefore, this standard aims to empower material and corrosion professionals to better deliver value from a life cycle and circular economy standpoint while leveraging existing and emerging tools to support assets, operations, enterprises, stakeholders, and communities through the value chain.

Available for download

AMPP SP21487-2021, Inspecting and Reporting Biofouling and Antifouling Systems’ Condition during Underwater Inspections on Ships

Product Number: AMPP SP21487-2021

Publication Date: 2021

$109.00

Biofouling accumulation on a ship’s hull has a direct impact on fuel consumption and associated greenhouse gas (GHG) emissions and may pose a biosecurity risk due to the presence of non-indigenous, potentially invasive aquatic species.

The antifouling system (AFS) is designed to protect the underwater surfaces from biofouling accumulation. Underwater inspections (UWI) of ships are typically carried out to monitor and verify the condition of the underwater hull and the AFS.

Recipients of UWI reports are reliant on the quality of information provided to make adequate decisions relating to hull performance, AFS condition and performance, biofouling management and associated risk assessments. Consistent and good quality reporting is key to effective underwater hull condition record-keeping and management.

Available for download

AMPP SP21494-2022, Technical Specification for Ship Coating Repair

Product Number: AMPP SP21494-2022

Publication Date: 2022

$109.00

This standard is based upon the technical requirements for coating repair developed by the National Marine Ship Standardization Technical Committee Ship Repair Branch Technical Committee in China, but may be applicable for use globally provided it meets the field requirements of marine maintenance and fulfills the environmental protection requirements of the appropriate governing body.

Available for download

AMPP SP21507-2022, Standard Practice for Sandwich Plate Repair of Steel Structures

Product Number: AMPP SP21507-2022

Publication Date: 2022

$109.00

Oil and gas industry onshore and offshore drilling, production, storage, and transportation generally experience very corrosive environments. Even though corrosion prevention systems, such as cathodic protection, protective coatings, and liquid/vapor phase inhibitors are usually used for corrosion protection, severe corrosion of the structures is still unavoidable without effective corrosion protection and appropriate corrosion management. The repair of degraded structural members having substantial corrosion damage is critical for maintaining structural integrity for safe and continuous operations.

This standard practice formalizes a methodology of steel sandwich plate repair technology. This methodology uses a new steel plate or prefabricated structural component laid on top of the existing steel plate to be repaired. An elastomer core is used to bond the new plate/component and the existing steel plate to form a steel sandwich plate structure, thereby repairing the existing steel substrate without it being cut and replaced. This method is intended to restore the strength of the damaged structural members, or to reinforce existing structures.

Available for download

AMPP SP21511-1-2024, Laser Ablation for Surface Preparation of Ferrous Metals, Pulsed Laser

Product Number: AMPP SP21511-1-2024

Publication Date: 2024

$109.00

This AMPP standard, designated AMPP SP21511-1, is intended to enable specifiers to develop project specification re- quirements and end users to achieve the required level of surface preparation or cleanliness using pulsed laser ablation (PLA). For the purpose of this standard, PLA employs pulsed, Q-switched laser technology.

PLA is a media-free, commercially available process that uses high-intensity directed energy in the form of a collimated, monochromatic, pulsed, focused, and scanned laser beam to remove coatings, oxides, contaminants, and hazardous materials (HAZMATs). This process is also referred to as laser ablation coating removal (LACR). PLA may be used to prepare coated or uncoated ferrous metal substrates before the application of a protective coating or lining, or it may be used in conjunction with other surface preparation methods. PLA offers environmental, health, and safety (EH&S) ben- efits as well as a level of precision that cannot be achieved with other surface preparation technologies. This standard is intended to be used by corrosion control professionals in civil infrastructure, defense, nuclear, petrochemical, auto- motive, aerospace, and other related industries. It is for use by coating specifiers, engineers, contractors, inspectors, and others who are responsible for defining a specific level of surface cleanliness or producing a post-laser treatment surface condition specified, using PLA technology.

PLA can remove 100% of existing coatings. However, it is most effective for applications requiring less than 95% of coating removal (by surface area of exposed substrate) when prescribed by appropriate Technical Authority guidance.

The primary functions of PLA cleaning applications are:

a) To remove material from the surface that can cause premature failure of the new coating system. Paragraph A1 of Appendix A (nonmandatory) provides additional information.

b) To enhance the adhesion of a new coating system.

c) To expose the surface profile of the substrate that is underneath the existing coating, rust, other corrosion products, or other contaminants and,

d) To reduce or remove nonvisible contamination that may be present on the substrate. Examples include thin films of oil and grease, and soluble ionic materials such as chlorides, ferrous salts, nitrates, and sulfates. PLA can reduce or completely remove water-soluble contaminants as well as fixed, non-smear- able low-level radiological contamination.

Available for download

AMPP SP21518-2022, Recovery and Repassivation after Low pH Excursions in Open Recirculating Cooling Water Systems

Product Number: AMPP SP21518-2022

Publication Date: 2022

$109.00

This standard practice presents guidelines for preplanning for, recovering from, and repassivation after a low pH excursion in open recirculating water systems, no matter what the cause. The procedures presented in this standard inno way preclude the use of other procedures but are presented as best practices developed over years of experienceinavarietyofplants.Theprovisionsofthisstandardshouldbeappliedunderthedirectionofqualifiedwater-treatmentpersonnelfromwater-treatmentsuppliersand/orconsultants andplantpersonnel.

Available for download

AMPP SP21548-2022, Pressurized Water Cleaning of Concrete and Cememtitious Materials - Thorough Cleaning

Product Number: AMPP SP21548-2022

Publication Date: 2022

$109.00

This standard is intended for use by coating or lining specifiers, applicators, inspectors, or others who require the use of pressurized water cleaning technology to achieve a defined level of visual cleanliness of concrete surfaces. This standard contains requirements for Thorough Cleaning. Requirements for Light Cleaning are addressed in a separate standard.

Available for download

AMPP TM21451-2023, Evaluation of Carbon and Low-Alloy Steels for Resistance to Stress-Oriented Hydrogen-Induced Cracking (SOHIC)

Product Number: AMPP TM21451-2023

Publication Date: 2023

$109.00

Carbon and low-alloy steels in plate form and their welded products may be susceptible to one or more forms of environmental cracking when exposed to wet H₂S service conditions. These include, for example, (1) sulfide stress cracking (SSC) of hard zones and welds; (2) hydrogen-induced cracking (HIC) in the parent metal; and (3) stress-oriented hydrogen-induced cracking (SOHIC) in the region adjacent to welds of nominally acceptable hardness. Extensive work has been conducted over many years to understand various fundamental and applied aspects of these phenomena. Experiences in refinery wet H₂S operations have directed particular attention to understanding SOHIC and the various metallurgical and environmental parameters that govern its occurrence.

Scope

This standard was prepared to provide a test method for consistent evaluation of pipeline and pressure vessel steels to SOHIC caused by hydrogen absorption from aqueous sulfide corrosion. The test conditions are not designed to simulate any specific service environment. The test is intended to evaluate resistance to SOHIC only, and not to other adverse effects of sour environments such as sulfide stress cracking (SSC), pitting, or mass loss from corrosion.

Available for download

AMPP TM21510-2022, Potentiodynamic Scans: Material Preparation, Data Acquisition and Analysis

Product Number: AMPP TM21510-2022

Publication Date: 2022

$109.00

This standard provides a method for collecting reproducible potentiodynamic data, enabling the comparison of data across various experiments and laboratories. This method is intended for those with experience in potentiodynamic data collection across all of industry and academia. This method has been adapted from Appendix B of MIL-STD-889. Users interested in submitting data for acceptance into MIL-STD-889 shall refer to the latest version of MIL-STD-889

Available for download

AMPP TM21606-2024, Weight Percent Solids in High Solids Coatings for the Maritime Industry

Product Number: AMPP TM21606-2024

Publication Date: 2024

$109.00

With an increasing use of ultra-high solids (UHS) and solvent-free (SF) coatings, a standardized and verified test method to provide reliable results in a practical manner is needed to measure and determine the total weight solids in coatings.

This AMPP test method aims to provide a precise and practical method to determine weight percent solids in high solids coatings.

This test method applies to coatings used during the building, operation, and maintenance of ships and maritime installations.

Available for download

AMPP TR21448-2021, Corrosion Prevention and Control for Marine Scrubbers

Product Number: AMPP TR21448-2021

Publication Date: 2021

$109.00

This Technical Report provides sound technical information on the corrosion risk of exhaust gas scrubbers to ship owners, shipyards, marine engineers, scrubber designers and suppliers. Marine scrubbers used on ships are mainly wet scrubbers, which are open-loop, closed-loop, or hybrid types. Each system is discussed with respect to a description of each type of scrubber, washwater environments, materials of construction (metals and non-metals), pitfalls of inspection, fabrication, and welding of metals, service performance and applications history including descriptions of corrosion failures and successes, and repair and maintenance guidance.

Available for download

AMPP TR21540-2022, Correlating Qualitative Surface Profile Assessment Methods to Quantitative Methodology on Prepared Concrete Substrates

Product Number: AMPP TR21540-2022

Publication Date: 2022

$109.00

Coating/lining manufacturers and/or facility owners frequently specify cleaning and roughening of the concrete surface prior to product installation. The specifications may reference qualitative methods including visual assessments using comparison coupons or quantitative methods including surface profile depth measurements. However, prior to this Technical Report, there was no known data to inform a conversion between qualitative and quantitative methods. The outcomes of this Technical Report enable coating manufacturers, engineers, specifiers, and contractors to convert well-established qualitative methods to quantitative values based on an interlaboratory experiment. While current quantitative methods can measure up to 6 mm (250 mils), extremely rough concrete surfaces (exceeding ~1.5 mm, or ~50 mils) were not included in the experiment due to the inability to stabilize the instrument probe and obtain accurate data.

Avoiding Corrosion in Desalination Plants

Product Number: 37647-POD

ISBN: 978-1-57590-390-3

Author: Roger Francis

$147.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Over the past decade, the author, Roger Francis, has looked at some very expensive corrosion failures in desalination plants. Avoiding Corrosion in Desalination Plants explains how to avoid existing corrosion problems and how to avoid them in new builds.

This book looks at corrosion problems specific to multistage flash (MSF), multiple-effect distillation (MED), and seawater reverse osmosis (SWRO) desalination plants, describing their causes, some solutions, and the relative performance of various materials. It gives advice on procuring materials for desalination plants to avoid quality problems.

2019 NACE, 6 x 9" trim size, color, perfect bound, 214 pages

Available for download

BRIDGES: A LOOK BACK Historic Studies in Cathodic Protection: The 1990s

Product Number: 37682-pdf

ISBN: 978-1-57590-439-9

Author: Jean Broge

$91.00

RARELY SEEN RESEARCH: Bridges: A Look Back—Historic Studies in Cathodic Protection: The 1990s, is a companion book to Bridges: A Look Back—Case Studies in Cathodic Protection: Substructures and Bridges: A Look Back—Case Studies in Cathodic Protection: Superstructures, both of which consist of nearly 30 years of curated legacy NACE technical papers and journal articles that cover exactly what the titles suggest.

This book consists of edited case histories, while the two original titles are compiled of the original, unabridged technical papers and journal articles.

2023 AMPP, 6 x 9 trim size, 52 pages, color

Bridges: Historic Studies in CP 1990s

Product Number: 37682-POD

ISBN: 978-1-57590-438-2

$68.25

This book consists of edited case histories, while the two original titles are compiled of the original, unabridged technical papers and journal articles.

2023 AMPP, 6 x 9 trim size, 52 pages, color

New Products

Corrosion Basics-Chapter 2: Electrochemistry of Corrosion

Product Number: 37630-Ch02

$125.00

Much of the experience and many of the workable solutions developed in one area of corrosion work can be used to improve the control procedures of another area. While most people work in only one area of this total discipline, there is always the possibility that a shift in responsibilities or interest brings one to work in a completely different area of corrosion prevention and control.

AMPP's Corrosion Basics: An Introduction is renowned inside (and out of) the corrosion industry for its general coverage of the ever-increasing field of corrosion control.

Chapter 2, "Electrochemistry of Corrosion," of Corrosion Basics is fundamental to an understanding of why and how metals corrode. In fact, the author suggests that the "reader proceed through this chapter carefully, concentrating particularly on learning the component parts of a corrosion cell and its interrelationships."

2018 AMPP, black and white, 75 pages, pdf

Pipeline Coatings-Chapter 3: Development of Pipeline Coatings

Product Number: 37616-Ch03

$75.00

The evolution and development of pipeline coating technology can be traced to the 1940s and continues to be of global interest. The industry's understanding of pipeline coatings has evolved to a stage that delivers a comprehensive review of the scientific, technical, and practical aspect of pipeline coatings.

AMPP's best-selling title Pipeline Coatings covers all of that as well as defining a pipeline integrity management (PIM) program that includes five steps to maximize integrity and safety.

Chapter 3 of Pipeline Coatings, "Development of Pipeline Coatings," focuses on the oil and gas industry. Generally, pipeline coatings are divided into two categories--plant applied and field-applied coatings. Chapter 3 describes primary coatings in both categories including coal tar, asphalt, liquid epoxy, and many more.

2017 AMPP, black and white, 41 pages, pdf

Available for download

Field Guide for Managing Iron Sulfide-Chapter 2: What is Black Powder and What are the Health and Safety Concerns

Product Number: 37642-Ch02

$55.00

AMPP's title Field Guide for Managing Iron Sulfide (Black Powder) within Pipelines or Processing Equipment has become an increasingly vital tool for pipeline maintenance and production in the oil and gas industry.

Written to provide guidance and instruction to corrosion control professionals and operations personnel, it provides straightforward, practical guidance regarding what is “black powder,” and why it may be a concern.

Chapter 2, "What is Black Powder and What are the Health and Safety Concerns," provides a full overview of the numerous forms of iron sulfide, the most distinctive component of black powder.

2019 AMPP, color, 23 pages

Corrosion Management for a Sustainable Future-Ch12: Green Corrosion Inhibitors

Product Number: 37645-Ch12

$55.00

Sustainability is a relatively new concept for many, though not for those in the corrosion industry. The AMPP title, Corrosion Management for a Sustainable Future, explores sustainability from multiple corrosion angles. But there is a constant theme thoughtout the title beyond just corrosion. The theme is materials stewardship.

In Chapter 12, "Green Corrosion Inhibitors," the editors address the fact that while corrosion cannot be stopped, it can be slowed through a number of corrosion prevention angles, such as the alteration of the environment, which includes corrosion inhibitors. This chapter focuses on environmentally friendly solutions to corrosion management.

2022 AMMP, color, 25 pages

Available for download

Forms of Corrosion: Recognition & Prevention-Chapter 1--General Corrosion of Metals

Product Number: 37626-Ch01

$125.00

The classic AMPP reference book Forms of Corrosion: Recognition & Prevention presents a crash course of the eight major forms of corrosion. Each chapter provides an introduction lesson that then leads to an abundance of Case Histories that present both problems and solutions for each form of corrosion.

While the editors show that all eight forms of corrosion overlap to some extent, the focus of Chapter 1, "General Corrosion of Metals," is clear by its title.

This chapter alone has 58 Case Histories related to the corrosion of metals and details the environment, conditions, and solution suggestions to help any student or technician reference thier real-life situation with documented solutions.

2019 AMPP, black & white, 67 pages

Available for download

AC Corrosion of Pipelines-Chapter 2

Product Number: 37656-Ch02

$55.00

2021 AMPP, color, 13 pages with references

Available for download

AMPP TM21606-2024, Weight Percent Solids in High Solids Coatings for the Maritime Industry

Product Number: AMPP TM21606-2024

Publication Date: 2024

$109.00

This AMPP test method aims to provide a precise and practical method to determine weight percent solids in high solids coatings.

This test method applies to coatings used during the building, operation, and maintenance of ships and maritime installations.

Available for download

AMPP Guide 21567-2024, Guide for Sampling Program Development in Hydrocarbon Production, Transportation and Processing

Product Number: AMPP Guide 21567-2024

Publication Date: 2024

$109.00

Available for download

AMPP Guide 21611-2024, Pulsed Laser Ablation Technical Guide for Ferrous Metal Substrates

Product Number: AMPP Guide 21611-2024

Publication Date: 2024

$109.00

Available for download

AMPP SP21511-1-2024, Laser Ablation for Surface Preparation of Ferrous Metals, Pulsed Laser

Product Number: AMPP SP21511-1-2024

Publication Date: 2024

$109.00

The primary functions of PLA cleaning applications are:

a) To remove material from the surface that can cause premature failure of the new coating system. Paragraph A1 of Appendix A (nonmandatory) provides additional information.

b) To enhance the adhesion of a new coating system.

c) To expose the surface profile of the substrate that is underneath the existing coating, rust, other corrosion products, or other contaminants and,

Available for download

AMPP SP21466-2024, Materials Sustainability Framework Based on Corrosion Management System

Product Number: AMPP SP21466-2024

Publication Date: 2024

$109.00

$Practical Math for the Protective Coatings Industry$

Practical Math for the Protective Coatings Industry

Product Number: 37690-POD

ISBN: 978-1-57590-475-7

$120.00

Back in print, Practical Math for the Protective Coatings Industry is specifically geared toward individuals who have avoided math since leaving school some time ago and now have a difficult time understanding the computations involved in the protective coatings field.

It explains, for example, how to determine the wet film thickness (WFT) needed to meet a specified dry film thickness (DFT) when a paint is thinned by 10%. Those somewhat proficient in calculating quantities will find that this book offers insights into alternative approaches that will lead to a fuller understanding of mathematical relationships.

2024 AMPP, black & white, 240 pages, 6 x 9 trim

Standards and Best Practice for a Protective Coatings Inspector

Product Number: 37689-POD

ISBN: 978-1-57590-497-9

$200.00

Inspection is considered as insurance for the purpose of preventing premature coating failures. This book covers many of the aspects of inspections required to assure quality coating work. it also offers multiple application examples including storage tanks, concrete floors, nonskid coatings, surface prep, inspection equipment, and more.

Standards and Best Practice for a Protective Coatings Inspector is a comprehensive guide to all the processess involved in ensuring the safety and longetivity of coatings and the assets they protect.

2024 AMPP, perfect bound, 490 pages, color

Available for download

AMPP Guide 21555-2024, Water Analysis for Corrosion Prediction - Sampling Analysis and Interpretation

Product Number: AMPP Guide 21555-2024

Publication Date: 2024

$109.00

This Guide focuses on those water chemistry parameters that are key for corrosion prediction. Additional parameters may be required for other materials and corrosion evaluations and decisions. This Guide does not provide a procedure for how, when, and where to take water samples or how to preserve samples.

Available for download

AMPP SP21543-2024, Pressurized Water Cleaning of Concrete and Cementitious Materials—Light Cleaning

Product Number: AMPP SP21543-2024

Publication Date: 2024

$109.00

This standard includes procedures for using pressurized water to remove loosely adhered surface contaminants. It contains requirements for the cleaning process, for the end condition of a lightly cleaned concrete surface, and for verification of the end condition. The standard does not address removal of water-insoluble contamination; assessment of concrete soundness and pH; repair of the substrate and exposed reinforcing steel; or required surface profile.

Potential Theory Applied to Cathodic Protection Design, 2nd Edition

Product Number: 37694-POD

ISBN: 978-1-57590-495-5

Author: Rogelio de las Casas, Ronald Bianchetti

Publication Date: 2024

$155.00

NEW! The first edition of Potential Theory Applied to Cathodic Protection Design showcases the mathematical development of analytical equations for the design of cathodic protection (CP) systems for underground structures with anode groundbeds having various configurations. Equations include calculations for the resistance and voltage (potential) to assist the CP design engineer.

This second edition has several important changes including updates on integral and analytic solutions for horizontal anodes in the same trench, an approach that was insufficiently developed in the first edition.

Also new for the second edition is an index for enhanced reader experience.

Other updates include:

•Generalization of groundbed resistance combining the equation for anodes with different length and depth, with the equation for different distance between anodes.

•Calculation of anode’s current in a groundbed, based on the crowding factor.

•Generalization of groundbed resistance combining the equation for anodes with different length and depth, with the equation for different distance between anodes.

•Calculation of anode’s current in a groundbed, based on the crowding factor.

•By means of the use of integral formulations, particularizes the use of the APM for any combination of underground anode systems.

2024 AMPP

Available for download

Cost of Corrosion Model for Corrosion Under Insulation (CUI) Program Scoping and Optimization

Product Number: MECC23-20377-SG

Author: Muhammad Zaid Kamardin, Muhammad Afiq Mansor, Hambali Chik, Azniza Azmy

Publication Date: 2023

$20.00

Corrosion under insulation (CUI) is a form of corrosion resulting from water trapped under insulation. CUI is a main asset integrity threat to many processing facilities. CUI damage is not readily identifiable and hidden underneath the insulation.

Available for download

The Development of Highly Corrosion Resistant PH Nickel Bar for Sour Oil and Gas and HydrogenStress Cracking Resistance

Product Number: MECC23-20363-SG

Author: Stephen McCoy; Brian A. Baker; William MacDonald

Publication Date: 2023

$20.00

The Precipitation Hardenable Nickel alloys 925, 718, 945, 945X and 725 are widely used for critical downhole oil field applications such as high strength tubing hangers and completion equipment. The materials are particularly useful in High Pressure/High Temperature wells where high strength and corrosion resistance are required in H2S containing production fluids.

Figure 1 shows a graphical summary of environmental service limits for the application of precipitation hardened nickel alloys defined within the NACE/ISO standards.

Available for download

Facilitating the Use of Leak Detection Sensors Using Web-Based Remote Monitoring

Product Number: MECC23-20309-SG

Author: Jamey Hilleary

Publication Date: 2023

$20.00

Pipeline leak detection is emerging as a prime focus of Pipeline and Hazardous Materials Safety Administration (PHMSA) and other regulatory agencies in the United States as well as jurisdictions all over the world. The immense volume of buried pipelines and the fact that much of this buried infrastructure is over forty years old1 combine to present increasing risk of leaks with potentially catastrophic results. During the twenty-year timespan from 2002 through 2021, in the United States alone, the Pipeline and Hazardous Materials Safety Administration (PHMSA) recorded 42 hazardous liquids incidents resulting in 35 fatalities, 80 injuries, and over 147,000 barrels spilled (Figure 1).

Available for download

Saudi Aramco Corrosion Management Solution (CMS) – A Proactive Transformation in Corrosion Management

Product Number: MECC23-20308-SG

Author: Abdullah M. Alratoee; Faisal M. Al-Mutahhar; Ibrahim A. Albrahim; Rakan A. Al-Shebil; Ayman A. Alabdullatif; Ricardo S. Costa; Yousef A. Aldossary; Muntathir M. Al-Jumaah

Publication Date: 2023

$20.00

Maximizing asset uptime and reducing maintenance costs are essential in any process facility. Effective corrosion management is a key driver to achieving these goals. Corrosion management involves monitoring and controlling corrosion to maintain the integrity of equipment and improve availability and safety.

Welcome to the NACE Store

Association for Materials Protection and Performance