AMPP Store - Individual Conference Papers

Available for download

Inductive and DC Stray Current Interference from Different HVDC Transmission Line Systems on Metallic Pipelines

Product Number: 51323-18925-SG

Author: Boshra Momen Nejad, Brandon Miller

Publication Date: 2023

$20.00

Back in 2018, we published a paper on a joint industrial R&D project, during which we performed detailed field measurements on selected pipeline segments in close vicinity to a High Voltage Direct Current (HVDC) transmission line during planned staged fault tests on the power line. Induced voltages on these pipelines were recorded during the HVDC staged fault process, which was conducted by the utility company. The measurement results from these tests were used for further validation or modification of an existing industrial guideline that focuses on the influence of HVDC power lines on metallic pipelines. Verification of future modeling results was another expected outcome of this study.

Available for download

Industrial Marketing & Sales in a Digital Age

Product Number: 41212-672-SG

Author: Nicci Eisenhauer

Publication Date: 2012

$20.00

The participation of sales, technical and marketing personnel in the development and implementation of an internet-based communications strategy that represents the company’s expertise in the format of education and information-sharing via various web-based tools will yield brand awareness, brand credibility and brand loyalty, while potentially shortening sales cycles.

Available for download

Industrial Protective Coating Tradeoffs: Understanding Why Industrial Coatings can be Complicated

Product Number: 41214-806-SG

Author: J. Peter Ault

Publication Date: 2014

$20.00

Industrial protective coatings can be surprisingly complicated for the inexperienced user or specifier. For example, when fabricating complex structures, the simple question of when during fabrication to paint can have an array of interesting cost and performance implications. Other issues include tradeoffs associated with degree of surface preparation and inspection for coating coverage. The paper will explore some of the reasons why they can be complicated in the context of four issues that can impact an industrial protective coatings project.

Available for download

Industry Standards: Are You Current?

Product Number: 41216-955-SG

Author: William D. Corbett

Publication Date: 2016

$20.00

Coating specifications frequently reference industry standards from organizations such as SSPC, ASTM, ISO and NACE. While specifications may reference a specific version or “year,” many simply state, “the latest version of the standard applies.” Many standards writing organizations require a review of the content of their documents every 5-years (or more frequently), and updates/revisions to standards can and oftentimes do occur. And new standards are developed and published to fill voids when a need for a standard is identified.

Available for download

Influence of AC on Hydrogen Permeation at Steel Under Cathodic Polarization

Product Number: 51315-5995-SG

ISBN: 5995 2015 CP

Author: Guenter Schmitt

Publication Date: 2015

$20.00

Available for download

Influence of Alloying Elements on the Electrochemical Behavior of Cantor High Entropy Alloys in Chloride Solutions

Product Number: 51323-18924-SG

Author: Emily Seto, Jing Liu, Haoxiang Wang

Publication Date: 2023

$20.00

Multi-principle element alloys (MPEAs) represent a new alloy development philosophy, where the base alloy has significant atom fractions of several elements. Among MPEAs, high entropy alloys (HEAs) are defined as alloys containing 5 or more principle elements. In 2004 Cantor et al. introduced Fe20Co20Cr-20Ni20Mn20 (H4Mn20), a 5-element equimolar HEA. It was found that this alloy formed a single FCC solid solution and solidified dendritically.

Available for download

Influence of Anodic Current on Corrosion Protection Conditions of Buried Steel Pipeline Under Cathodic Protection

Product Number: 51317--9021-SG

ISBN: 9021 2017 CP

Author: Tomoyuki Nagai

Publication Date: 2017

$20.00

The influence of anodic current on the corrosion protection conditions of buried steel pipelines at a potential less noble than -0.85 V was evaluated in test cells simulating the pipelines under long-term cathodic protection. Results are discussed.

Available for download

Influence Of Brine Precipitates On Materials Performance In Geothermal Applications

Product Number: 51323-18813-SG

Author: Anastasia Stoljarova, Ralph Bäßler, Simona Regenspurg

Publication Date: 2023

$20.00

Since geothermal reservoirs are a feasible energy source to replace fossil fuel supply, many technologies have been developed to take advantage of geothermal energy. Nevertheless, due to the chemical composition of hydrothermal fluids and temperatures, service conditions in geothermal facilities are demanding in many cases in terms of corrosion. Therefore, materials selection based on preliminary material qualification is essential to guarantee a secure and reliable operation of the facilities.

Available for download

Influence Of Cavitation Peening On The Propagation Of Stress Corrosion Cracks With Various Depths In Alloy 182 Exposed To PWR Primary Water

Product Number: ED22-17250_2-SG

Author: Mychailo Toloczko, Ryan Bouffioux, Chris Waskey, Darren Wood, Eric Visse, Sophie Maingot, Dojun Na, Daniel Brimbal, Antoine Marion, Maxime Berthaud, Jean Paul Massoud

Publication Date: 2022

$20.00

Alloy 600 and its weld alloys 182 and 82 are susceptible to Primary Water Stress Corrosion Cracking (PWSCC). Various mitigation techniques have been developed and qualified in recent years that aim to use compressive surface membrane stresses to prevent cracks from forming or to stop the growth of short cracks. As described in the parent article (“Part 1”), Ultra-High Pressure Cavitation Peening (UHPCP) developed by Framatome (previously AREVA NP) uses this approach to mitigate Alloy 600 and
Alloy 182 locations against PWSCC.

Available for download

Influence Of Cavitation Peening On The Propagation Of Stress Corrosion Cracks With Various Depths In Alloy 182 Exposed To PWR Primary Water

Product Number: ED22-17250_1-SG

Author: Daniel Brimbal, Antoine Marion, Chris Waskey, Darren Wood, Eric Visse, Sophie Maingot, Dojun Na, Mychailo Toloczko, Ryan Bouffioux, Maxime Berthaud, Jean Paul Massoud

Publication Date: 2022

$20.00

Alloy 600 and its weld alloys 182 and 82 are susceptible to Primary Water Stress Corrosion Cracking (PWSCC). These alloys have often been replaced in existing PWRs by Alloy 690 and weld alloys 152 or 52, but this is not always economical or technically feasible. Thus, PWR components fabricated from Alloys 600 and 182 are still in service worldwide in locations such as Bottom Mounted Instrumentation (BMI) penetrations where both the nozzle and the J-groove welds are potentially susceptible to PWSCC.

Available for download

Influence of Centerline Intermetallic Stringers on Pitting Corrosion Resistance of Superduplex Stainless Steels

Product Number: 51321-16298-SG

Author: Paulina Erazmus-Vignal Sayens /Vincent Vignal/Pauline HUGUENIN/Florent KRAJCARZ/Clément BOISSY/Saghi SAEDLOU/Patrick Toussaint

Publication Date: 2021

$20.00

Available for download

Influence Of Cold Deformation On Hydrogen Embrittlement By Determining The Critical Hydrogen Concentration In High Strength Steel For Wire Applications

Product Number: 51322-17639-SG

Author: M. Truschner, P. Gruber, J. Deutsch, J. Pengg, G. Mori, H. Köberl

Publication Date: 2022

$20.00

The threshold hydrogen content of a material regarding hydrogen embrittlement plays an increasingly important role in corrosion research. This value indicates the hydrogen content to which the material can be used without failure. However, when determining the threshold hydrogen content, different test methods, different analysis methods and different interpretations of the results come together. This paper is intended to provide a guideline for the determination of the critical hydrogen concentration of high strength steel wire samples.

Individual Conference Papers

Association for Materials Protection and Performance